• Journal of Multimedia Information System
• /
• 제5권4호
• /
• pp.245-256
• /
• 2018

This study estimated rainfall information more effectively by image signals through the information system of weather radar. Based on this, we suggest the way to estimate quantitative precipitation utilizing overlapped observation area of radars. We used the overlapped observation range of ground hyetometer observation network and radar observation network which are dense in our country. We chose the southern coast where precipitation entered from seaside is quite frequent and used Sungsan radar installed in Jeju island and Gudoksan radar installed in the southern coast area. We used the rainy season data generated in 2010 as the precipitation data. As a result, we found a reflectivity bias between two radar located in different area and developed the new quantitative precipitation estimation method using the bias. Estimated radar rainfall from this method showed the apt radar rainfall estimate than the other results from conventional method at overall rainfall field.

• ETRI Journal
• /
• 제45권2호
• /
• pp.226-239
• /
• 2023

Challenges in cognitive radio and tactical communications include recognizing anonymously received signals and estimating parameters in a blind or semi-blind manner. In this paper, we examine this issue for orthogonal frequency division multiplexing (OFDM) signaling. There are several parameters in OFDM signaling, and the blind receiver must extract and consider the synchronization issue. We assume that the blind receiver is aware of modulation type, OFDM, and not aware of chip duration and the length of cyclic prefix. First, we present new criteria based on kurtosis to estimate these parameters and compare their performance at different levels of additive white Gaussian noise with methods based on correlation, kurtosis, maximum likelihood, and matched filter. Then, we perform synchronization and estimate the start time based on these criteria and several new criteria in two steps: fine and coarse synchronization. Finally, in a more practical setup, we present the idea of jointly estimating the mentioned parameters and the signal start time as coarse synchronization. We compare different criteria and show that one of the proposed criteria has the highest efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2641-2647
• /
• 2003

Conventional DLLs estimate the delay times of satellite signals individually and feed back these measurements to the VCO independently. But VDLL estimates delay times and user position directly and then estimate the feedback term for VCO using the estimated position changes. In this process, input measurements are treated as vectors and these vectors are used for navigation. First advantage of VDLL is that noise is reduced in all of the tracking channels making them less likely to enter the nonlinear region and fall below threshold. Second is that VDLL can operate successfully when the conventional independent parallel DLL approach fails completely. It means that VDLL receiver can get enough total signal power to track successfully to obtain accurate position estimates under the same conditions where the signal strength from each individual satellite is so low or week that none of the individual scalar DLL can remain in lock when operating independently. To operate VDLL successfully, it needs to know the initial user dynamics and position and prevents total system from the divergence. The suggested integration method is to use the inertial navigation system to provide initial dynamics for VDLL and to maintain total system stable. We designed the GPS/INS integrated navigation system. This new type of integrated system contained the vector pseudorange format generation block, VDLL signal processing block, position estimation block and the conversion block from position change to delay time feedback term aided by INS.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.702-710
• /
• 2008

In this paper, the observability of the INS/GPS integrated system for a land vehicle is analyzed on measurements and different filters with respect to the measurements are designed. In the stationary case, it is shown that horizontal accelerometer biases and vertical attitude errors and gyro biases are unobservable. An 8-state filter is designed based on the observability analysis. When GPS signal is available, a 15-state filter is used with position and velocity measurements. To estimate the INS errors even in the case that GPS signal is blocked a filter is designed in consideration of the non-holonomic constraints of a land vehicle. In this case, the horizontal position and velocity errors and vertical attitude error are unobservable. However, a 12-state filter including the velocity states is designed to estimate the accelerometer biases. When GPS signal recovers, a 9-state filter is used excluding the sensor biases. This paper presents a multi-dimensional filter that switches the four filters according to the usable measurements and maneuver environments. A simulation is carried out to verify the performance of the proposed filter.

• Journal of Communications and Networks
• /
• 제14권4호
• /
• pp.396-409
• /
• 2012

With the proliferation of diverse wireless devices, there is an increasing concern about the security of location information which can be spoofed or disrupted by adversaries. This paper investigates the characterization and detection of location spoofing attacks, specifically those which are attempting to falsify (degrade) the position estimate through signal strength based attacks. Since the physical-layer approach identifies and assesses the security risk of position information based solely on using received signal strength (RSS), it is applicable to nearly any practical wireless network. In this paper, we characterize the impact of signal strength and beamforming attacks on range estimates and the resulting position estimate. It is shown that such attacks can be characterized by a scaling factor that biases the individual range estimators either uniformly or selectively. We then identify the more severe types of attacks, and develop an attack detection approach which does not rely on a priori knowledge (either statistical or environmental). The resulting approach, which exploits the dissimilar behavior of two RSS-based estimators when under attack, is shown to be effective at detecting both types of attacks with the detection rate increasing with the severity of the induced location error.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2108-2113
• /
• 2010

The Long Term Evolution (LTE) system is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the lattice-type pilot samples in the multipath fading channel environment. The estimation of the channel frequency response (CFR) makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time- and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. Any interpolation scheme could be adopted for this purpose. Depending on the requirements of the target system, we may choose a simple linear interpolation or a sophisticated one. For any choice of an interpolation scheme, these is a trade-off between estimation accuracy and numerical cost. For those wireless communication systems based on the OFDM and the preamble-type pilot structure, the DFT-based channel estimation and its variants have been successfully. Yet, it may not be suitable for the lattice-type pilot structure, since the pilot samples are not sufficient to provide an accurate estimate and it is known to be sensitive to the location as well as the length of the time-domain window. In this paper, we propose a simple interpolated based on the upsampling mechanism in the multirate signal processing. The proposed method provides an excellent alternative to the DFT-based methods in terms of numerical cost and accuracy. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification.

• 한국정보통신학회논문지
• /
• 제14권2호
• /
• pp.277-286
• /
• 2010

이동통신 시스템에서 발생하는 큰 문제점 중의 하나는 다중 경로에 의한 신호 진폭의 감쇄 현상인 페이딩을 들수 있다. 이 때 동기시스템에서 maximum a posteriori 신호 위상 추정값의 분산에 대한 Cramer-Rao bound를 고찰하여 수신신호의 위상을 추정한다. 나카가미 페이딩 채널에서의 위상의 분산값에 대한 Cramer-Rao 하한치를 발견하기 위해서 위상에 대한 확률 밀도 함수를 이용한다. 또한 순서통계량을 이용하여 일반화된 선택 합성기법에 대한 오류 확률식을 유도하여 적절한 다이버시티 가짓수를 분석하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.102-105
• /
• 2002

A noise reduction technique to reduce background noise in corrupted voice is proposed. The proposed method is based on linear prediction and takes advantages of periodicity of voiced speech. A voiced sound is regarded as a periodic stationary signal in short time interval. Therefore, the current voice signal is correlated with the voice signal delayed by a pitch period. A linear predictor can estimate only the current signal correlated with the delayed signal. Therefore, the enhanced voice can be obtained as output of the linear predictor. Simulation results show that the proposed method is able to reduce the background noise.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1109-1110
• /
• 2008

It is required to optimize the system operation efficiency to allocate maintenance task and period using systemic maintenance process. To allocate maintenance task and period must analysis the failure distribution mode at first. In this paper, we introduce the linear regression analysis and estimate the failure distribution for the railroad signal equipment using that.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.247-251
• /
• 2003

The velocity of train which is measured from pulse generator attached to TM is used for displaying or control signal of inverter and so on. Measured signals increase and decrease step-by-step by pulse counting or monotonously by F/V conversion. But noises and signal distortions by measuring error like alias make it difficult to provide correct velocity infomation and estimate the acceleration. In this paper, we investigated the performance of Smoothing method for suppressing the noises in velocity signals. And the difference between Smoothed signal and origin velocity signals is inspected and the comparison with low pass filtering show applicable of Smoothing method for noise rejection and the estimation of signal. Finally, acceleration curves estimated from Smoothing method are compared with real accelerator signal attached to train.