• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2668-2717
• /
• 2021

Demands for high-speed wireless data services grow rapidly. It is a big challenge to increasing the network capacity operating on licensed spectrum resources. Unlicensed spectrum cellular networks have been proposed as a solution in response to severe spectrum shortage. Licensed Assisted Access (LAA) was standardized by 3GPP, aiming to deliver data services through unlicensed 5 GHz spectrum. Furthermore, the 3GPP proposed 5G New Radio-Unlicensed (NR-U) study item. On the other hand, artificial intelligence (AI) has attracted enormous attention to implement 5G and beyond systems, which is known as Intelligent Radio (IR). To tackle the challenges of unlicensed spectrum networks in 4G/5G/B5G systems, a lot of works have been done, focusing on using Machine Learning (ML) to support resource allocation in LTE-LAA/NR-U and Wi-Fi coexistence environments. Generally speaking, ML techniques are used in IR based on statistical models established for solving specific optimization problems. In this paper, we aim to conduct a comprehensive survey on the recent research efforts related to unlicensed cellular networks and IR technologies, which work jointly to implement 5G and beyond wireless networks. Furthermore, we introduce a positioning assisted LTE-LAA system based on the difference in received signal strength (DRSS) to allocate resources among UEs. We will also discuss some open issues and challenges for future research on the IR applications in unlicensed cellular networks.

• Geomechanics and Engineering
• /
• v.24 no.2
• /
• pp.157-166
• /
• 2021

This paper aims at the temperature and slenderness ratio effects on physical and mechanical properties of Beishan granite. A series of uniaxial compression tests with various slenderness ratios and temperatures were carried out, and the acoustic emission signal was also collected. As the temperature increases, the fracture aperture of intercrystalline cracks gradually increases, and obvious transcrystalline cracks occurs when T > 600℃. The failure patterns change from tensile failure mode to ductile failure mode with the increasing temperature. The elastic modulus decreases with the temperature and increases with slenderness ratio, then tends to be a constant value when T = 1000℃. However, the peak strain has the opposite evolution as the elastic modulus under the effects of temperature and slenderness ratio. The uniaxial compression strength (UCS) changes a little for the low-temperature specimens of T < 400℃, but a significant decrease happens when T = 400℃ and 800℃ due to phase transitions of mineral. The evolution denotes that the critical brittle-ductile transition temperature increases with slenderness ratio, and the critical slenderness ratio corresponding to the characteristic mechanical behavior tends to be smaller with the increasing temperature. Additionally, the AE quantity also increases with temperature in an exponential function.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.6
• /
• pp.81-88
• /
• 2022

Titanium alloy (Ti-6Al-4V) has excellent mechanical properties and high specific strength; therefore, it is widely used in aerospace, automobile, defense, engine parts, and bio fields. Particularly in the aerospace field, as it has a low specific gravity and rigidity, it is used for the purpose of increasing energy efficiency through weight reduction of parts, and most have a thin-walled structure. However, it is extremely difficult to machine thin-walled shapes owing to vibration and deformation. In the case of thin-walled structures, the cutting forces and vibrations rapidly increase depending on the cutting conditions, significantly affecting the surface integrity and tool life. In this study, machining experiments on thin-wall milling of a titanium alloy (Ti-6Al-4V) were conducted for each experimental condition with different axial depths of cut, radial depth of cut, and machining sequence. The machining characteristics were analyzed, and an effective machining method was derived by a comprehensive analysis of the machined surface conditions and cutting signals.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.92-100
• /
• 2023

Wireless communication technology is becoming increasingly prevalent in smart factories, but the rise in the number of wireless devices can lead to interference in the ISM band and obstacles like metal blocks within the factory can weaken communication signals, creating radio shadow areas that impede information exchange. Consequently, accurately determining the radio communication coverage range is crucial. To address this issue, a Radio Environment Map (REM) can be used to provide information about the radio environment in a specific area. In this paper, a technique for estimating an indoor REM usinga mobile robot and machine learning methods is introduced. The mobile robot first collects and processes data, including the Received Signal Strength Indicator (RSSI) and location estimation. This data is then used to implement the REM through machine learning regression algorithms such as Extra Tree Regressor, Random Forest Regressor, and Decision Tree Regressor. Furthermore, the numerical and visual performance of REM for each model can be assessed in terms of R2 and Root Mean Square Error (RMSE).

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.561-562
• /
• 2021

시대가 발전함에 따라 무선통신 기술인 사물인터넷이 점차 성장하고 있으며 모바일 중심으로 IT환경이 재편됨에 따라 전자상거래의 결제방식 또한 변화하고 있다. IT시대에 맞춰 개인의 실시간 위치정보를 기반으로 홍보할 수 있는 지능적 마케팅 수단으로 하이브리드 비콘을 활용하여 고객이 매장근처를 지나치거나 방문할 때, 프로모션 및 쿠폰 정보를 전송하여 실시간 마케팅이 가능하게 한다. 하이브리드 비콘은 고주파의 특성상 매장 안팎의 고객 위치를 정교하게 구분 및 제공할 수 있으며, 블루투스의 연결이 끊기더라도 일정시간 동안 마케팅 서비스를 제공하는 강점이 있다. 본 논문에서는 하이브리드 비콘의 고주파와 저전력에 대한 강점을 활용하여 오프라인 매장에서의 고객에게 프로모션 정보나 모바일 적립 서비스를 제공함으로서 오프라인 시장의 마케팅 및 O2O시장 성장을 목표로 한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.43-49
• /
• 2022

FMCW(Frequency Modulated Continuous Wave) Radar is very useful for vehicle collision warning system and autonomous driving sensor. In this paper, the design and implementation of FMCW radar based on two chip MMIC developed as an autonomous driving sensor was described. Especially, generation of frame-based and chirp-based waveform generation and signal processing are mixed to have the strength of maximum detection speed and compensation of speed. This implemented system was analyzed for performance and commercialization potential through lab. test and driving test in K-city.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1207-1210
• /
• 2008

무선 센서 네트워크는 고정 인프라 없이 센서 노드만으로 정보를 수집하는 네트워크로서 센서들의 위치정보 식별은 매우 중요하다. 센서 노드간 거리 측정은 신호의 도착시간차(Time of Arrival: ToA), 신호세기(Received Signal Strength: RSS), 신호각도(Angle of Arrival: AoA)에 기반을 둔 방법 등이 있다. 무선 센서 네트워크에 배치되어 있는 각 센서 노드간 정확한 거리 식별을 위해 기존의 거리 측정 방법을 보완하여 거리 오차를 줄이는 ToA기반의 RSS보정 방법을 제안한다. 구체적으로 초음파를 통한 거리측정 값에 맵(RF-MAP)을 통해 보정한 RSS값을 가중치로 보정하여 기존의 거리 측정 방법보다 측정오차를 줄였다. 실험을 통해 제안한 방법은 기존 ToA보다 실내(5m×7m)에서 평균 0.1cm, 실외(10m×10m) 평균 0.6cm 측정 오차를 줄일 수 있음을 확인 할 수 있었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.483-496
• /
• 2024

This paper proposes a location-based inter-beam handover event considering terminal mobility to enhance the service quality for terminals in satellite networks. The terminal continuously measures the distance between the serving cell and neighboring cell centers, and checks whether the handover event condition is satisfied, taking into account the terminal's velocity. Performance analysis results demonstrate that the proposed location-based handover event reduces the frequency of unnecessary handover event triggering compared to the conventional received signal strength-based handover event, thereby improving the service continuity of the terminal.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.225-231
• /
• 2024

In this article, a new approach is presented to improve the unchangeable function of a ready-made millimeter-wave antenna system. By designing a metamaterial surface appropriate for the given geometry and fixed electrical characteristics of the device, the properties of the radiated fields of the RF product are changed to have directivity and higher antenna gain. Unlike other designs using periodic metamaterials for a single patch, an aperiodic metasurface is developed to handle two patches. For a higher received signal strength and a longer RF path in the 24 GHz-radio link, an aperiodic metasurface enhances the radiated fields by 10 dB.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.61-67
• /
• 2010

After selecting five types of adhesive epoxy resin for metallic cultural assets such as $Araldite^{(R)}$ rapid type, $Devcon^{(R)}$, $Araldite^{(R)}$ SV427+HV427, $CDK^{(R)}$520, $Araldite^{(R)}$ AW106+HV953 which had already been studied, this paper approached more closely the problem of yellowing and the signal of aging with time passing by connecting the problems with the safety of metallic cultural assets. The change of physical properties according to the change of state of epoxy adhesives was investigated through the change of flexural strength and the change of surface hardness by artificially providing the possible environmental change factors such as ultra-violet ray, and acid base, and how the epoxy chemically changes in its ingredients by the environment was analyzed through FT-IR. As a result of the experiment, for the most part of adhesives brought about the physical change of flexural strength, the change of surface hardness, and the chemical change of chemical ingredients as the product of alcohol, which were respectively different according to the time of ultraviolet irradiation, and acid base change. Under most of the conditions, SV427+HV427 and $CDK^{(R)}$520 were fairly stabilized under each condition of weatherability, but it seems that they should be refrained from being applied in case that the area to restore is thin and wide because the degree of flexural strength of themselves is low. Also, it is found that the preservation environment is very important not only for artifacts but also for the preservation of resins sused for preservation treatment.