• 전기학회논문지
• /
• 제65권10호
• /
• pp.1746-1754
• /
• 2016

In this paper, we provide a development and evaluation method for an archery posture analyzing system, using an inertial sensor. The system was developed using LabVIEW2014 by National Instruments and evaluated using the DTW algorithm. To convert the voltage value of the inertial sensor into a physical value, a coordinate transformation matrix bias was applied. To evaluate the similarity of movement in archery shooting, the DTW distance was calculated and similarity was confirmed based on simple mechanical movement, the same person's shooting movement, shooting movement with another person, and the noise signal. The average similarity comparison results were as follows: simple mechanical movement was 17.05%, the same person's shooting movement was 26.48%, shooting movement with another person was 62.8%, and the noise signal was 328.5%; a smaller value indicates a higher level of similarity. We confirmed the possibility of analyzing the archery posture using 3-axis acceleration of the inertial sensor. We inferred that the proposed method might be important means for assessing shooting skills, evaluation of archer's progress, and finding talented archers in advance.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1172-1183
• /
• 2012

Aure's tonality was considered as the sound metrics for the expression of the tonality of gear whine sound in a previous research. It was failed to use the Aure's tonality as a sound metric for the tonal impression. Thus Aures's tonality, was developed for tonal impression in previous research. However, this metric did not express well the tonality of gear whine sound since the whine sound is a non-stationary signal with frequency modulation and amplitude modulation. In this study, the new method for the tonality evaluation for a non-stationary signal is presented. It is developed based on the prominence ratio, tonality impression function, and lower threshold level. It improves the accuracy and reliability of the sound quality index being used for the sound quality evaluation of the axle-gear whine sound.

• 한국위성정보통신학회논문지
• /
• 제11권4호
• /
• pp.74-80
• /
• 2016

본 논문에서는 정지궤도위성신호분석을 수행하는 정지궤도위성신호 수신분석 도구모델, 정지궤도위성 항법 메시지 분석을 수행하는 정지궤도 메시지 분석도구 모델로 구성된 위성통신국의 운용시험평가 도구의 모델링과 구현결과를 기술한다. 또한, 이러한 위성 통신국의 운용시험평가 도구에 시뮬레이션된 신호를 생성하여 제공할 수 있는 GEO위성과 위성통신국의 소프트웨어 모델의 일부를 소프트웨어적으로 모델링하고 구현한 결과를 기술하였다.

• 한국철도학회논문집
• /
• 제2권2호
• /
• pp.21-30
• /
• 1999

This study proposes the analysis and evaluation method of time series ultrasonic signal using the phase space-frequency domain. Features extracted from time series signal analyze quantitatively characteristics of weld defects. For this purpose, analysis objectives in this study are features of time domain and frequency domain. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange even though the types of defects are identified. These differences in characteristics of weld defects enables the evaluation of unique characteristics of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hole) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimension. Proposed phase space-frequency domain method in this study can integrity evaluation for defect signals of rail weld zone such as side hole and crack.

• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.108-118
• /
• 1998

This study proposes th analysis and evaluation method of time series ultrasonic signal using the chaos feature extraction for ultrasonic pattern recognition. Features extracted from time series data using the chaos time series signal analyze quantitatively weld defects. For this purpose, analysis objective in this study is fractal dimension and Lyapunov exponent. Trajectory changes in the strange attractor indicated that even same type of defects carried substantial difference in chaosity resulting from distance shifts such as 0.5 and 1.0 skip distance. Such differences in chaosity enables the evaluation of unique features of defects in the weld zone. In quantitative chaos feature extraction, feature values of 4.511 and 0.091 in the case of side hole and 4.539 and 0.115 in the case of vertical hole were proposed on the basis of fractal dimension and Lyapunov exponent. Proposed chaos feature extraction in this study can enhances ultrasonic pattern recognition results from defect signals of weld zone such as side hole and vertical hole.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1065-1074
• /
• 1999

This study proposes the analysis and evaluation method of time series ultrasonic signal using the chaotic feature extraction for ultrasonic pattern recognition. Features extracted from time series data using the chaotic time series signal analysis quantitatively welding defects. For this purpose analysis objective in this study is fractal dimension and Lyapunov exponent. Trajectory changes in the strange attractor indicated that even same type of defects carried substantial difference in chaoticity resulting from distance shills such as 0.5 and 1.0 skip distance. Such differences in chaoticity enables the evaluation of unique features of defects in the weld zone. In experiment fractal(correlation) dimension and Lyapunov exponent extracted from 6dB ultrasonic defect signals of weld zone showed chaoticity. In quantitative chaotic feature extraction, feature values(mean values) of 4.2690 and 0.0907 in the case of porosity and 4.2432 and 0.0888 in the case of incomplete penetration were proposed on the basis of fractal dimension and Lyapunov exponent. Proposed chaotic feature extraction in this study enhances ultrasonic pattern recognition results from defect signals of weld zone such as vertical hole.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.43-50
• /
• 2020

In this paper a low power Spreading Code Authentication (SCA) sequence with a BPSK(1) modulation at a frequency offset of +7.161 MHz is tested for authentication purposes, the Galileo E1OS is used as base signal. The tested signals comprise a Galileo constellation with 5 satellites including the Galileo OS Navigation Message Authentication (OSNMA) and a low power offset BPSK (OBPSK(7,1)) as SCA component. The signals are generated with the software based MuSNAT-Signal-Generator. The generated signals were transmitted Over-The-Air (OTA) using a Software-Defined-Radio (SDR) as pseudolite. With a real-environment-testbed the performance of the SCA in real channel conditions (fading and multipath) was tested. A new SCA evaluation scheme is proposed and was implemented. Under real channel conditions we derive experimental threshold values for the new SCA evaluation scheme which allow a robust authentication. A Security Code Estimation and Replay (SCER) spoofing attack was mimicked on the real-environment-testbed and analyzed with the SCA evaluation scheme. It was shown that the usage of an OBPSK is feasible as an authentication method and can be used in combination with the OSNMA to improve the authentication robustness against Security SCER attacks.

• 감성과학
• /
• 제5권1호
• /
• pp.17-24
• /
• 2002

본 연구는 객관적인 생리신호로부터 인간의 감성을 추론할 수 있는 감성평가 전문가 시스템을 개발하기 위한 첫 번째 단계로 측정된 생리신호를 이용하여 인간의 긴장도를 판단하는 알고리즘의 개발을 목표로 한다. 감성평가와 관련된 애매함을 수리적으로 취급하기 위해 퍼지이론을 적용하여 임의의 감성영역에 속하는 정도를 소속함수로 정량화함으로써 감성평가를 가능하게 하고자 하였다. 소속함수의 결정은 상상을 통해 유발된 긴장/이완의 생리신호 데이터베이스 결과를 사용하였다. 그리고 두 가지 이상의 생리신호 측정결과와 각 생리신호의 소속함수로부터 하나의 최종결과(긴장도)를 유추하기 위해서 Dempster-Shafer증거합 법칙을 적용하였고, 이를 통해 최종적인 긴장도를 도출할 수 있도록 하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3672-3684
• /
• 2015

Recently, the standardization of backward compatible JPEG image coding for high dynamic range (HDR) image has been undertaken to establish an international standard called "JPEG XT." The JPEG XT consists of two layers: the base layer and the residual layer. The base layer contains tone mapped low dynamic range (LDR) image data and the residual layer contains the error signal used to reconstruct the HDR image. This paper gives the result of a study to evaluate the overall performance of tone mapping operators (TMOs) for this standard. The evaluation is performed using five HDR image datasets and six TMOs for profiles A, B, and C of the proposed JPEG XT standard. The Tone Mapped image Quality Index (TMQI) and no reference image quality assessment (NR IQA) are used for measuring the LDR image quality. The peak signal to noise ratio (PSNR) is used to evaluate the overall compression performance of JPEG XT profiles A, B, and C. In TMQI and NR IQA measurements, TMOs using display adaptive tone mapping and adaptive logarithmic mapping each gave good results. A TMO using adaptive logarithmic mapping gave good PSNRs.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.169-176
• /
• 1994

본 논문에서는 조합회로에 있어서 고장 시뮬레이션의 고속화를 위한 효율적인 병렬 평가 알고리듬을 제안한다. 제안한 알고리듬은 고장소자의 평가 및 전파에 있어서 병렬법, 연역법 그리고 동시법의 장점을 이용하고 있기 때문에 시뮬레이션의 고속화를 실현할 수 있을 뿐만 아니라 다치(multi-valued) 신호를 쉽게 취급할 수 있다. 또한, 동일한 신호선에서 발생하는 액티브(active)고장을 동일한 고장 그룹으로 할당하므로써 병렬연산의 효율을 증가시키기 위한 고장의 그룹화(fault grouping) 방법을 제안한다. 제안한 알고리듬은 C언어로 구현하였으며, ISCAS '85 Benchmark 회로에 대한 실험 결과 종래의 동시법과 비교하여 약 2.6배에서 8.2배 정도의 고속화가 실현되었다.