• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.1
• /
• pp.11-22
• /
• 1997

It is very essential to get the accurate classification of defects in primary pressure vessel and piping welds for the safety of nuclear power plant. Ultrasonic testing has been widely applied to inspect primary pressure vessel and piping welds of nuclear power plants during PSI / ISI. Classification of flaws in weldments from their ultrasonic scattering signals is very important in quantitative nondestructive evaluation. This problem is ideally suited to a modern ultrasonic Pattern recognition technique. Here, a brief discussion on systematic approach to this methodology is presented including ultrasonic feature extraction, feature selection and classification. A stronger emphasis is placed on Fuzzy-UTSCS (UT signal classification system) as efficient classifiers for many practical classification problems. As an example Fuzzy-UTSCS is applied to classify flaws in ferrite pressure vessel weldments into two types such as linear and volumetric. It is shown that Fuzzy-UTSCS is able to exhibit higher performance than other classifiers in the defect classification.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.311-319
• /
• 2008

Evaluation of an amplitude domain reflectometry (ADR) type soil moisture sensor as ThetaProbe ML2x using the response of frequency impedance was performed in a variety of soil porous media such as Jumunjin standard sand, weathered granite soil at Sangju area, and weathered gneiss soil at Jangsu area. The tested soils were classified with a dried condition and a wetted condition for comparing with soil volumetric water content under different installed depths of the measurement sensor. In the results the part of measurement rod including one signal rod and three shield rod 6cm in length was found to decrease the variation of measurement output voltage with insert 5cm over into the soil porous media. The measurement output voltage was verified to more stable output voltage under weathered granite soils and weathered gneiss soils contained the fine grain materials such as clay and silt minerals than the gradual grain material like as the standard sands. Therefore, measurement values by soil moisture sensor can be offered the more stable values when an contact volume between soil porous media and measurement sensor increase.

• Journal of Internet Computing and Services
• /
• v.8 no.4
• /
• pp.1-9
• /
• 2007

Decision fusion in wireless sensor networks under non-Gaussian noise channels is studied. To consider the tail behavior noise distributions, we use a exponentially-tailed distribution as a wide class of noise distributions. Based on a canonical parallel fusion model with fading and noise channels, the likelihood ratio(LR) based fusion rule is considered as an optimal fusion rule under Neyman-Pearson criterion. With both high and low signal-to-noise ratio (SNR) approximation to the optimal rule, we obtain several suboptimal fusion rules. and we propose a simple fusion rule that provides robust detection performance with a minimum prior information, Performance evaluation for several fusion rules is peformed through simulation. Simulation results show the robustness of the Proposed simple fusion rule.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.223-231
• /
• 2010

The uniqueness of Korean funeral culture has produced the problems such as forest indiscreet cemetery development and increase of cemeteries for those without surveying family due to negligent management. To solve these problems, government and social organization have recommended a use of cremation, charnel house and cemetery. The objective of this study is to develop a cemetery information management system which cemetery managers who are GIS laypersons are able to understand GIS functions easily and use conveniently. Cemetery tasks should be done not only in the office but also at the field. In the office, they perform GIS functions like input, modification and so forth using a desktop. And at the field, they perform the functions like simple input, inquiry using a PDA(Touchscreen) that can receive GPS signal. As various open source softwares were used to build the system, the expense was reduced largely, and we could expect the possibility that it can be utilized in more cemeteries by adding more various functions.

• Genomics & Informatics
• /
• v.10 no.3
• /
• pp.167-174
• /
• 2012

AKT is a signal transduction protein that plays a central role in the tumorigenesis. There are 3 mammalian isoforms of this serine/threonine protein kinase-AKT1, AKT2, and AKT3-showing a broad tissue distribution. We first discovered 2 novel polymorphisms (AKT2 -9826 C/G and AKT3 -811 A/G), and we confirmed 6 known polymorphisms (AKT2 -9473 C/T, AKT2 -9151 C/T, AKT2 -9025 C/T, AKT2 -8618G/A, AKT3 -675 A/-, and AKT3 -244 C/T) of the AKT2 and AKT3 promoter region in 24 blood samples of Korean lung cancer patients using direct sequencing. To evaluate the role of AKT2 and AKT3 polymorphisms in the risk of Korean lung cancer, genotypes of the AKT2 and AKT3 polymorphisms (AKT2 -9826 C/G, AKT2 -9473 C/T, AKT2 -9151 C/T, AKT2 -9025 C/T, AKT2 -8618G/A, and AKT3 -675 A/-) were determined in 360 lung cancer patients and 360 normal controls. Statistical analyses revealed that the genotypes and haplotypes in the AKT2 and AKT3 promoter regions were not significantly associated with the risk of lung cancer in the Korean population. These results suggest that polymorphisms of the AKT2 and AKT3 promoter regions do not contribute to the genetic susceptibility to lung cancer in the Korean population.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1409-1418
• /
• 1998

The recent audio CODEC(Coding/Decoding) algorithms are complex of several coding techniques, and can be divided into DSP tasks, controller tasks and mixed tasks. The traditional DSP processor has been designed for fast processing of DSP tasks only, but not for controller and mixed tasks. This paper presents a new architecture that achieves high throughput on both controller and mixed tasks of such algorithms while maintaining high performance for DSP tasks. The proposed processor, YSP-3, operates four algorithms while maintaining high performance for DSP tasks. The proposed processor, YSP-3, operates functional units (Multiplier, two ALUs, Load/Store Unit) in parallel via 4-issue super-scalar instruction structure. The performance evaluation of YSP-3 has been done through the implementation of the several DSP algorithms and the part of the AC-3 decoding algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.827-833
• /
• 2012

The receiver performance is degraded by nonlinear memory problem in communication system. The pre-distorter techniques are an effective technique to compensate for the nonlinear distortion of the HPA without memory effects. However, memory effect of HPA can no longer be ignored when data signal is transmitted in high speed. Many adaptive pre-distorter schemes have been studied to compensate for memory effect problem of HPA in transmitter. The complexity and cost of satellite will increase when using adaptive pre-distorter in satellite communication system. In this paper, we propose receiver feedback closed loop pre-distortion technique in order to compensate for nonlinear problem of HPA with memory problem. The purpose of this paper is to reduce complexity and cost of satellite design by using only pre-distorter at terrestrial station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.86-97
• /
• 2009

RTLS is a system for automatically locating and tracking people and objects. The TDOA-based RTLS determines the location of the tag by calculating the time differences of a signal received from the tag. In TDOA-based RTLS, time synchronization is essential to calculate the time difference between readers. This paper presents a precision time synchronization method for TDOA-based RTLS over IEEE 802.15.4. In order to achieve precision time synchronization in IEEE 802.15.4 radio, we analyzed the error factors of delay and jitter. We also deal with the implementation of hardware assisted time stamping and the Kalman filtering method to minimize the error factors. In addition, this paper described the experiments and performance evaluation of the proposed precision time synchronization method in IEEE 802.15.4 radio. The results show that the nodes in a network can maintain their clocks to within 10 nanoseconds offset from the reference clock.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.657-665
• /
• 2000

In this study, the bit error rate(BER) performance for the speech and data traffic is evaluated by results of the reverse link simulation of CDMA-based IMT-2000. Simulations in the reverse link are achieved for indoor, pedestrian, and vehicular environments, which are provided by ITU-R . Also, in the these simulations, the fast power control of 1.6kHz rate is applied. The amplitude and phase of the fading signal are estimated by using the 5-tap FIR filter, and the soft-decision Viterbi and Reed-Solomon (RS) decoding are applied. Simulation results provide the optimum ratio of pilot power to traffic power, the BER performance according to the number of fingers, and performance comparison between convolutional code and concatenated code at $10^-6$ BER in 5 MHz system.

• Journal of the Korean Magnetics Society
• /
• v.20 no.2
• /
• pp.45-51
• /
• 2010

We suggest the algorithm that it detects volume and shape according with a variation of magnetic field in non-contact electromagnetic measurement system. It is possible to assess an object shape through a variation of magnetic field. The basic idea is compared a length difference with a variation of magnetic field in a detected object and a circle which modeled equivalent area. And the shape is detected to many calibration process that it is similar to signal pattern between a length difference and a variation of magnetic field in object and equivalent circle. This is the shape detection algorithm that use only the variation of magnetic field. In this paper, it has application to the shape detection algorithm about the object as hexagon, pentagon, rectangle, trigon. we can detect the object shape easily because the shape detection algorithm is only used to the variation of magnetic field.