• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1232-1240
• /
• 2005

The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S (wind turbine system) and carries out the evaluation analysis during operating W.T.S. To investigate the dynamic behavior characteristic of W.T.S, the experiments to measure vibration of the blade from the attached accelerometer on the flap and edge section of the blade that is one of the most important elements of dynamic characteristic of W.T.S are performed. Natural frequency and mode shape are calculated with commercial program ( ANSYS) using the measured vibration acceleration that receives the signal with F.F.T Analyzer from the accelerometer For validation of these experiments, the finite element analysis is performed with commercial F.E.M program (ANSYS) on the basis of the natural frequency and mode shape. The results indicate that experimental values have good agreements with the finite element analysis.

• 비파괴검사학회지
• /
• 제26권4호
• /
• pp.231-238
• /
• 2006

위상 배열 초음파 기법을 이용한 국내 표준형 윈전 저압 터빈의 디스크 검사에 대하여 연구하였다. 이를 위하여 디스크 mockup을 제작하고 결함을 가공하였으며 결함에 대한 검출과 길이 측정 방법에 따른 결과를 고찰하였다. 깊이 측정에서 릴은 결함은 AATT(absolute arrival time technique)방법 혹은 RATT (relative arrival time technique)방법을 사용하여 깊이를 측정할 수 있었으나, 조기에 발견하여야 할 깊이가 깊지 않은 결함은 이와 같은 방법으로 깊이를 측정할 수 없었다. 이 경우 결함 신호가 나타나는 각도 범위를 이용하여 결함 깊이를 측정하였으며 유용한 도구임을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.602-608
• /
• 2006

In order to evaluate performance of anti-vibration gloves, it is necessary to measure the transmitted vibration to the hand and the applied forces at the same time while gripping the vibrating handle. In the study a system was developed to measure both the vibration and the forces. The system consists of a measurement handle with eight strain gauges and two accelerometers and a PC-based system with a software for signal processing and evaluation of the hand-transmitted vibration and for control of applied forces in the pre-determined range. The handle was installed on the vibration shaker which is strong enough so as not to be affected by dynamic coupling with the hand-arm system. Whole procedure of ISO 10819 to determine the vibration transmissibility of anti-vibration gloves was programmed into the system. As an example of the application, three subjects joined the test to get vibration transmissibilities of anti-vibration gloves where each glove was tested twice a subject. Average and standard deviation of vibration transmissibility were also calculated.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.563-575
• /
• 2007

This contribution contained the classical work of an open-hole tensile plate to demonstrate the performance of grating shearography and to compare with the results obtained by other full-field measurement techniques, The isotropic plate with an open-hole has often appeared in the previous contributions introducing novel full-field method and system. Grating shearography directly provided six quantitative measurands about the specimen's surface kinematics by using a single measurement set: three in-plane strains, in plane rotation, and two out-of-plane slopes. The quasi-plane wavefront of grating metrology led to high signal-to-noise ratio (SNR) and thus neither fitting nor filtering was applied, and the small shearing distance of $101{\mu}m$ could be used. The small shearing distance provided the outstanding spatial resolution of $80{\mu}m$ and sensitivity appropriate for experimental mechanics. Finally, the grating shearography enabled the visualization of the complex surface deformation around the hole and also detected parasitic flexions of the specimen in the micrometer regime during the tensile test.

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.499-506
• /
• 1996

Blood flow velocimeter is an essential device to measure the blood flow in skin tissue. In this study, we developed a high-speed LDV(laser Doppler Velocimeter) that has real time processing capability using a DSP(digital signal processing) chip and is able to continuously measure information about blood-flow based on a noninvasive method using self-mixing type laser diode. This LDV system has a simpler structure than any other typical blood flow velocimeter and is composed of new self-mixing probe, stabilizer circuits DSP board, and interf'ace boule We measured velocity of speaker-unit by operational frequencies to identify Doppler effect of this system, performed clinical experiment on bare finger tip and compared it with a commercial euipment BPM403A(USA).

• 한국항행학회논문지
• /
• 제10권3호
• /
• pp.268-275
• /
• 2006

가정과 사무실 정보 응용 및 서비스의 급격한 확산은 광대역 근거리 멀티미디어 통신을 가능하게 하는 새로운 무선 기술을 필요로 하고 있다. 고품질 미디어와 고속의 무선 연결을 위한 요구에 의하여 IEEE 표준화 그룹은 WPAN을 위한 고속 물리 계층을 고려하고 있다. 협대역의 펄스 전송을 기반으로 하는 UWB 다중 접속 기술은 고속의 서비스 제공, 낮은 전력 소모, 정확한 측위를 제공할 수 있는 응용 중의 하나이다. 본 논문에서는 전력 제어된 UWB 디바이스로 구성된 무선 센서 네트워크에서 페이딩 환경에 대한 UWB의 BER 성능을 평가하기 위한 방법론을 제시한다. 얻어진 결과는 주어진 네트워크 구조에 따른 성능 분석을 위하여 사용될 수 있으며 UWB 홈 센서 네트워크를 위한 유용한 디자인 아이디어를 제공할 수 있다.

• Journal of Korean Neurosurgical Society
• /
• 제38권1호
• /
• pp.23-27
• /
• 2005

Objective : The aim of this study is to assess the significance of an apparent diffusion coefficient[ADC] study for diagnosis of ventriculitis. Methods : Seven patients with ventriculitis were enrolled in this study. Diffusion-weighted[DW] magnetic resonance images[MRI] and ADC maps in the dependent intraventricular collection, periventricular white matter and non-dependent cerebrospinal fluid[CSF] were obtained. The images and ADC data from the different lesions were compared. Results : The DW MRI showed marked hyperintensity in the purulent pus lesion, and the corresponding ADC maps revealed prominent hypointensity and restricted ADC values compared with the non-dependent CSF and normal white matter. Conclusion : The decreased ADC value and increased signal intensity of the dependent intraventricular fluid on the DW MRI show restricted water diffusion in the purulent fluid, which is indicative of a pyogenic ventriculitis diagnosis.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권3호
• /
• pp.186-191
• /
• 2015

Hand gesture is the most common tool used to interact with and control various electronic devices. In this paper, we propose a novel hand gesture recognition method using fuzzy logic based classification with a new type of sensor array. In some cases, feature patterns of hand gesture signals cannot be uniquely distinguished and recognized when people perform the same gesture in different ways. Moreover, differences in the hand shape and skeletal articulation of the arm influence to the process. Manifold features were extracted, and efficient features, which make gestures distinguishable, were selected. However, there exist similar feature patterns across different hand gestures, and fuzzy logic is applied to classify them. Fuzzy rules are defined based on the many feature patterns of the input signal. An adaptive neural fuzzy inference system was used to generate fuzzy rules automatically for classifying hand gestures using low number of feature patterns as input. In addition, emotion expression was conducted after the hand gesture recognition for resultant human-robot interaction. Our proposed method was tested with many hand gesture datasets and validated with different evaluation metrics. Experimental results show that our method detects more hand gestures as compared to the other existing methods with robust hand gesture recognition and corresponding emotion expressions, in real time.

• Smart Structures and Systems
• /
• 제25권3호
• /
• pp.265-277
• /
• 2020

Recently, the concept of "drive-by" bridge monitoring system using indirect measurements from a passing vehicle to extract key parameters of a bridge has been rapidly developed. As one of the most key parameters of a bridge, the natural frequency has been successfully extracted theoretically and in practice using indirect measurements. The frequency of bridge is generally calculated applying Fast Fourier Transform (FFT) directly. However, it has been demonstrated that with the increase in vehicle velocity, the estimated frequency resolution of FFT will be very low causing a great extracted error. Moreover, because of the low frequency resolution, it is hard to detect the frequency drop caused by any damages or degradation of the bridge structural integrity. This paper will introduce a new technique of bridge frequency extraction based on Hilbert Transform (HT) that is not restricted to frequency resolution and can, therefore, improve identification accuracy. In this paper, deriving from the vehicle response, the closed-form solution associated with bridge frequency removing the effect of vehicle velocity is discussed in the analytical study. Then a numerical Vehicle-Bridge Interaction (VBI) model with a quarter car model is adopted to demonstrate the proposed approach. Finally, factors that affect the proposed approach are studied, including vehicle velocity, signal noise, and road roughness profile.

• 한국정보통신학회논문지
• /
• 제12권6호
• /
• pp.990-998
• /
• 2008

본 논문은 SSB(Single Side Band) 변조 기법을 이용하여 실제 해상에서 실험을 수행한 결과를 분석하였다. 현재 수중 통신 분야에서의 연구는 디지털 변조 기법 및 OFDM이나 MIMO 시스템을 적용하고 있으나, 실제 해상에서 사용되는 상용 통신기로는 아날로그 변조 방식을 많이 사용하고 있다. 그에 따라 본 연구에서는 한국 해양 특성에 맞는 고품질의 수중 통신기기 개발을 목적으로 실험을 수행하였다. 실험은 SSB 아날로그 변조 기법으로 경상남도 진해 연안 천해의 조건에서 수행되었으며, 데이터는 수중 채널 특성 파악을 위한 토널 신호와 LFM 신호 및 실제 음성 통신을 위해 한국인 여성의 음성을 사용하였다.