• 대한임베디드공학회논문지
• /
• 제5권2호
• /
• pp.93-102
• /
• 2010

The FMCW(Frequency Modulation Continuous Wave) radar possesses range-velocity ambiguity to identify the correct combination of beat frequencies for each target in the multi-target situation. It can lead to ghost targets and missing targets, and it can reduce the detection probability. In this pap er, we propose an effective identification algorithm for the correct pairs of beat frequencies and the signal processing hardware architecture to effectively support the algorithm. First, using the correlation of the detected up- and down-beat frequencies and Doppler frequencies, the possible combinations are determined. Then, final pairing algorithm is completed with the power spectrum density of the correlated up- and down-beat frequencies. The proposed hardware processor has the basic architecture consisting of beat-frequency registers, pairing table memory, and decision unit. This method will be useful to improve the radar detection probability and reduce the false alarm rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권12호
• /
• pp.5249-5267
• /
• 2016

Cognitive radio is an efficient technique to improve spectrum efficiency and relieve the pressure of spectrum resources. In this paper, we investigate the spectrum sensing period in cooperative relay cognitive radio networks; analyze the relationship between the available capacity and the signal-to-noise ratio of the received signal of second users, the target probability of detection and the active probability of primary users. Finally, we derive the closed form expression of the optimal spectrum sensing period in terms of maximum throughput. We simulate the probability of false alarm and available capacity of cognitive radio networks and compare optimal spectrum sensing period scheme with fixed sensing period one in these performance. Simulation results show that the optimal sensing period makes the cognitive networks achieve the higher throughput and better spectrum sensing performance than the fixed sensing period does. Cooperative relay cognitive radio networks with optimal spectrum sensing period can achieve the high capacity and steady probability of false alarm in different target probability of detection. It provides a valuable reference for choosing the optimal spectrum sensing period in cooperative relay cognitive radio networks.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권1호
• /
• pp.13-18
• /
• 2019

This paper analyzes the signal acquisition performance of the legacy GNSS spreading codes and a polyphase code. The code length and chip rate of a polyphase code are assumed to be same as those of the GPS L1 C/A and Galileo E1C codes. The autocorrelation and cross correlation characteristics are analyzed. In addition, a way to calculate a more accurate probability of false alarm for a code with sidelobe non-zero auto-correlation function is proposed. Finally, we estimate the probability of detection and the mean acquisition time for a given signal strength and the probability of false alarm.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권4호
• /
• pp.173-180
• /
• 2015

In this study, an algorithm that detects a spoofing signal for a GPS L1 signal was proposed, and the performance was verified through RF spoofing signal simulation. The proposed algorithm determines the reception of a spoofing signal by detecting a correlation distortion of GPS L1 C/A code caused by the spoofing signal. To detect the correlation distortion, a detection criterion of a spoofing signal was derived from the relationship among the Early, Prompt, and Late tap correlation values of a receiver correlator; and a detection threshold was calculated from the false alarm probability of spoofing signal detection. In this study, an RF spoofing environment was built using the GSS 8000 simulator (Spirent). For the RF spoofing signal generated from the simulator, the RF spoofing environment was verified using the commercial receiver DL-V3 (Novatel Inc.). To verify the performance of the proposed algorithm, the RF signal was stored as IF band data using a USRP signal collector (NI) so that the data could be processed by a CNU software receiver (software defined radio). For the performance of the proposed algorithm, results were obtained using the correlation value of the software receiver, and the performance was verified through the detection of a spoofing signal and the detection time of a spoofing signal.

• 한국전자파학회논문지
• /
• 제23권5호
• /
• pp.632-639
• /
• 2012

Ad-hoc 네트워크는 음영 지역, 재난 지역, 전쟁 시와 같은 통신 인프라가 구축되기 어려운 상황에서 유용하게 사용될 수 있다. 그러나 음성 및 데이터 서비스 등과 같은 무선 서비스의 제공을 위해 많은 양의 네트워크 용량이 필요하게 되지만, 기존의 제한된 주파수 자원에 따른 주파수 부족 상황 및 주파수 자원 정책의 규제에 따라 원활한 주파수 사용이 어려운 상황이다. 이에 따라 높은 주파수 활용을 제공하는 인지 무선 시스템을 ad-hoc 네트워크에 적용하여 보다 다양하고 확장된 네트워크 서비스를 제공할 수 있다. 하지만 기존 스펙트럼 센싱에 있어 임계치가 정적으로 작용하므로 detection probability가 낮게 검출되는 단점이 있다. 이러한 점을 보완하여 신호들의 detection probability를 향상시키기 위해 adaptive threshold를 이용할 것이다. 본 논문에서는 동적인 임계치를 이용하여 수신 신호의 power에 따라 임계치가 변화하여 신호들의 detection probability를 향상시키는 센싱 성능을 보여 준다.

• 대한전자공학회논문지SP
• /
• 제49권1호
• /
• pp.97-103
• /
• 2012

본 논문에서는 잡음환경에서 효과적인 음성을 검출하기 위한 새로운 음성 검출 (VAD, voice activity detection) 알고리즘을 제안한다. 통계적 모델에 기반의 Likelihood ratio (LR)를 통하여 도출되는 전역 음성부재확률 (GSAP, global speech absence probability)은 음성검출을 위한 피쳐 (feature) 파라미터로 널리 적용되고 있다. 하지만 신호 대 잡음 비 (SNR, signal-to-noise ratio)가 낮은 잡음환경에서는 정확한 GSAP 추정이 어려운 문제점을 가지고 있다. 따라서 제안된 방법에서는 잡음환경에서 강인한 VAD 알고리즘을 위하여 Teager energy (TE) 기반의 GSAP를 피쳐 파라미터로 적용한다. 제안된 알고리즘은 기존의 방법과 객관적인 실험을 통해 비교 평가한 결과 다양한 배경잡음 환경에서 향상된 성능을 보였다.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.977-983
• /
• 2014

A repeat-back jamming signal is an intentionally re-broadcasted GNSS (Global Navigation Satellite System) interference. In this paper, a novel repeat-back jamming detection scheme is proposed. The proposed scheme uses a combined pseudo random noise signal (C-PRN) and is available for a generic GNSS receiver with a single antenna. The C-PRN signal is made by combining several received pseudo random noise signals that had been transmitted from the visible GNSS satellites. Through a Monte-Carlo simulation, the detection probability of a repeat-back jamming signal detected with the proposed scheme is presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.228-229
• /
• 2008

This paper presents stochastic methodology based fault diction and diagnosis algorithm for induction motor systems. First, we construct probability distribution model from healthy motors and then probability distribution for faulty motors is recursively calculated by means of the proposed probability estimation. We measure motor current with hall sensors as system state. The estimated probability is compared to the model to generate a residue signal which is utilized for fault detection and diagnosis, that is, where a fault is occurred. We carry out real-time induction motor experiment to evaluate efficiency and reliability of the proposed approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.171-173
• /
• 2008

This paper presents stochastic methodology based fault diction and diagnosis algorithm for induction motor systems. First, we construct probability distribution model from healthy motors and then probability distribution for faulty motors is recursively calculated by means of the proposed probability estimation. We measure motor current with hall sensors as system state. The estimated probability is compared to the model to generate a residue signal which is utilized for fault detection and diagnosis, that is, where a fault is occurred. We carry out real-time induction motor experiment to evaluate efficiency and reliability of the proposed approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1503-1504
• /
• 2008

This paper presents stochastic methodology based fault diction and diagnosis algorithm for induction motor systems. First, we construct probability distribution model from healthy motors and then probability distribution for faulty motors is recursively calculated by means of the proposed probability estimation. We measure motor current with hall sensors as system state. The estimated probability is compared to the model to generate a residue signal which is utilized for fault detection and diagnosis, that is, where a fault is occurred. We carry out real-time induction motor experiment to evaluate efficiency and reliability of the proposed approach.