• BMB Reports
• /
• v.51 no.11
• /
• pp.547-548
• /
• 2018

Phloem network integrates cellular energy status into post-embryonic growth, and development by tight regulation of carbon allocation. Phloem development involves complicated coordination of cell fate determination, cell division, and terminal differentiation into sieve elements (SEs), functional conduit. All of these processes must be tightly coordinated, for optimization of systemic connection between source supplies and sink demands throughout plant life cycle, that has substantial impact on crop productivity. Despite its pivotal role, surprisingly, regulatory mechanisms underlying phloem development have just begun to be explored, and we recently identified a novel translational regulatory network involving RNA G-quadruplex and a zinc-finger protein, JULGI, for phloem development. From this perspective, we further discuss the role of RNA G-quadruplex on post-transcriptional control of phloem regulators, as a potential interface integrating spatial information for asymmetric cell division, and phloem development.

• Parasites, Hosts and Diseases
• /
• v.27 no.4
• /
• pp.249-252
• /
• 1989

Fibricola cratera is a strigeoid trematode indigenous to North America that, heretofore, was known only to infect wild mammals. Herein, it is reported that an experimental inoculation of a human volunteer produced a patellt infection that lasted 40 months. Symptoms of epigastric discomfort, loose stools and flatulence occurred over the first year of infection and ameliorated thereafter. Eggs per gram of stool were low (${\leq}2$) throughout the course of infection and were not detected by the standard technique of formalin-ether concentration. To monitor infection, the entire stool sample was examined each month after sieving through No. 10 (pore size 2 mm) and 100 (pore size $145{\;}{\mu\textrm{m}}$) sieves and collecting eggs on a No. 325 (pore size $45{\;}{\mu\textrm{m}}$) sieve. This is the first report of a North American strigeoid trematode capable of maturing in a human and is only the second species of strigeoid known to do so. The other species is F. seoulensis which has been implicated in 26 human infections in Korea.

• Journal of Plant Biology
• /
• v.39 no.2
• /
• pp.99-105
• /
• 1996

Immunocytochemistry utilizes the specificity of the antigen-antibody reaction to localize specific antigens in cells or cellular organelles. Here we report the use of monoclonal antibodies, in conjunction with gold-labeled second antibodies to study the ultrastructural localization and tissue distribution of the Mr 98, 000 anionic peroxidase and other wall antigens. The antibody specific for this wall peroxidase, mWP3, labeled mainly the cell wall area. At the tissue level, the Mr 98, 000 peroxidase is located predominantly in the leaf mesophyll, internal coleoptile and sieve elements, but not in the root, as assayed with these procedures. The coleoptile walls were less heavily stained than the walls of leaf mesophyll cells. At the subcellular level, it is localized mainly in intercellular regions of the cell walls. A similar staining pattern was revealed by mWP19, one of anti-$\beta$ glucosidase antibody, though it looked less heavily stained than one with mWP3. In order to serve as a control wall staining using IgM monoclonal antibodies, mWP18 was used. Most of the label is localized over wall regions of cells of the young leaf mesophyll and coleoptile.

• Journal of the Korean Society of Tobacco Science
• /
• v.10 no.1
• /
• pp.65-73
• /
• 1988

The fragilities of the tobacco has been considered to be one of the most Important factor in determing not only the quality of the tobacco but also the economic effect to cigarettes manufacturing. The three blender methods to determine relative fragilities were compared with the Korea Tabacco & Ginseng Research Institute Standared Fragilities Test in order to established a suitable method for measuring the fragilities of Korea tobacco leaves. Fragilities measurement by the blender methods expressed either sieve aperture or fineness index and a statistical comparison of the three blender methods was made to short the mirror variance, standard deviation, coefficient of variation, slope, correlation, sensitivity index, etc.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.3 s.76
• /
• pp.26-32
• /
• 2007

A series of large-scale experiments were carried out in order to examine wave-induced liquefaction in a loosely packed sandbed, its afterward high densification and liquefaction by oscillatory pore pressure. The experiments were conducted in a Large Hydro-Geo Flume that can nearly solve the problems of scale effects of the sandbed, and the 50% sieve diameter of sand was 0.2 mm. The generation of residual pore pressure and its afterward high densification which had observed by Takahashi et al. (1999) in a wave flume experiment using fine sand with the size of 0.08 mm. As a result, the relative density of the sandbed after high densification was increased up to 79% and liquefaction by oscillatory pore pressure was not observed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.2
• /
• pp.132-139
• /
• 2001

This study deals with coal-mine waste (CMW) for use in concrete as a replacement of normal aggregates. The CMW was collected from Sabuk region. Ganwon-do. Fine and coarse aggregates from CMW were prepared by using a crusher and separating debris with #4 sieve. CMW aggregates showed good physical and mechanical properties with having specific gravity over 2.65, absorption less than 1%, and abrasion ratio below 20%. However, particle shape of CMW was poor because of non-isotropic nature of matrix which cause particles to be long or flat. Since irregular particles caused a poor workability, to make workability better, a 1/4 of coarse aggregate was replaced with normal aggregate together with a superplasticizer. Compressive strength and other mechanical properties of CMW concrete were very good. Color of the concrete was darker than normal concrete due to black color of CMW. In conclusion, characteristics of CMW concrete was acceptable for use as a structural concrete material.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.676-685
• /
• 1993

A mathematical model was developed to quantify the separation process of threshed grain-straw mixtures. It was made to predict the separation loss from a separation unit consisted of stationary crimped sieve with rotating inner rotor. Experiments were performed to prove the mathematical model by changing various levels of pertinent variables for rice. Good Agreement between the simulated results and observed data under the various test conditions, such as inclination angle of the separator, vane pitch, rotor speed, MOG/G ratio, feed rate, and crop variety and moisture content, were confirmed.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.431-435
• /
• 2012

Aluminum containing mesoporous molecular sieves Al-SBA-1 ($n_{Si}/n_{Al}$= 2, 5, 10, 15) was synthesized with a one-step method, and the catalyst was characterized with powder X-ray diffraction (XRD), nitrogen adsorption-desorption, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Finally, we studied the catalytic activities of Al-SBA-1 molecular sieves in Pechmann reaction of 3-methoxyphenol and Ethyl acetoacetate to get 7-methoxy-4-methyl coumarin. Four parameters reaction temperature, time, catalyst weight and reactants ratio were optimized.

• Journal of Korea Foundry Society
• /
• v.1 no.3
• /
• pp.19-29
• /
• 1981

An emphasis has been placed on the importance of selecting a sand for furan sand process, which ie affected by the properties of sand. Investigations have been carried out to use the domestic artificial sands for the furan sand process. For laboratory investigations, the sands have been prepared and tested for chemical analysis, loss on ignition, sieve analysis, AFS grain fineness number, grain shape, PH value, acid demand, surface shape, theoretical surface area, moisture absorption, crushing durability and compressive strength and S. S. I. of molding sands. Most commercial sands have been found to be able to be used. The main requirement of the sands has been shown to be that 3 or 4 screen sands, AFS no.40-70 (or 100), of low acid demand, good surface area and good grain shape require less resin and catalyst to give an adequate strength.

• Journal of Plant Biology
• /
• v.34 no.3
• /
• pp.191-199
• /
• 1991

This study has been conducted to investigate the developmental changes of cambial initials and their derivatives in relation to the growing girth of tree in Diosypros kaki and Firmiana simplex. In D. Kaki and F. simplex with typical storeyed cambium, increase in the girth of camium occurred by radial anticlinal division in general, however occasionally the increase was companied by pseudotransverse division. The length of fusiform initials, vessel member, and sieve tube member remained relatively constant throughout the secondary growth but that of fiber showed general tendancy to increase with growing girth of tree. During the girth increase of tree, height and number of ray remained constant in D. kaki, however in F. simplex, height of ray markedly decreased while the number of ray per unit area more or less increased. The secondary ray was originated from the segmentation or division of the side or end of fusiform initials.