• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.53-56
• /
• 2010

항공용 Multi-looking 카메라는 1대의 사진기 몸체에 5대의 카메라를 설치하여 동시에 1장의 연직사진과 4개의 경사사진을 획득하므로, 연직방향으로 촬영된 일반 항공사진에 비해 현장에 대한 다양한 정보를 제공한다. 그러나 3차원 공간정보 구축시 다각사진촬영시스템은 대형CCD를 사용하는것이 아니라 중형CCD를 사용하므로, 주요대상물의 전후좌우 영상을 취득하려면, 촬영시 중복도 설정을 고려하여야 하며, 특히 Sideward-looking 카메라의 경우 횡중복도 설정에 의해 특정대상물 촬영 여부를 확인할 수 있다. 이에 본 연구에서는 촬영시 횡중복도 변화에 의한 다각사진의 Sideward Footprint 및 촬영의 효율성에 대하여 분석하였다.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.164-169
• /
• 1998

버(burr)는 절삭공정중 공작물의 표면상의 피드마크 뿐만 아니라 측면에도 발생할 수 있다. 이는 공작물의 정밀도와 작업자의 안전의 측면에서 바람직하지 않다. 본 연구에서는 3차원 절삭에서 발생하는 측면버에 관한 실험적 연구를 수행한다. 특히, 측면버의 크기와 절삭 파라메터 사이의 실험적 관계가 설정되며, 이를 통하여 버의 크기를 최소화할 수 있는 방법이 제안된다.

• 한국자원식물학회지
• /
• 제12권2호
• /
• pp.139-144
• /
• 1999

광조사 방향 및 광도에 따른 몇 가지 배양식물체의 생장반응을 조사하였다. 광조사 방향은 배양실내 조명장치를 상방향 또는 측방에 설치하여 조사하였다. 딸기 배양식물체의 초장과 근장은 광조사 방향에 관계없이 차이가 없었으나, 엽면적, 생체중 및 건물중은 광도가 높을 수록 증가하였다. 감자 절간 배양에서도 광도가 높은 측방광 조사구에서 초장이나 근장은 감소하였으나, 줄기 및 뿌리는 굵기가 굵고 생체중과 건물중 그리고 엽면적도 증가하였다. 백합인편배양 역시 측방광 고광도 조사구에서 자구 형성이 많았고 생체중과 건물중 모두 증가하였다. 따라서 관행 하방광 조사보다 배양용기의 측면에서 광을 조사하여 광도를 높이고, 배양용기를 3단으로 적재할 수 있는 측방광 조사방법이 배양식물체의 생장을 촉진시켜 양질 배양묘 생산효율을 증대시켰다.

• 대한치과교정학회지
• /
• 제15권2호
• /
• pp.211-227
• /
• 1985

The purpose of this study was to analyze the stress distribution and the displacement in the maxillary complex after the application of the three kinds of the head gear. (high pull head gear, straight pull head gear, cervical pull head gear.) Orthopedic force, 300 gram, was applied to the maxilla of the dry human skull in a high, straight and cervical direction. The stress distribution and the displacement within the maxillary complex was analyzed by a 3-dimensional finite element method. The results were as follow: 1. In won, the stress of conical pull head gear was the greatest stress and straight pull head gear was the medium stress and high pull head gear was the least stress. 2. The compressive stress was observed on the anterior portion of premaxilla, especially anterior nasal spine area, when the three kinds of head gear were applied to the dry kuman skull. 3. It appeared that the stress of the anterior portion of the zygomatic bone was greater than the posterior portion in the case of three kinds of head gear application and compressive stress was noted only at the below of the frontozygomatic suture of the zygomatic bone. 4. The backward, upward, sideward displacement of the alveolar area was observed in a high pull head gear application but in the case of straight pull head gear and cervical pull head gear application, the backward, downward, sideward displacement was observed. 5. The forward, downward, sideward displacement was observed on the midpalatine suture and premaxilla on the sagittal plane and transverse palatine suture in the case of three kinds of headgear application.

• 한국언어정보학회지:언어와정보
• /
• 제13권1호
• /
• pp.127-143
• /
• 2009

Tough-construction is, undoubtedly, one of the most puzzling syntactic problems in the history of transformational grammar. Various approaches have been proposed including Deletion approaches (Akmajian, 1972; Lasnik and Fiengo, 1974) and movement approaches. Among the movement approaches, Chomsky (1977; 1981) argues for movement of null Operator, and Hornstein (2001) argues for a two-step movement equipped with Sideward movement. Most recently, Schueler (2004) and Hartman (2009) each have also argued for a kind of movement approach. With the development of the Minimalist syntax (Chomsky, 1995; Chomsky, 2000; Chomsky, 2001), tough-construction, an age old problem in the description of grammar, turns into another round toward to a more satisfactory answer. By examining the most recent competing analyses of tough-constructions, this paper defends and extends Schueler's (2004) analysis, rather than Hartman's (2009) two step movement approach. Furthermore, this paper proposes that tough-subject originates from the intermediate CP internal Spec-TopicP position rather than from the iterated CP layer (Authier, 1992). This approach has more descriptive power than it was originally argued for in Schueler (2004) and is a step closer toward Minimalism insofar as the conception of government is no longer utilized.

• 한국산업융합학회 논문집
• /
• 제3권3호
• /
• pp.245-250
• /
• 2000

This study was carried out to investigate blowing performance for blowing type in space heater. This paper present that power requirement, static pressure, total pressure and static pressure efficiency were increased in proportion to air flow rate. And in the Korean space heater, side ward blowing type was effected than downward blowing type.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.9-19
• /
• 2005

The purpose of this study was to analyze the effects of three different types of preparatory movement(squat, countermovement and hopping) in sideward responsive propulsion movement. 7 healthy subjects performed left and right side movement task by external output signal. 3D kinematics were analyzed The results were followed First, performance time in the countermovement and hopping conditions was shorter(10-20%) than that in the squat condition. The hopping condition that is more related to pre-stretch showed excellent performance. Second, time difference between after turned on the external signal and until take off was the primary factor in performance results among movement conditions. The preparatory phase before the propulsive phase in the squat condition produced more time than that in other conditions. The hopping condition showed the most short time in both the preparatory and the propulsive phase, therefore it was advantage for performance result Third, significant difference was not found in take-off velocity among movement conditions although there was difference of the time required in the propulsive phase. The maximum acceleration in the propulsive phase was larger in order of the hopping. countermovement, and squat condition. The countermovement and hopping conditions showed high take-off velocity although the propulsive phase in those conditions was shorter than that in squat condition. The pre-stretch by preparatory countermovement was considered as the positive factor of producing power in concentric contraction. Fourth, the hopping condition produced large angular velocity of joints. In hopping condition, large amount of moment for rotation movement was revealed in relatively short time and it was considered to cause powerful joint movements. In conclusion, the hopping movement using countermovement is advantage of responsive propulsion movement. It is resulted from short duration until take off and large amount of joint moment and joint power in concentric contraction by pre-stretch.

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.373-380
• /
• 2010

The purpose of this study was to evaluate the effect of balance training on gait stability. The study population included 17 male high school students who were divided into 3 groups, each of which underwent one of the following types of balance-training programs for 8 weeks: 1 foot standing on cushion foam, trunk muscle training, and inverted body position training. 0, 4, and 8 weeks, the following experiment was performed: The participants were asked to close their eyes and take 17 steps; the stability of forward and sideward movement was determined, and the direction linearity was measured. The results revealed that all the training programs caused a decrease in stride deviation and an increase in the and the stride length, thereby improving the stability of forward movement. All the programs decreased the variation in step width and were thus also effective in improving the stability of sideward movement. The inverted body position training program was considered very effective because the cross point appeared on post hoc graphic analysis after 4 weeks, and the deviation length for 10 m was low, i.e., below 4 cm. All the programs were effective with respect to direction linearity because they decreased the deviation in direction widths. The results indicate that whole-body neurocontrol training is more effective than simple muscle training and local focused balance training, although this neurocontrol training-in the form of inverted body position training-required a longer training period than did the other programs.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.78-85
• /
• 2002

This paper deals with the finite element model of the monitor for the simulation of directional free drop tests such as backward, sideward, edge and vertex drop. The model was made for an unconditional stable solution for the explicit integration algorithm. The general behaviors at the time of impact were found to well correlate with the actual situation in terms of acceleration, displacement, contact force and stress of monitor components even though the experiment of the associated drop is performed for the validity of the model.

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.187-196
• /
• 2007

The purpose of this study was to find the most effective movement pattern from three different types of preparatory movement(squat, countermovement and hopping) in sideward responsive propulsion task, which had the time constraint to complete the performance. 7 healthy subjects participated in left and right side movement task by an external signal, which required the subject to perform the task as fast as possible. Mechanical output and joint kinetics focusing on the lower extremities were analyzed. The results were as follows. In spite of the shortest duration in propulsive phase, the hopping condition showed no difference with other conditions in the work output done and take-off velocity. It resulted from the greatest power output generated during the propulsive phase. A significant difference was found for joint moment and joint power according to the movement conditions. The joint moment and joint power for the countermovement and hopping conditions were larger than those in the squat condition. This was speculated to be due to the extra power that could be generated by the pre-stretch of muscle in preparation for the propulsion. The hopping condition which had substantially more pre-stretch load in the preparatory eccentric phase produced considerably more power than countermovement condition in the propulsive concentric phase. Furthermore during the hopping a large amount of joint moment and joint power could be produced in a shorter time. Therefore it was deemed that the hopping movement is an effective type of preparatory movement which takes much more advantage of the pre-stretch than any other movement.