• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.797-803
• /
• 2010

A vehicle door impact beam made of a thin sheet of steel has been constructed using hot stamping technology with the aim of ensuring occupant safety in the event of a side collision. This technology has been used to increase the strength of the vehicle body parts and to reduce the weight of the door impact beam as well as the number of work processes. Mechanical tests were performed to determine the material properties of the hot-stamped specimen and the results of the tests were used as input data in stamping and structural simulation in order to obtain the optimal design of door impact beam. The strength of the hot-stamped door impact beam increased to a value that was 102% higher than that of conventional pipe-shaped door impact beam. A weight reduction of 34% was also achieved.

• Transactions of Materials Processing
• /
• v.13 no.2
• /
• pp.115-121
• /
• 2004

Hemming is the last farming process in stamping and determines external quality of automotive outer panels. Few numerical approaches using 3-dimensional finite element model have been applied to a hemming process due to small element size which is needed to express the bending behavior of the sheet around small die comer and comparatively big model size of automotive opening parts, such as side door, back door and trunk lid etc In this study, part model assembling method is suggested and applied to the 3-dimensional finite element simulation of flanging and hemming process far an automotive front hood.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.103-107
• /
• 2002

The 2nd forming process of flanging/hemming has recently many interest because it determines external quality of automobile. It is difficult to apply finite element simulation in flanging/hemming due to small element size which needs for expression of bending effect on the die corner and big model size of side door, back door, tank lid and like opening Parts. This paper shows the process of flanging/hemming simulation using finite element model for automotive panels. The explicit finite element program PAM-STAMP$\^$TM/ was used to simulate the flanging and hemming operations.

• Journal of architectural history
• /
• v.10 no.4 s.28
• /
• pp.7-21
• /
• 2001

This study is to analyze site layout traditional government office building focused on Chonui-hyon(全義縣) in Chungchong province with Chungchong-do regional maps(忠淸道地方地圖) and Eupjis(邑誌, topography) being compiled in the late Chosun dynasty. The conclusion of analysis can be summarized as follows; 1. Chonui-hyon(全義縣) in Chosun dynasty is gone with a planning principle of the capital city(Han-Seong, 漢城) with disposing Sa-Ji-Dan(社稷壇) and Gaek-Sa(客舍), which are placed to the left and right of Eupchi(邑治), and it is followed in the wake of the spatial structure of Chosun dynasty palace with disposing Dong-Heon(東軒) in front, Nae-A(內衙) at the back of it, or from side to side, also by the Dong-Heon of the center, with organizing each facility around it. 2. Dong-Heon and Gaek-Sa of Chonui-hyon is passed through three step gate, Mun-Ru(門樓), Woi-Sammun(外三門), Nae-Sammun(內三門), from Hong-Salmon(紅門), and are shown hierarchy by haying been placed at the end of approach axis. 3. Dong-Heon can be disposed by Feng-Shui(風水) which have influence on the southeast direction with Jin-San(鎭山) and An-Dae(案對), on the other hand, Gaek-Sa can be disposed by symbolic of the authority of a king. 4. Site layout by function of provincial government office is provided into four ferrite, Dong-Heon, Gaek-Sa, Nae-A, practical business territory, and eve territory is organized by official institution on a social position to radiation, by the compositive axis to be made Woi-Sammun Nae-Sammun Dong-Heon Nae-A 5. Approach process of Chnui-hyon government office is three door system similar to Kam-Young(監營) in a different way two door system in most provincial government office, also approach axis is formed by bending.