• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.53-57
• /
• 1998

In order to investigate the effects of the variables during the stamping process upon the side wall curl behavior, experiments and finite element analyses were done using a 90 degree draw-bending test. The variables considered were the die radius, the forming speed, the restraint force, the lubrication and the sheet grade. The experiments and simulation conditions were selected according to the design of experiment (DOE) approach. The effects of the restraint force, the lubrication and the forming speed were the same for both high strength and mild steels, but the effects of the die radius on the side wall curl were dependent on the magnitude of the die radius and the sheet grade. A straight side wall was observed for both high strength and mild steels when the die radius was about 2∼3 times of the sheet thickness. It was recommended that the restraint force, the forming speed and the friction be increased in order to reduce the side wall curl.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.125-131
• /
• 2003

The U-draw bending operation is known as a representative test method for springback evaluation of sheet metals since the sheet in U-draw bending operation undergoes stretching, bending and unbending deformations occurred at read stamping process. In this study, a simplified approach was proposed for predicting springback and side-wall curls in U-draw bending operations, using moment-curvature relationships derived for sheets undergoing stretching, bending and unbending deformation.

• 소성∙가공
• /
• 제13권8호
• /
• pp.678-688
• /
• 2004

The U-draw bending operation is known as a representative test method for springback evaluation of sheet metals since the sheet in U-draw bending operation undergoes stretching, bending and unbending deformations occurred at the stamping process. In this study, a simplified approach was proposed for predicting springback and side-wall curls of tailor-welded blank in U-draw bending operations, using moment-curvature relationships derived for sheets undergoing stretching, bending and unbending deformation. Two different welded strips were adopted to compare the effects of weld-line locations on the springback. One (type A) was welded along the centerline of the strip-width and the other (type B) was welded along the centerline of the strip-length. To investigate the effect of different thickness combination on the springback, the tailor-welded strips were joined by the laser welding process and consisted of three types of thickness combinations of sheets, SCP1 0.8t ＊ SCP1 1.2t, SCP1 0.8t ＊ SCP1 1.6t and SCP1 0.8t ＊ TRIP 1.0t. Some calculated results by the simplified formula were compared with experimental results.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.117-125
• /
• 2013

Variations of springback in stamped parts are induced by the uncontrollable noises including the variation of incoming material properties, lubrication and other forming process parameters. Reduction of springback variation is very important during springback compensation processes on stamping dies and assembly processes. To reduce the variation of springback, a robust optimization methodology which uses complex method combined with orthogonal array is proposed. The proposed method is applied to the robust design of U-channel die for the reduction of side wall curl. It is shown that the drawbead and die radius of U-channel draw die can be effectively optimized by the proposed method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.465-468
• /
• 2008

In this paper, ABAQUS, one of the implicit finite element codes, is used to analyze the U-channel Draw benchmark problem of NUMISHEET 2005. Forming and springback stages have been done consecutively to compare their results with the experimental ones. The main measures for comparing are the side wall curl and angle. The result by numerical analysis are shown generally to be correspondent with the experimental results that the max. error is confined under about 10%.

• 한국해양학회지:바다
• /
• 제5권2호
• /
• pp.77-85
• /
• 2000

회전반 유체실험을 이용하여 국지적 외력에 의한 순환특성을 모의하는 방법을 고찰하였다. 기존의 실험들은 균일한 외력에 의한 순환특성을 고려하였으나 한국 동해를 고려할 때 바람응력 컬의 남북 방향으로의 분포특성 및 해수면 열 손실의 북부해역에서의 존재를 근거로 공간적인 국지성 및 계절 변화를 염두에 둔 주기성을 복합적으로 모의할 수 있는 방법과 실험을 실시하였다. 바람응력 컬의 국지성은 에크만 층내 압력 경도력을 발생시켜 내부에도 같은 압력 경도력이 전달되어 지형류가 발생되게 하였으며 해수면 냉각을 위해서는 용기의 측면을 국지적으로 냉각시켜 자유표면을 유지할 수 있는 방법을 제시하였다. 남북에 위치한 두 개의 서로 다른 방향을 갖는 폐쇄순환과 서안경계류의 크기 및 이안 위치 변화등을 냉각효과 첨부시 및 응력 컬의 주기성을 갖는 경우를 택하여 실험적으로 관찰하였다.