• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1369-1374
• /
• 2007

We carried out a vibration test to analyze causes of the damage in the plate of Bell Crank of the high speed Line turnout, at the section where the plate of high speed railway turnout get damaged from May 8th to 9th in 2006. In addition, through a test of the material quality, we performed an analysis of the qualities (of the components) composing the plate. The result indicates that the main cause of faults of the high speed line turnout, which is installed in the section of Chil-gok IEC, is the vibration. In this paper, effects on track-side equipments from vibration, and measurements to protect them from it are mainly analyzed and checked.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1023-1026
• /
• 2007

CBTC (Communication Based Train Control) is a railroad system, using wireless communication for data transmission between on-board units and ground units, that makes ground computer periodically collect position and speed data from each train and transmits the preceding train's distance data up to speed limit point so as to make on-board control unit control the optimum train speed. Due to the fact that wireless communication system for train control employs only limited frequency band and output frequency, a number of ground communication units should be installed at track-side; also a running train should carry out Handover function which maintains the communication by accessing a new communication channel of the adjacent on-board communication units in accordance with the output of received radio wave. Especially CBTC is largely dependent on Handoff function between ground communication units. Therefore, this paper provides the method of identification of hazard between ground communication units and on board units.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.603-608
• /
• 1998

In order to obtain basic data for the prediction of railway noise propagation, the noise radiation characteristics (source position, radiation directivity, etc) of trains were measured by using the sound intensity method. The measurements were performed at a side of railway by setting an intensity-probe array. As the measurement results, it was found that rolling noise due to interaction between wheel and rail and motor noise radiation from the lower part of train are dominant. The location of main sound sources can be described as being at the height of 0.1m in the center line of track, and the radiation directivity in the cross section of actually running trains are presented as a dipole source.

• Journal of Forest and Environmental Science
• /
• v.24 no.3
• /
• pp.171-174
• /
• 2008

The increasing price of liquefied petroleum gas (LPG) has forced many households to shift to firewood/charcoal in the Philippines, causing tremendous pressure on the dwindling forest. This transition is more obvious in the rural area where firewood price is almost half of that in the cities. Both problems on big demand for firewood and the pressure on our forest can be partly solved by going into firewood plantation. After all, the country has vast track of idle lands, both private and government lands, waiting to be developed. What the government can do are: a) aggressive promotion of firewood plantation, b) simplify further the old technology on establishing firewood plantation to encourage more farmers, c) improve charcoal processing and d) promote the use of efficient stoves. This write up discusses the need for firewood plantation, areas available for planting, where to plant in farms, what species to plant in a particular soil type/location for optimum growth, planting methods, harvesting, marketing, and the side lights on the ecological benefits derived from plantation aside from wood.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.676-682
• /
• 2009

The idler wheel installed at the front side of the newly developed tracked vehicle didn't meet the durability requirement by showing the crack failure near the jointed region at the wheel during the field test. To find the crack developing mechanism we constructed finite element model for the idler wheel representing the behavior of interface between each suspension units, material properties from the material test data and actual loading conditions. This paper shows a result that maximum von Mises stress near the bolt hole on the outer rim is higher than inner idler coressponding to the actual test result and that result was reversed by adopting the reinforcement outside of the outer rim.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.1
• /
• pp.28-34
• /
• 2013

For the senses of beauty and texture, internal components of small passenger cars are manufactured by texturing plastic with drawplate but those of deluxe passenger cars are manufactured by bonding pre-embossed skin to the surface of drawplate. As the pre-embossed skin is bonded at high temperature and pressure, the pattern of skin is distorted. The corner part is hardened and its dimension tolerance is changed by resulting in the increase with its defective rate. This study provides the method to design and manufacture the door trim track by vacuuming the non-patterned skin to upper-side drawplate which forms the pattern of descending skin. It is pressed to the plastic product with hot-press method and the damage of bossed-pattern is prevented. Valuation in this study has been done by analyzing, designing and experimenting method.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.77-83
• /
• 2009

The construction of concrete slab track system is increased because the system has advantages which are maintenance free and so on, the other side, the system has weak points such as increase of the cost of the early stage construction. Recently, railway environment is issued including noise. Therefore, measures which are to mitigate noise on slab tracks were introduced, however, it is found that efficiency of noise reduction is low because noise problem is still issued. In this study, to study noise characteristics on concrete tracks we measured noise by site types. Finally the results have done comparative analysis.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.29-50
• /
• 2002

Based on the investigation results on the damages of some underground structures due to the severe Kobe Earthquake it concludes that the aseismicity of underground is far superior to that of aboveground structures. Therefore, at first, necessity to reconstruct strong cities especially by good use of underground space will be discussed. Then two non-circular shield-tunneling projects in Japan are discussed. The first is construction of the world's first shield driven double track subway tunnel of rectangular shape for the Kyoto Municipal Subway. This paper presents a report on the overall planning, the tests that were performed in the process of planning, and the results of driving. The second is the design of the Hirakata Tunnel, with three traffic lanes and shoulders on one side, which will be constructed as one of the tunnels for The New Meishin (Nagoya-Kobe) Expressways. This paper presents the feasibility study of the shield tunneling method, using the same design criteria as the non-circular, horseshoe section of mountain tunnel, to the equivalent section of the Hirakata Tunnel.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.119-128
• /
• 1998

An electromagnets and a single-sided linear induction motor(SLIM) are used for suspension and propulsion equipment respectively. The electromagnets and SLIM are installed in the same frame, called a bogie, to reduce the volume under the vehicle floor and to raise the response charateristics to follow the track. Then the 3-dimensional forces(thrust force, normal force, side force) generated by SLIM direct]y affect the suspension system as the disturbance force. Moreover, in the running condition, the gap length variation in the electromagnets is the same as the SLIM. Therefore, the mutual interaction between the electromagnets and the SLIM is an important problem to realize the smaller gap length. In this paper, the dynamic interaction is analyzed and confir

• International Journal of Computer Science & Network Security
• /
• v.24 no.3
• /
• pp.43-52
• /
• 2024

Health Monitoring System is a sophisticating technology and another way to the normal/regular management of the health of the patient. This Health Monitoring Mobile Application is a contribution from our side to the public and to the overall health industry in Pakistan. With the help of Health mobile application, the users will be able to store their medical records, prescriptions and retrieve them later. The users can store and keep track of their vital readings (heart rate, blood pressure, fasting glucose, random glucose). The mobile application also shows hospitals that are nearby in case the user wants to avail of any medical help. An important feature of the application is the symptoms-based disease prediction, the user selects the symptoms which he has and then the application will name certain diseases that match those symptoms based on relevant algorithms. The major advances and issues have been discussed, and as well as potential tasks to health monitoring will be identified and evaluated.