• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.23-31
• /
• 2010

The increasing demands on low-power, and low-complexity video encoder have been motivating extensive research activities on distributed video coding (DVC) in which the encoder compresses frames without utilizing inter-frame statistical correlation. In DVC encoder, contrary to the conventional video encoder, an error control code compresses the video frames by representing the frames in the form of syndrome bits. In the meantime, the DVC decoder generates side information which is modeled as a noisy version of the original video frames, and a decoder of the error-control code corrects the errors in the side information with the syndrome bits. The noisy observation, i.e., the side information can be understood as the output of a virtual channel corresponding to the orignal video frames, and the conditional probability of the virtual channel model is assumed to follow a Laplacian distribution. Thus, performance improvement of DVC systems depends on performances of the error-control code and the optimal reconstruction step in the DVC decoder. In turn, the performances of two constituent blocks are directly related to a better estimation of the parameter of the correlation channel. In this paper, we propose an algorithm to estimate the parameter of the correlation channel and also a low-complexity version of the proposed algorithm. In particular, the proposed algorithm minimizes squared-error of the Laplacian probability distribution and the empirical observations. Finally, we show that the conventional algorithm can be improved by adopting a confidential window. The proposed algorithm results in PSNR gain up to 1.8 dB and 1.1 dB on Mother and Foreman video sequences, respectively.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.954-962
• /
• 1996

Four kind of polysilanes which had side chains of methyl, phenyl, and mixed structures, were synthesized and modified by doping with iodine. The structural, thermal, and electric characteristics of obtained polymers were systematically observed with iodine, The structural, thermal, and electric characteristics of obtained polymers were systematically observed with FT-IR, UV/VIS, TGA/DTG, DSC, and measurement of electric conductivity. From FT-IR spectra, it was confirmed that the synthesized polysilanes had side chains of methyl, phenyl, and mixed structures. The thermal stabilities of the polymers were found to increase with phenyl substituents. The polysilanes with phenyl side groups showed ${\sigma}-{\sigma}*$ transition absorption at wavelengths longer than 350 nm. The bathochromic shift of polysilanes with phenyl substituents relates probably to the narrowed band gap caused by delocalization of ${\pi}$-electron. The polymers doped with iodine showed multi-step pyrolysis behavior and higher residue compared with that of the undoped polymers. The electric conductivities of the undoped and doped polysilanes were $10^{-5}S/cm$ and $10^{-4}S/cm$, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.4
• /
• pp.333-340
• /
• 1990

The authors carried out a visiualizational model test by the hydrogen bubble method to examine the pattern of the fluid flow besides the simple camber type and plane type otter board in circulation water channel. The experimental conditions are velocity of flow 0.05 and 0.1m/sec, angle of attack 0$^{\circ}$~45$^{\circ}$(5$^{\circ}$step). The results obtained are as follows: 1. In the case of the simple camber type otter board located angle of attack 25$^{\circ}$, vortex at the leading edge was geneated at 1/2 of chord length. 2. Size of the vortex generated in the trailing edge was about 2~3 times larger then that of the leading edge. 3. In the case of the simple camber type otter board located angle of attack 30$^{\circ}$, separation of stream-line at leading edge was generated at 1/3 of chord length. 4. Nearest stream-line in the back side of the simple camber type otter board was bent in the direction of otter board when the angle of attack was 25$^{\circ}$ and 30$^{\circ}$, and in the case of plane type otter board was expanded outside of the flow direction. 6. Area separated of the simple camber type otter board at the angle of attack 30$^{\circ}$ was smaller then that of plane type otter board. 7. Flow speed in the back side of the simple camber type otter board was about 1.4 times faster then that in the front side, and in the case of the plane otter board about 1.2 times faster.

• Applied Biological Chemistry
• /
• v.4
• /
• pp.17-22
• /
• 1963

Changes of Enzymatic activities and chemical components during Koji preparation of soy sauce with various ratio of soy bean and wheat were studied as first step for checking the current ratio of raw materials for improved soy sauce and determination of proper ratio of them in the respect to its quality and taste, and following results could be obtained. 1. The Protease in the dryed Koji were mainly conmposed of a part which active at the neutral (about pH 6.0) range, while parts which active at acid and alkaline side were inferior. The more amount of wheat increases as raw materials of Koji, the stronger Protease activities of acid and neural side were, while the weaker alkaline side were. 2. Activity of Enzymes were increased rapidly in earlier stage then gradually in later stage or Protease and ${\beta}-Amylase$ rapidly throughout except drying of ${\beta}-Amylase$ during the course of Koji preparation. The more amount of wheat as raw material increases, the stronger Protease and ${\beta}-Amylase$ activity except. ${\beta}-Amylase$ were. 3. Reducing sugar, amino nitrogen, total nitrogen were increased, while total sugar were decreased during the course of Koji preparation. 4. The more amount of wheat increases as raw materials, the more increase reducing sugar, total sugar were, while the total nitrogen were decreased, no noticeable differences were observed in the amino nitrogen among the dryed Kojies.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.687-694
• /
• 2018

The problem of wheel tread defects has become a major challenge for the health management of high-speed rail as a wheel defect with small radius deviation may suffice to give rise to severe damage on both the train bogie components and the track structure when a train runs at high speeds. It is thus highly desirable to detect the defects soon after their occurrences and then conduct wheel turning for the defective wheelsets. Online wheel condition monitoring using wheel impact load detector (WILD) can be an effective solution, since it can assess the wheel condition and detect potential defects during train passage. This study aims to develop an FBG-based track-side wheel condition monitoring method for the detection of wheel tread defects. The track-side sensing system uses two FBG strain gauge arrays mounted on the rail foot, measuring the dynamic strains of the paired rails excited by passing wheelsets. Each FBG array has a length of about 3 m, slightly longer than the wheel circumference to ensure a full coverage for the detection of any potential defect on the tread. A defect detection algorithm is developed for using the online-monitored rail responses to identify the potential wheel tread defects. This algorithm consists of three steps: 1) strain data pre-processing by using a data smoothing technique to remove the trends; 2) diagnosis of novel responses by outlier analysis for the normalized data; and 3) local defect identification by a refined analysis on the novel responses extracted in Step 2. To verify the proposed method, a field test was conducted using a test train incorporating defective wheels. The train ran at different speeds on an instrumented track with the purpose of wheel condition monitoring. By using the proposed method to process the monitoring data, all the defects were identified and the results agreed well with those from the static inspection of the wheelsets in the depot. A comparison is also drawn for the detection accuracy under different running speeds of the test train, and the results show that the proposed method can achieve a satisfactory accuracy in wheel defect detection when the train runs at a speed higher than 30 kph. Some minor defects with a depth of 0.05 mm~0.06 mm are also successfully detected.

• Journal of Life Science
• /
• v.19 no.12
• /
• pp.1821-1828
• /
• 2009

The purpose of this research was to investigate how the plyometric training and weight training program, applied in the field for exercise performance of throwing players, influenced improvement of athletic abilities, including agility, maximum muscular power, and strength. After implementing plyometric training and weight training to 21 high school throwing players for 10 weeks, we designed the next step. The 21 subjects were divided into two groups - women's group and men's group. All subjects were tested to determine agility using sidestep, burpee test, reaction time, lower body power and strength using standing long jump, standing jump, 30 m running, squats and leg presses. Additionally, isokinetic strength was measured using Cybex isokinetic dynamometer. The results showed that both groups demonstrated improvement in the standing long jump, standing jump and 30 m running after training. Particularly, the women's group indicated better improvement. Second, women's groups showed higher improvement in the sidestep and burpee test. However, in the reaction time test, the men's group indicated better improvement. Third, both groups showed better improvement in squats and leg presses after training. Particularly, the women's group indicated better improvement. Fourth, in the left and right side extension torque and flexion torque at a velocity of $60^{\circ}$/sec, both groups showed better improvement after training. In the left side extension peak torque, the men's group showed higher improvement, but the women's group showed higher improvement in the left side flexion and extension peak torque. Fifth, both groups showed better improvement in bench pressing and back strength after training. Particularly, the women's group indicated higher improvement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.163-177
• /
• 2016

This study suggests a method for making a system of basic materials for the restoration of the 3X3 Kan central hall remains of a Buddhist temple from the Joseon Dynasty. Because there are both an extant hall and remains from the Joseon Dynasty, the basic material can be constructed through comparison with the floor plan. Multi-step comparisons were found to be the most suitable example for restoration. For this study, five parts of the 3x3 Kan remains were compared with 70 extant halls for a case study. For the first comparison, the limit of collection makes four examples in the whole examples. There are many relationships with the area and the length ratio of the front to the side as the comparison articles, so there are examples that satisfied both comparison articles. However, there is little relationship between the length ratio of the front Eokan to the front Hyeopkan and the length ratio of side Eokan to the side Hyeopkan. The construction method of the basic material shows the possibility of expansion with various directions that have pros and cons.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.401-412
• /
• 1998

The aim of this study was to measure the regional micro-shear bond strength of dentin bonding agents to dentin, and to investigate the relationship between the micro-shear bond strength and two dentinal characteristics ; Vickers hardness and remaining dentin thickness. Twenty-four freshly extracted, noncarious human molars were selected for this study. The materials tested in this study consisted of two commercially available dentin bonding agents (MAC-BOND, ONE-STEP) and two restorative light-cured composite resins (AELITEFIL, Z100). The occlusal or side surface of tooth crown was sectioned to expose dentin, and the exposed surface was finally polished with # 600 sandpaper. Four groups of application methods were used combining the filling materials and the dentin bonding agents. The composite resin-attached tooth specimens were embeded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of 1mm $\times$ 1mm. Nine specimens were obtained from each tooth. The cut specimens were divided into three groups depending on the position of the dentin bonding surface. The micro-shear bond strength, remaining dentin thickness, and dentinal hardness were measured. Experimental results were then statistically analyzed with ANOVA. t-test, Scheffe test, and regression analysis. From this experiment, the following results were obtained : 1. In the case of occlusal surface bonding, the pooled micro-shear bond strength of ONST-AELIT group (16.62 MPa) was significantly higher than that of MACB-AELIT group (9.91 MPa) (p<0.05). However, there was no significant difference in the micro-shear bond strength depending on the dentin position (p>0.05). 2. In the case of side surface bonding of crown, the pooled micro-shear bond strength of four different bonding groups was not significantly different among each other (p>0.05). However, in three of the test groups (ONST-AELIT, MACB-Z100, ONST-Z100), the micro-shear bond strength to the lower 1/3(III) position was significantly lower than that to middle 1/3(II) position of surface (p<0.05). 3. In the ONST-AELIT bonding group, the pooled micro-shear bond strength to the occlusal surface was significantly lower than that to the side surface of crown (p<0.05). 4. There was no significant correlation between the micro-shear bond strength and dentin hardness / remaining dentin thickness (p>0.05).

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.2
• /
• pp.308-315
• /
• 2014

The aims of this study are to analysis about surface muscle activity of lower and upper musculus erector spinae according to walkers form. The subjects of the current step is inconvenient to use a walker and five people over the age of 65 valid samples were selected as final. All the subjects were measured in three forms. Wireless EMG muscle activity is a measure of surface measurements were measured using a system, both musculus vastus lateralis, outside the erector spinae muscle, musculus biceps femoris, gastrocnemius muscle was attached to the channel electrodes. According to the results, First, gastrocnemius muscle activity showed significant differences by type of gait. Second, the muscle activity of the erector spinae muscle walking showed significant differences by type, side grip type showed the lowest muscle activity. Consequently, the present study is the efficient use of the four-wheel walker will provide the baseline data.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.153-160
• /
• 2013

The purpose of this study was to compare biomechanical factors on badminton shoes between anti-slip outsole and non anti-slip outsole. Six subjects participated in this experiment. For three-dimensional analysis, eight cameras (Oqus 3series, Qualisys) were used to acquire raw data, and then the parameters were calculated and analyzed with Visual-3D. In conclusion, the patterns of spent time during side step, and maximum velocities of CoGs were consistent without joint angles of lower extremities in spite of small differences. Those of GRFs, and moment of lower extremities were absolutely consistent. This trend of biomechanical factors was that Y shoe (ante-treatment) was much greater and PS shoe (treatment) was greater than Y shoe (treatment). (That was, Y shoe (ante-treatment) > PS shoe (treatment) >Y shoe (treatment)). The findings of this study showed that anti-slip outsole was effective and brought increasing performance and decreasing injuries. It is suggested that further study of these phenomena will help understand many aspects of human locomotion, including work, performance, fatigue and possible injuries.