전남 화순 운주사 마애여래좌상은 운주사 석불군 가운데 유일한 마애불로써 현재 전라남도 유형문화재 제275호로 지정되어 있다. 암반의 암석은 연녹색의 안산암질 응회각력암으로써 구성광물은 석영과 장석으로 이루고 있다. 전암대 자율 측정 결과, 상부에서부터 하부까지 단일 퇴적층으로 구성되어 있다. 초음파 속도 측정 결과, 2009년에 비해 2015년은 1500~2000 m/s의 빈도수는 증가하고, 2000~2500 m/s의 빈도수는 감소하였으며, 2015년에 2000 m/s이하의 측정값이 87.5%로 2009년의 68.8%에 비해 증가하였다. 또한 마애여래좌상의 상부, 하부, 왼쪽부분 및 머리 등에서 부분적으로 저속대의 범위가 확장되는 경향이 관찰되었다. 마애불의 대한 풍화는 장기적으로 발생하기 때문에 시간 경과에 따른 변화 정도를 확인하기 위해서는 지속적인 모니터링이 필요할 것으로 판단된다.
The purpose of this study was to evaluate the marginal adaptability of the amalgam restorations in applying the cavity varnish (Copalite$^{(R)}$) and dentin bonding agent (Scotchbond 2$^{(R)}$) under the scanning electron microscope. For this study, eighteen sound extracted human molars were selected. Class I cavities in 12 teeth and class V cavities in 6 teeth were prepared using an air turbine with No. 701 tungsten carbide bur and finished using a low speed handpiece with No. 557 fissure bur. The prepared specimens were then divided into three groups including 4 class I cavities and 2 class V cavities in each group and restored as follows ; Group I. All the prepared cavities were restored with amalgam only (Control). Group II. Two layers of Copalite$^{(R)}$ cavity varnish were applied to the cavities with a gentle stream of air after each application and cavities were restored with amalgam. Group III. The enamel cavity margins were etched with 37% phosphoric acid gel for 60 sec., rinsed for 30 sec. and dried. One layer of visible lightcured Scotchbond Dental Adhesive$^{(R)}$ was applied and immediately cured for 20 seconds with visible light-cure unit and cavities were restored with amalgam. All the specimens were cut at the neck of the teeth and the occlusal halves of specimens were sectioned buccolingually in the longitudinal axis centering the amalgam restorations, using the disk. The cut specimens were ground with sandpapers (400, 600, 800, 1000 grit), and cleaned for 5 minutes in the ultrasonic cleaner (Brason Co. U.S.A.). In the cut surfaces, the amalgam - tooth interfaces were examined under the scanning electron microscope (JSM, 35C type, JEOL). The obtained results were as follows ; 1. The amalgam-tooth interfaces were reduced more significantly in the Copalite$^{(R)}$ and Scotchbond 2$^{(R)}$ application group than in the control group. 2. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed the findings similar to the Copalite$^{(R)}$ application group in the cavity floor, and the marginal adaptability was better in the side wall than in the cavity floor. 3. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed better marginal adaptability in the occlusal margin than in the gingival margin. 4. The marginal adaptability was in the order of the Scothbond 2$^{(R)}$ application group, the Copalite$^{(R)}$ application group and the control group.
The purpose of this study was to evaluate the influences of incorporation of zirconium-silicate on diametral tensile strength, shear bond strength to the enamel, and depth of cure of 7 experimental composites. One group contained no filler(group 1 or control group), and the other 6 composites contain 75% filler in which zirconium-silicate(Zr-Si) were 0%, 2%, 4%, 6%, 8%, 10% with reduced contents of silica filler, respectively. Both of fillers were treated with 1% silane (${\gamma}$-methacryloxypropyltrimethoxy silane). Light curable monomers were prepared by mixing Bis-GMA and TEGDMA with 3:1 ratio and adding camphoroquinone(CQ) 0.6% with tertiary amine 0.3%. Diametral tensile strengths of specimens with $3mm{\times}6mm$ were measured with Instron (No.4467, USA) with 1mm/min crosshead speed. Shear bond strengths of composites which bonded to bovine enamel etched with 37% phosphoric acid were measured at Instron Testing Machine with as same speed as in diametral tensile strengths. Depth of cure were measured by a method that composite was filled in cylinder mold, illuminated at one side. and uncured composite was removed with acetone, and the residual thickness of composite was measured. Following results were obtained ; 1. Composites containing 0%, 2%, or 4% zirconium-silicate filler(group 2, 3 and 4) showed the statistically higher diametral tensile strength than the others. (p<0.05) 2. Increase of zirconium-silicate filler contents reduced the diametral tensile strength of experimental composites. ($r^2$=0.8721, p=0.0002) 3. Increase of zirconium-silicate filler contents did not affect the shear bond strength of experimental composites. ($r^2$=0.2815, p=0.4067) 4. Increase of zirconium-silicate filler contents reduced significantly the depth of cure of experimental composites. ($r^2$=0.9700, p<0.0001) These results mean that the mechanical properties of composites could not be improved by incorporation of small amount of zirconium-silicate filler. Also, the increased contents of zirconium-silicates fillers was found to reduce the diametral tensile strength and depth of cure.
최근 중요한 매핑기술이 된 LiDAR(Light Detection And Ranging)는 다른 수치표고자료 획득 기법에 비해 높은 정확도와 세밀한 밀도를 가지고 있어 3차원 모델링에 필요한 높이정보를 제공한다. 이러한 시스템의 가장 중요한 작업은 디지털화된 리턴 펄스의 모양을 이해하여 수신권내의 반사되어 오는 시간을 측정하여 이와 대응되는 표면 위치를 계산하고 이를 지리좌표와 연결시키는 것이다. 디지털화된 파형(waveform)은 수신권내의 지표 형태에 따라 다른데 처음 발생된 펄스와 같은 단일 모드이거나 수신권내에 여러 표면이 있는 경우 각 반사 표면에 해당하는 여러 모드로 구성된 복잡한 파형일 수 있다. 자료처리 과정에서 반사표면에 대해 일관성 있는 거리측정 지점을 찾기 위해서는 리턴 파장에서 각 모드의 중심위치나 피크 진폭의 위치를 찾아내는 방법이 필요하다. 복잡한 파장의 경우에는 여러 개의 반사지점에 대해 정확한 높이를 계산해 내는 것이 쉽지 않은데 이를 위해 각 모드가 수신권내의 반사 표면에서 레이저 에너지가 반사되는 분포를 나타낸다고 가정하고 리턴 파장을 각 구성 모드로 분해하는 방법이 제안되었다. 이때 분석을 단순화하기 위해 레이저 출력 펄스 모양이 가우시안 분포를 따른다고 가정하고 전체 리턴 파장을 다변량 가우시안(multivariate Gaussian) 분포를 이용하여 분석한다. 여기서는 혼합분포에서 정확한 피크 위치와 half-width와 같이 모형의 파라미터에 대한 추정치를 구하기 위해 EM 알고리즘을 적용하여 MLE 값을 구하였다. 그러나 실제 레이저 고도계에서 얻어진 데이터는 가우시안이 아닌 오른쪽으로 기울어진 분포를 보여주고 있어 응용분야에 따라 정확한 분석이 필요한 경우 이러한 펄스 모양을 고려한 방법이 필요하다. 본 연구에서는 이러한 펄스 모양을 처리하기 위한 새로운 방법론이 제시되어 있다.
The author used rabbits in order to examine the effect of Ga-As low power generating semiconductor laser on artificially produced injuries of experimental animals. Artificially produced injuries include surgical wound of 3mm length, 2mm depth in size on ventral skin surface of rabbit and buccal mucosa, and electrical injury formed on opposite side of skin and buccal mucosa by electrical cauterization of same length and depth, and chemical injury formed by FC(Formocresol) solution applied on the anterior dorsal part of tongue. And then, on the experimental group, Ga-As laser was irradiated beginning on the day after the wound formation and continued to irradiate every each other day for five minutes. After1, 3, 6, 9, 13th day, certain number of animals of control and experimental group were sacrified, and wound site tissue was excised to make samples and was observed under light microscope. The following is the conclusions after comparing the healing procedure of experimental and control group. The following results were obtained : 1. Inflammation was decreased more rapidly in the experimental group than the control group. 2. In the surgical, the electrical and the chemical injuries in the oral mucosa, re-epithelialization was completed more rapidly in the experimental group than the control group. In the electrical injury on the skin, re-epithelialization was completed about 6 days after wound formation on both groups. 3. In the electrical and the surgical injuries on the oral mucosa, granulation tissue formation started at 3 days after injury on both groups, but in the chemical injury, it was completed about 3 days faster in the control group than the experimental group. In the surgical wound on the skin, it was completed about 9 days after injury, but faster in the experimental group. In the electrical injury on the skin, it was faster in the control group than the experimental group. 4. In the electrical and the surgical injuries on the oral mucosa, fibrosis was started at 6~9 days after injury on both groups, but regeneration of connective tissue in the experimental group was observed much more than the control group. 5. When comparing the effect of wound healing on skin and oral mucosa of control and experimental group, granulation tissue formation and re-epithelialization in the oral mucosa was more vigorous. In conclusion, the difference of timing and the sequence of wound healing process(inflammation, re-epithelialization, granulation tissue formation, fibrosis) following Laser irradiation between control and experimental group was not observed, but the healing tissue was observed much more in the Laser irradiated group.
기능성화장품이란 이전의 단순한 피부 보습, 피부 보호의 차원에서 벗어나 피부의 주름개선, 피부의 미백에 도움, 피부를 곱게 태우거나 자외선으로부터 피부를 보호하는데 도움을 주는 제품을 말한다. 넓은 의미에서는 피부 질환이 없는 건강한 사람이 피부의 상태를 건강하게 유지시켜 피부의 이상 및 노화를 지연시키거나 개선할 목적으로 사용하는 물품을 말한다. 그러나 기능성화장품은 의약품과 달리 일정기간 특정한 부위에 사용하지 않고 장기간 지속적으로 인체 전체를 대상으로 사용하는 물품이기 때문에 인체에 대한 부작용이 없어야 한다. 이런 기능성화장품이 200l년 500품목에서 2003년에는 230여 품목으로 증가되었다. 기능성화장품의 개발과 기능성화장품의 범위확대를 위해서는 화장품의 개념이 피부의 손질개념에서 피부노화 방지와 세포부활이라는 적극적인 개념으로 바뀌어야 한다. 이를 위해서는 생명과학과 생명공학기법을 이용한 피부의 생리적 기능, 생체현상 연구, 각종 자극에 대한 피부반응연구 등의 피부기초연구와 관련기술의 극대화를 통하여 고부가가치 원료가 개발되어야 하고 피부장벽을 극복할 수 있는 나노 신소재, 피부 안전성과 효능물질의 제어흡수를 가능하게 하는 전달체의 개발 등이 이루어져야 한다.
일반적으로 전동차 보조전원장치의 출력전원 품질에 영향을 주는 주된 요인으로는 짧은 시간동안의 진폭변조로 인한 전압플리커 현상과 전동차 내부의 공기압축기 및 냉난방 환기장치 등 대용량 전동기의 반복적인 구동 등을 들 수 있다. 본 연구는 전동차내의 형광등의 전원과 관련된 플리커 현상에 대해 내장재 개조 후 형광등 32W와 개조 전 40W를 입력전원(AC220V)의 변동에 따른 광 출력(밝기) 로서 계측 비교하였다. 또한, 전압변동을 유발하는 부하변동의 주된 요인을 파악하기 위해 전동차 운행시간과 운행밀도를 고려하여 플리커 현상을 분석하였다. 연구결과, 개조 후 형광등 32W에 비해 40W 형광등이 입력전원의 변화에 대해 육안인식정도 측면에서는 20.26% 정도 덜 민감하게 반응함을 알 수 있었으며, 심한 플리커가 일어나는 전압의 경우도 19.9%로 더 낮게 측정되었다. 또한, 운행차량의 부하변동 영향에 있어서는 주로 영업차량의 운행밀도가 높고, 이용승객이 많은 혼합시간대에 보조전원장치(SIV)의 출력전압 변동으로 인한 객실형광등 플리커가 발생된다는 사실을 확인할 수 있었다. 더불어, 전동차 이용승객이 육안으로 형광등의 깜박임을 민감하게 느낄 수 있는 가능 주파수대역으로서 $8Hz{\sim}15Hz$ 임을 확인하였다.
참붕어의 난자형성과정과 수정란 난막의 미세구조를 광학현미경과 전자현미경으로 관찰한 결과는 다음과 같다. 참붕어에서 난원세포의 세포질은 호염기성이었고 핵막 내에 많은 인들이 분포하고 있었다. 제1난모세포의 경우 난황포가 단지 난세포 가장자리에만 배열되어 있었고 난막의 형성은 관찰되지 않았다. 제2난모세포에서는 난막이 형성되었고 제1난모세포에 비해서 난황포가 점점 핵쪽으로 증식된 경향을 보였다. 발생이 진행됨에 따라서 호염기성 물질들은 점점 감소하는 경향을 보였고 후에 난막주위에만 국한적으로 분포하였으며, 난막의 두께와 난자의 크기는 점점 증가되었다. 또한 성숙란으로 발생이 진행되면서 난황포들은 난황괴로 변화되었다. 참붕어의 수정란은 타원형으로 부착성이었으며 동물극쪽에서 난문이 관찰되었다. 수정란의 난막은 모두 3층으로, 부착성인 외층, 전자밀도가 서로 다른 6층상구조를 가진 중층 및 전자밀도가 높은 내층으로 구성되어 있었으며 난막표면은 부착성 섬유상 구조물로 덮여 있었다. 이상과 같이 참붕어의 난자형성과정은 생식세포의 크기 증가, 난황의 형성과 축적 및 세포질의 호염기성물질 감소로 될 수 있으며 수정란 난막의 미세구조적 특징들은 경골어류의 계통분류학에서 분류형질도 이용될 수 있을 것으로 생각된다.
본 연구는 단일 접착과정 상아질 접착제와 복합레진 사이에는 부적합성이 존재하며, 이를 개선하기 위해 중간 레진층이 필요하다는 가설을 규명하기 위해 시행되었다. 발치된 치아의 협설측 상아질에 3종의 단일 접착과정 상아질 접착제를 도포 후 광중합, 2종의 중간 레진층 적용, 광중합 또는 자가중합형 복합레진의 사용여부에 따라 30개의 실험군으로 분류하였다. 미세전단 결합강도를 측정하고 투과전자현미경 (TEM)을 이용하여 접착계면에서의 미세 누출과 수분의 이동경로를 관찰하여 접착제의 투과성을 평가하여 다음과 같은 결론을 얻었다. 중간 레진층을 적용 시 접착층의 투과도가 감소되었고 복합레진에 대한 단일 접착과정 상아질 접착제의 결합강도가 증가되었다. 따라서 시간 절약 및 간단한 접착과정을 선호하여 단순화된 상아질 접착제를 선택하는 것은 재고되어야 한다.
We identified the echinostome metacercariae in Chinese mystery snails, Cipangopaludina chinensis malleata, from Xiengkhuang Province, Lao PDR with morphologies of adult worms recovered. Total 20 snails were examined with artificial digestion method and then the collected metacercariae were orally infected to a mouse and a rat. Adult worms recovered from experimental animals were observed with a light microscope and a SEM. The metacercariae were round, 125×123 ㎛ in average size, with a moderately thick cyst wall, collar spines distributed in the head collar and excretory granules in 2 canals of excretory tube. Adult flukes (3-week-old in a rat) were elongated, ventrally curved and 5.310×1.023 mm in average size. Head collar distinct, bearing 43 collar spines with 5 end group ones on each side. Oral sucker subterminal, prepharynx very short, pharynx well developed, and esophagus relatively short. Cirrus sac well developed, with a saccular seminal vesicle, and ventral sucker very large. Ovary round and on the median line of the body. Testes tandom and elongated. Eggs operculated, elliptical and 90×57 ㎛ in average size. In the SEM observation, the head crown prominent, with 43 collar spines resembled with horns of younger stag. Scale-like tegumental spines were densely distributed on the surface between the head collar and ventral sucker, and their densities were decreased posteriorly. Conclusively, the metacercariae detected in C. chinensis malleata from Lao PDR were identified as those of Echinostoma macrorchis based on the morphological characteristics of adult worms.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.