• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.373-379
• /
• 2020

This study performed stress and fatigue life analysis of the damping hinge of a built-in side-by-side refrigerator that occurs when the door is opened to the maximum angle. An analysis of the initial design showed that stress concentration occurred at the corner between the cylinder and upper disk of the bracket pin, and the maximum stress exceeded the yield strength. The maximum stress location and the calculated fatigue life were consistent with the door opening-and-closing endurance test results for a prototype. Three cases of design improvement for the bracket pin were derived with the aim of reducing the stress concentration that appeared in the initial design. An analysis of the cases showed that inserting a fillet between the disk and the cylinder of the bracket pin reduced the stress and increased the fatigue life. Moreover, changing the disk into two steps was more favorable. In conclusion, the best design improvement was the case that the disk was changed to two steps and the fillet with a large radius was inserted. In that case, the stress was the smallest and the fatigue life was infinite.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.52-63
• /
• 2008

The side collision reconstruction algorithm is developed using three dimensional car crash analysis. Medium size passenger car is modeled for finite element analysis. Total 24 side collision configurations, four different speed and six different angle, are set up for making side collision database. Deformation index and degree index are built up for each collision case. Deformation index is a kind of deformation estimate averaging displacement of side door of crashed car from finite element analysis result. Angle index is constructed measuring deformed angle of crashing car. There are two kinds of angle index, one is measured at driver's side and the other is measured at passenger's side. Also a collision analysis information in side of cars is used for giving a basis for scientific and practical reason in a reconstruction of the car accident. The analysis program, LS-DYNA3D is utilized for finite element analysis program for a collision analysis. Those database are used for side collision reconstruction. Side collision reconstruction algorithm is developed, and applied to find the collision conditions before the accident occurs. Three example collision cases are tried to check the effectiveness of the algorithm. Deformation index and angle index is extracted for the case from the analysis result. Deformation index is compared to the established database, and estimated collision speed and angle are introduced by interpolation function. Angle index is used to select a specific collision condition from the several available conditions. The collision condition found by reconstruction algorithm shows good match with original condition within 10% error for speed and angle. As a result, the calculation from the reconstruction of the situation is reproducing the situation well. The performance in this study can be used in many ways for practical field using deformation index and degree index. Other different collision situations may be set up for extending the scope of this study in the future.

• Journal of the KSME
• /
• v.35 no.8
• /
• pp.709-715
• /
• 1995

날로 그 중요성이 대두되고 있는 환경보존 문제에 능동적으로 대응하고 여러 계층 소비자의 안 전도, 쾌적성 등에 관련된 요구, 성능의 수준향상에 효과적으로 대처하기 위해서는 차량의 경량화 기술이 가장 먼저 선행되어야 할 과제이다. 경량화를 추구하는 방법은 최적설계 개념을 이용한 구조합리화에 의한 방법과 알루미늄, 강화 플라스틱 등 신소재 대체에 의한 방법이 병행 연구 되고 있다. 이 글에서는 구조합리화를 통한 경량화 목표를 달성하기 위해 설계 초기 단계에 활용 가능한 단순 보 모델 개발의 필요성에 관해 언급하고 실차의 도어 측면 붕괴강도(door side intrusion strength), 루프 붕괴강도 (roof crush strength) 해석을 위한 단순 보 모델 개발에 관해 소개하고자 한다.

• Journal of Fashion Business
• /
• v.14 no.3
• /
• pp.75-89
• /
• 2010

The purpose of this study is to provide information how to locate a apparel store based on target age, merchandise's type and price. Three trade areas in Seoul are chosen: Myeong-dong which is the biggest trade area in Korea; Kangnam station one of representative Kangnam trade areas; and Myeongil-Dong a neighborhood trade area. This study is mainly performed by analysing the locations of the stores in the given areas. The result shows that the main apparel stores in Myeong-dong are casual wear stores for young people with the range of mid-high price. The stores in Kangnam station trade area also sell the casual wear for young people but they are mostly mid-low priced. In the trade area of Myeongil-dong, however, there are various kinds of mid-priced apparel stores for residents of all ages. Apparel stores for formal wear, casual wear, and formal-casual wear tend to be located side by side. But other kinds do not. These results show that affinity is found in some types of apparel stores by the analysis of the next-door apparel stores.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.185-191
• /
• 1999

This paper deals with a method to predict the noise level inside metro electric cars running a single-line tunnel at the speed of 80km per hour using ray tracing method, a kind of ray acoustics generally used for a high-frequency and air-born noise analysis. The interior of the car including a under-frame, seats, side doors, end doors, door-pockets, side panels, end panel, a roof panel and so on is modeled. And in order to describe the noise power coming inside, artificial noise sources are designated using sound transmission loss data of each section measured from simple tests and external noise level. The noise level inside the car is calculated and its properties are investigated. The results satisfy the criteria on noise level inside the car.

• Journal of architectural history
• /
• v.10 no.4 s.28
• /
• pp.7-21
• /
• 2001

This study is to analyze site layout traditional government office building focused on Chonui-hyon(全義縣) in Chungchong province with Chungchong-do regional maps(忠淸道地方地圖) and Eupjis(邑誌, topography) being compiled in the late Chosun dynasty. The conclusion of analysis can be summarized as follows; 1. Chonui-hyon(全義縣) in Chosun dynasty is gone with a planning principle of the capital city(Han-Seong, 漢城) with disposing Sa-Ji-Dan(社稷壇) and Gaek-Sa(客舍), which are placed to the left and right of Eupchi(邑治), and it is followed in the wake of the spatial structure of Chosun dynasty palace with disposing Dong-Heon(東軒) in front, Nae-A(內衙) at the back of it, or from side to side, also by the Dong-Heon of the center, with organizing each facility around it. 2. Dong-Heon and Gaek-Sa of Chonui-hyon is passed through three step gate, Mun-Ru(門樓), Woi-Sammun(外三門), Nae-Sammun(內三門), from Hong-Salmon(紅門), and are shown hierarchy by haying been placed at the end of approach axis. 3. Dong-Heon can be disposed by Feng-Shui(風水) which have influence on the southeast direction with Jin-San(鎭山) and An-Dae(案對), on the other hand, Gaek-Sa can be disposed by symbolic of the authority of a king. 4. Site layout by function of provincial government office is provided into four ferrite, Dong-Heon, Gaek-Sa, Nae-A, practical business territory, and eve territory is organized by official institution on a social position to radiation, by the compositive axis to be made Woi-Sammun Nae-Sammun Dong-Heon Nae-A 5. Approach process of Chnui-hyon government office is three door system similar to Kam-Young(監營) in a different way two door system in most provincial government office, also approach axis is formed by bending.

• Applied Microscopy
• /
• v.40 no.2
• /
• pp.109-116
• /
• 2010

Morphology and microstructure of the suction trap in aquatic Utricularia japonica were examined using scanning electron microscopy. Branched stems bear numerous suction traps without root formation. The traps are derived axillary from the node, and their antennae and appendages extend in a peculiar fashion. The trap walls are thin, two-celled, parenchyma tissue and simple, small glands are scattered in both internal and external surface of the trap. The entrance of the trap is surrounded by one pair of dorsal antennae and ventral appendages, where the former guides the prey to the entrance. Trap door is situated below the entrance and numerous sessile and stalked capitate trichomes cover the entrance and even on the door surface. The capitate trichomes are secretory, but four trigger hairs formed on the central areas of the door are not. They are believed to function in activating and tripping the trap door. A specialized region of the threshold come in contact with the lower portion of the door upon closing. The secretory capitate trichomes near this region are responsible for producing and secreting a mucilage-like substance which composes the velum. Two-armed bifid glands are located in the interior side of the threshold, while four-armed quadrifid glands are considerably numerous occurring over the entire inner trap wall. Bifid and quadrifid glands develop semi-spherical basal cells that connect them to the inner wall surface. Antennae, trigger hairs, capitate trichomes, bifid and quadrifid glands are more important structures in the carnivory of U. japonica.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.4
• /
• pp.7-15
• /
• 2017

Purpose: The Korean government has implemented a Barrier Free Certification System since 2008 to create a secure and convenient environment for the socially disadvantaged. The drastic increase in the number of BF-certification facilities is expected due to the revision of the system and increasing the number of certification institutions. An analysis of individual evaluation items needs to be made for the BF-Certification with public confidence. Method: Korean standard, International Standard(ISO/FDIS 21542, 2011), German Standard(DIN 18040-1, 2010), Austrian Standard(${\ddot{O}}NORM$ B 1600, 2017) and Swiss Standard(Norm SIA 500 / SN 521 500, 2009) were investigated and analyzed. A comprehensive improvement plan is proposed by comparing details of the aforementioned standards and the evaluation items of BF-Certification. Results: Many problems arise in applying existing Barrier-free standards due to changes in population structure, environmental change and the use of powered wheelchairs. International standards are being improved to solve these problems. The korean standards also require improving of the Barrier Free Law and Certification System, which reflect these trends. In korean cases, standards such as the size of the doors (width and height), the Unobstructed Manoeuvring Space and Clear Space at the Latch side of the Door are required to improve standards in accordance with international standards. In addition, the expression of laws and evaluation items of BF-Certification should be clearly defined. And the application of visual contrast standards for the enhancement of perceptions presented in international standards should be considered. Implication: Barrier Free related legal standards and evaluation items of BF-Certification that are used in Korea are required to be revised in consideration of social and environmental changes. Comprehensive improvements should be made through detailed review.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

• International Journal of Computer Science & Network Security
• /
• v.21 no.4
• /
• pp.264-271
• /
• 2021

From an information security perspective, protecting sensitive data requires utilizing algorithms which resist theoretical attacks. However, treating an algorithm in a purely mathematical fashion or in other words abstracting away from its physical (hardware or software) implementation opens the door to various real-world security threats. In the modern age of electronics, cryptanalysis attempts to reveal secret information based on cryptosystem physical properties, rather than exploiting the theoretical weaknesses in the implemented cryptographic algorithm. The correlation power attack (CPA) is a Side-Channel Analysis attack used to reveal sensitive information based on the power leakages of a device. In this paper, we present a power Hacking technique to demonstrate how a power analysis can be exploited to reveal the secret information in AES crypto-core. In the proposed case study, we explain the main techniques that can break the security of the considered crypto-core by using CPA attack. Using two cryptographic devices, FPGA and 8051 microcontrollers, the experimental attack procedure shows that the AES hardware implementation has better resistance against power attack compared to the software one. On the other hand, we remark that the efficiency of CPA attack depends statistically on the implementation and the power model used for the power prediction.