• Journal of Korea Water Resources Association
• /
• v.49 no.11
• /
• pp.931-939
• /
• 2016

Bangudae Petroglopys of the national treasure No. 285 located in elevation of 53 m to 57 m have been damaged by repetition of submergence and exposure due to the Sayeon-dam of EL.60 m constructed in down stream. In this study, as a preservation plan of the petroglyphs from the contact with water, the construction of eco-levee was suggested and its effect was investigated in the views of hydraulic engineering. It was designed to be located aside of 80 m from Bangudae Petroglyphs with the length of 440 m in streamwise direction, and it was need to construct a new channel maintaining the original hydraulic capacity and conveyance. Hydraulic characteristics such as water surface elevations and velocities near Bangudae Petroglyphs were measured after the eco-levee was installed in the hydraulic model with the scale of 1:50. It showed that there were not much changes of water surface elevations and velocities between sayeon-dam spillway EL. 60 m (Suggestion 1) and EL. 54 m (Suggestion 2). It was concluded the eco-levee could be made of natural materials like soil, pebble, gravel in terms of allowable velocity and shear stresses. The slope of water surface at Suggestion 2 was steeper, and velocities near Bangudae Petroglyphs were also faster than Suggestion 1. As the vorties occured at the left side in Suggestion 2, more detailed study is required.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.8-15
• /
• 2009

Side-channel attacks including the differential power analysis attack are often more powerful than classical cryptanalysis and have to be seriously considered by cryptographic algorithm's implementers. Various countermeasures have been proposed against such attacks. In this paper, we deal with the masking method, which is known to be a very effective countermeasure against the differential power analysis attack and propose new gate-level conversion methods between Boolean and arithmetic masks. The new methods require only 6n-5 XOR and 2n-2 AND gates with 3n-2 gate delay for converting n-bit masks. The basic idea of the proposed methods is that the carry and the sum bits in the ripple adder are manipulated in a way that the adversary cannot detect the relation between these bits and the original raw data. Since the proposed methods use only bitwise operations, they are especially useful for DPA-securely implementing cryptographic algorithms in hardware which use both Boolean and arithmetic operations. For example, we applied them to securely implement the block encryption algorithm SEED in hardware and present its detailed implementation result.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.274-282
• /
• 1998

This study deals with sinking resistance for purse seine, in the case of different d/l, ratio of twine diameter and leg length. Experiments carried out on the six types simplified reduced model seines which were made of knotless netting. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two -ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cm for seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. Experiments were measured in the observation channel of a flume tank at the static conditions Sinking motion was recorded by the two sets TV-camera for VTR which were placed in top and side of the model seine, and reading coordinate carried out by the video digitization system. An analysis were calculated out by simultaneous differential equations for numerical method by Runge - Kutta - Gill sub - routine. The results obtained were as follows: 1. Average sinking speed of seine of seine margin was fastest for Ⅵ seine followed by V, IV, III, II and I seines. 2. The coefficient of resistance for a seine wall was depended upon the ratio of d/l : KD =0.081 (d/l )-0.5 3. The coefficient of resistance for netting bundle was not depended upon the ratio of d/l :CR = 0.91 (), d : Twine diameter, l : Leg length, : Density of netting materals, $\omega$ : Density of water

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.6
• /
• pp.674-682
• /
• 2014

The purpose of this study was to identify the effect of applying oriental music therapy and reliability of electroencephalogram(EEG) equipment. The study was approved by the critical trial judge committee from ${\bigcirc}{\bigcirc}$(IRB No. 2013-07) university. In order to measure test-retest reliability for 15 subjects, EEG for same participants were measured using same method mentioned above after 2 hours from the first measurement. Same provider implemented to each person at same time. Firstly, EEG was measured for 5 minutes after the subject with attached electrodes sat on chair comfortably for 10 minutes. Then, the subject was given mental stress using the four fundamental arithmetic operations for 5 minutes, and measured EEG for another 5 minutes. After that the subject sat on the chair comfortably listening oriental medicine music therapy for 5 minutes, and EEG was measured for 5 minutes again. There was no side effect regarding music therapy reported. Raw data, which was measured in each step, were converted through FFT(fast fourier transform) and analyzed after divided into certain frequency including ${\alpha}$ wave, ${\beta}$ wave, ${\theta}$ wave, immersion wave, stabilization wave, sef100 wave, and sef95 wave. Data were analyzed using wilcoxon signed rank test, Intraclass correlation coefficient(ICC), repeated measures ANOVA with the SPSS program. In test-retes method, there were significantly differences in ${\alpha}$ wave, ${\beta}$ wave, immersion wave, stability wave, ${\theta}$ wave, sef100 wave, sef95 wave. ICC has shown a high degree of reliability that it was ${\alpha}$ wave .877, ${\beta}$ wave .855, ${\gamma}$ wave .895, immersion wave .897, stability wave .816, ${\theta}$ wave .904, sef100 wave .910, sef95 wave .776. Also, there was a statistically significant difference in ${\alpha}$ wave after applying oriental music therapy. Based on these results, it is considered that average of the channel EEG and application of oriental music therapy would be practiced by increase of sample size using this machine.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.926-929
• /
• 2007

방수로는 홍수 피해 경감을 사용되는 구조적 대책으로 최근 국내에서 널리 계획되고 있다. 이러한 방수로는 보통 횡월류위어 등으로 대표되는 유입부 구조물을 통하여 하천 본류와 연결되지만, 평상시에도 본류의 유량을 일부 분담하는 형태로 설계되는 젖은 하도(wet channel) 형태의 방수로는 별도의 유입부 구조물을 설치하지 않고 바로 본류에 연결되는 것이 일반적이다. 유입부 구조물을 통해 연결되는 방수로의 특성은 유입부 구조물의 수리학적인 특성에 의해서 많이 좌우된다. 이에 반해 젖은 하도 형태로 본류에서 바로 분기되는 방수로는 그 특성이 방수로의 폭(W), 방수로 분류각$(\theta)$등에 의해서 많이 좌우되며, 만약 설계된 방수로의 횡단면 형상이 사다리꼴 또는 직사각형 단면을 따른다면 이러한 흐름은 "제한 영마루고 횡월류위어 흐름(restricted zero-height side weir flow)"으로 분류할 수 있다. 이러한 조건에서의 흐름은 일반적인 횡월류위어 흐름과 많이 다른 것으로 알려져 있다. 본 연구에서는 이러한 방수로 폭 및 분류각을 변화시켜 방수로 분류 조건을 다양하게 구현하여 실험을 수행하였으며, 특히 분류각 변화에 따른 유량계수의 변화를 분석, 검토하였다. 또한 측정된 방류량을 기준으로 산정된 유량계수를 기존 연구자들이 제시한 영마루고(zero-height) 횡월류위어 유량계수 산정식에 의해 산정된 결과와 비교하여 분석하였다. 분석결과 분류각이 90도인 경우 본류 프루드수의 증가에 따라 유량계수가 점차 감소하였으나, 분류각이 90도 보다 작은 경우에는 본류 프루드수가 증가함에 따라 유량계수가 점차 증가하는 것으로 나타났다. 이러한 한계를 만족시킬 입체 영상) 입체영상은 영화에서 시작되었으나, 20c후반기에 들어서면서 애니메이션 분야와 모바일, 광고 패널, 텔레비전등의 매체를 이용한 입체 영상의 개발로 인하여 특정 분야에 한정 시킬 수 없으므로 영상으로 칭한다. 입체 영상은 21c에 들어서면서 영상매체의 한 분야로 급부상하고 있다. 1900년 무렵부터 연구된 입체영화(3-Dimensional motion Picture)는 In여 년이 지난 지금 대중화를 눈앞에 두고 있다. 국내에서는 놀이 동산이나 박물관등에서 흔히 볼 수 있다. 하지만 앞으로는 HDW등의 대중화로 화질의 발전을 이룬 텔레비전 분야 등에서 실용화 될 전망이다. 국제적인 흐름과 함께 국내에서도 입체 영화에 대한 연구가 활성화 되어 영상산업의 한 주류로서 대두되고 있다. 이러한 상황에서 입체영상에 대한 이해와 콘텐츠(Contents)의 개발은 기술적인 진보에 발맞추어 준비되어야 한다. 본 논문은 이러한 기술적인 계보에 발맞춘 영상 콘텐츠 개발에 박차를 가하고자 앞으로의 발전분야에 대한 기술적인 면과 기법적인 면을 제시하여 기술만 앞서고 내용은 수입하는 수입국이기 보다는 미리 준비하여 비전문가나 타국의 기술에 선점 당하지 않는 분야로 성장할 수 있는 진보적인 영상 인들의 관심과 지속적인 연구를 독려하고자 한다.시민의 휴식 및 여가선용 공간으로 활용하기 위한 사업의 기초자료로 활용되며 이미 설계검토가 시작되었다. 본 연구결과는 유수지 및 저수지의 환경개선 사업의 선두적인 성공사례로 국내 타 지역의 유사한 사업에 있어 벤치마킹을 할 수 있는 훌륭한 사례가 될 것이다.요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2415-2423
• /
• 2015

Experiments were conducted on sine wave fin-and-tube heat exchangers having oval tubes under wet condition. Oval tubes having an aspect ratio of 0.6 were made, by deforming 12.7mm round tubes. Twelve samples, having different fin pitch and tube row, were tested. Results showed that, for oval tube samples, the effect of fin pitch on j and f factor was not significant. As for the effect of tube row, the lowest j factor was obtained for one row configuration(81% of two row configuration), which is clear contrast to round tube samples, where the highest j factor was obtained for one row configuration. Possible reasoning is provided considering the flow and heat transfer characteristics of sine wave channel combined with connecting oval tubes. Comparison of $j/f^{1/3}$ with plain fin-and-tube heat exchanger having 15.9mm O.D. round tube reveals that present oval fin-and-tube heat exchanger shows superior thermal performance except for one row configuration. In other words, $j/f^{1/3}$ of the two row oval tube heat exchanger was 1.6~2.5 times larger than those of round tube heat exchanger, 1.4~2.4 times larger for three row configuration and 1.2~2.8 times for four row configuration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1239-1247
• /
• 2003

OFDM(orthogonal frequency division multiplexing) communications system is very attractive for the high data rate transmission in the frequency selective lading channel. Since OFDM has high PAPR(peak-to-average power ratio), OFDM signal may be distorted by the nonlinear HPA(high power amplifier). In this paper, we propose the DSI(dummy sequence insertion) method for OFDM communication system. Some sub-carriers are inserted for PAPR reduction. They carry the specified dummy data sequence which are used for only PAPR reduction and do not work as side information like the conventional PTS(partial transmit sequence) or SLM(selected mapping) method. We use the complementary sequence and the combination of the correlation sequence as the dummy sequence. Flipping technique is used for the DSI method to get the effective PAPR reduction. It is important that BER of the proposed method is independent of the damage of the dummy data sequence. And DSI method has better spectral efficiency than the conventional block coding. On the other hand, threshold PAPR method is applied to cut down the processing time. However, this DSI method is not better than the conventional PTS method in the respect of the PAPR reduction performance. The DSI method includes the threshold PAPR lower than the PAPR of the OFDM signal, reduces the processing time and improves the BER performance.

• Proceedings of the International Union of Geodesy And Geophysics Korea Journal of Geophysical Research Conference
• /
• 2003.05a
• /
• pp.20-20
• /
• 2003

In the summers of 1997 and 1998 and in February of 2000 we made 570 measurements of the ambient geomagnetic field 120 cm above the pavement surface of State Route 130, south of Pahoa, the island of Hawaii using a three-component fluxgate magnetometer. We measured at every 15.2 m (50 feet) interval covering a distance of 6, 310 m (20, 704 ft) where both historic and pre-historic highly magnetic basalt flows underlie. We also collected 197 core samples from eight road cuts, 489 specimens of which were subject to AF demagnetizations at 5 - 10 mT level up to a maximum field of 60 mT. We observed significant inclination anomalies ranging from a minimum of $31^{\circ}$ to a maximum $40^{\circ}$ where a uniform inclination value of $36.7^{\circ}$ (International Geomagnetic Reference Field, IGRF) was expected. Since the mean of the observed inclinations is approximately $35^{\circ}$ we assume that the study area is slightly affected by the magnetic terrain effect to a systematically shallower inclinations for being located in the regionally sloping surface of the southern side of the island (Baag, et al., 1995). We observed inclination anomalies showing wider (spacial) wavelength (160 - 600 m) and higher amplitudes in the historic lava flows area than in the northern pre-historic flows. Our observations imply that preexisting inclination anomalies such as those that we observed would have been interpreted as paleosecular variation (PSV). These inclination anomalies can best be attributed to concealed underground highly magnetic dikes, channel type lava flows, on-and-off hydrothermal activities through fissure-like openings, etc. Both the within- and between-site dispersions of natural remanent magnetization (NRM) are largest (up to ${\pm}7^{\circ}$) above the flows of 1955, while the area of pre-historic flows in the northern part of the study area exhibit the smallest dispersion. Nevertheless, mean inclinations of each historic flow of 1955 and 1790 are almost identical to that of the corresponding present field, whereas mean of NRM (after AF demagnetization) inclinations for each of the four pre-historic lava flow units is twelve to thirteen degrees lower than the present field inclination. We observed three cases of very large inclination variations from within a single flow, the best fitting curves of which are linear, second and third order polynomials each from within a single flow, whereas no present field variations are observed. This phenomena can be attributed to the notion that local magnetic anomalies on the surface of an active volcano are not permanent, but are transient. Therefore we believe that local magnetic anomalies of an active volcano may be constantly modified due to on going subsurface injections and circulations of hot material and also due to wide spacial and temporal distribution of highly magnetic basaltic flows that will constantly modify the topography which will in turn modify the local ambient geomagnetic field (Baag, et al., 1995). Our observations bring into question the general reliability of PSV data inferred from volcanic rocks, because on-going various geologic and geophysical activities associated with active volcano would continuously deflect and modify the ambient geomagnetic field.

• Journal of the Korean Geographical Society
• /
• v.42 no.6
• /
• pp.879-897
• /
• 2007

The Royal District in Gyeungju-city was placed in lower surface of alluvial fan that was formed during the Last Glacial Age. During the Holocene, Bukcheon-river was reached in the dynamic equilibrium status and the form of river channel was similar or same to the present. The cases of dying people and carrying houses away by flood for ancient history in Gyeongju were six times, in 131, 160, 350, 496, 657 and 703. Like this big flood was happened at interval of $150{\sim}200$years. A period of big flood appearance in Bukcheon-river was extremely long. Therefore the people who had lived in Gyeongju for ancient history perceived that most part of riverbed of Bukcheon-river was a safety place from flood damages. Not only private houses. In east part of Bunhwangsa temple, that is, west side of Bukcheon-river where the river energy is maximum, a pillow block was built to prevent a lateral erosion but any artificial riverbank was not. In spite of high flood possibility in Bukcheon-river, there was no facility to prevent floods in this section. Also, deposits of flood are not identified. This point is very suggestive that Bukcheon-river did not flood for ancient history.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.73-80
• /
• 2008

An hydraulic experiment was carried out in an open channel flume in order to improve the technique of designing shape of the sluice used for tidal power generation, which greatly affects the economical efficiency of the construction of a tidal power plant. To predict the influence of change in the major design parameters relating to the sluice shape on the water discharge capability of the sluice, it was necessary to perform a precise experiment that is discriminated to previous feasibility studies or design projects. For this purpose, by installing various flow straighteners and rectifying structures inside the water supply system and the rectifying tank, the flow in the flume was stabilized as tranquil as possible. In addition, the measuring instruments and the location of installing them were carefully determined so as to minimize the errors intervened during the measurement of water discharge and water level. The method of estimating head difference between upstream and downstream of the sluice was also developed by taking account of the head loss due to the friction at the bottom and side walls in the flume.