• Membrane and Water Treatment
• /
• 제7권5호
• /
• pp.463-476
• /
• 2016

In this study, application of polypropylene hollow fiber membrane contactors for $CO_2$ removal from water in liquid-liquid extraction (LLE) mode was simulated. For this purpose, a steady state 2D mathematical model was developed. In this model axial and radial diffusion was considered to $CO_2$ permeation through the hollow fibers. $CO_2$ laden water is fed at a constant flow rate into the lumen side, permeated through the pores of membrane and at the end of this process, $CO_2$ solution in the lumen side was extracted by means of aqueous diethanolamine (DEA) and chemical reaction. The simulation results were validated with the experimental data and it was found a good agreement between them, which confirmed the reliability of the proposed model. Both simulation and experimental results confirmed the reduction in the percentage of $CO_2$ removal by increment of feed flow rate.

• KIEE International Transactions on Power Engineering
• /
• 제5A권1호
• /
• pp.46-55
• /
• 2005

This paper proposes a new method for choice of the best transmission system expansion plan on the side of highest satisfaction level of decision maker using fuzzy integer programming. The proposed method considers the permissibility and ambiguity of the investment budget (economics) for constructing the new transmission lines and the delivery marginal rate (reliability criteria) of the system by modeling the transmission expansion problem as a fuzzy integer programming one. It solves the optimal strategy (reasonable as well as flexible) using a fuzzy set theory-based on branch and bound method that utilizes a network flow approach and the maximum flow-minimum cut set theorem. Under no or only a very small database for the evaluation of reliability indices, the proposed technique provides the decision maker with a valuable and practical tool to solve the transmission expansion problem considering problem uncertainties. Test results on the 63-bus test system show that the proposed method is practical and efficiently applicable to transmission expansion planning.

• Structural Monitoring and Maintenance
• /
• 제6권3호
• /
• pp.219-235
• /
• 2019

Scheduled inspections of common crossings are one of the main cost drivers of railway maintenance. Prognostics and health management (PHM) approach and modern monitoring means offer many possibilities in the optimization of inspections and maintenance. The present paper deals with data driven prognosis of the common crossing remaining useful life (RUL) that is based on an inertial monitoring system. The problem of scheduled inspections system for common crossings is outlined and analysed. The proposed analysis of inertial signals with the maximal overlap discrete wavelet packet transform (MODWPT) and Shannon entropy (SE) estimates enable to extract the spectral features. The relevant features for the acceleration components are selected with application of Lasso (Least absolute shrinkage and selection operator) regularization. The features are fused with time domain information about the longitudinal position of wheels impact and train velocities by multivariate regression. The fused structural health (SH) indicator has a significant correlation to the lifetime of crossing. The RUL prognosis is performed on the linear degradation stochastic model with recursive Bayesian update. Prognosis testing metrics show the promising results for common crossing inspection scheduling improvement.

• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.649-655
• /
• 2011

Methane direct cracking can be utilized to produce $CO_x$ and $NO_x$-free hydrogen for PEM fuel cells, oil refineries, ammonia and methanol production. We present the results of a systematic study of methane direct cracking using a mixed conducting oxide, Y-doped $BaZrO_3$ ($BaZr_{0.85}Y_{0.15}O_3$), membrane. In this paper, dense $BaZr_{0.85}Y_{0.15}O_3$ membrane with disk shape was successfully sintered at $1400^{\circ}C$ with a relative density of more 93% via addition of 1 wt% ZnO. The ($BaZr_{0.85}Y_{0.15}O_3$) membrane is covered with Pd as catalyst for methane decomposition with an DC magnetron sputtering method. Reaction temperature was $800^{\circ}C$ and high purity methane as reactant was employed to membrane side with 1.5 bar pressure. The $H_2$ produced by the reaction was transported through mixed conducting oxide membrane to the outer side. In addition, it was observed that the carbon, by-product, after methane direct cracking was deposited on the Pd/ZnO-$BaZr_{0.85}Y_{0.15}O_3$ membrane. The produced carbon has a shape of sphere and nanosheet, and a particle size of 80 to 100 nm.

• 한국항해학회지
• /
• 제21권4호
• /
• pp.93-102
• /
• 1997

History will be defined as a science on human beings in both space and time(des hommes dans le temps et l'espace). Navigational History is a premise to compose Maritime History. Maritime History is a branch of General History which is classified on the basis of space and will be definded as a branch of history to examine 'inter-realtions between maritime affairs and inland affairs'. Then, what kind of 'go by sea'can be a subject of Navigational History ? A research-subject of Navigational History must be navigation rather than sail or voyage. Because while 'sail' means to 'passive and noncommercial sailing' and voyage means to journeyin a general sense that includes sail and navigation, navigation means to indicate ' to go from one place to another in a ship' adn 'to convoy goods by water'. Then, how can we define Navigation History? Navigational History in a narrow sense is to be a field of studying 'process of development of nautical science and seamanship on the side of History ofScience and Techique, whereas Navigational History in a broad sense is to be a field of analyzing 'effects of historical navigation upon history on the side of General History. On studying Navigational History in a narrow sense, there are signifiacances of disclosing what the development of nautical instruments and arts of navigation have played a role in history. Navigational History in a broad sense is a branch of General History to study effects of historical navigation upon history. In conclusion, the significance of studying Navigation History is to disclose process of developmentof arts of navigation, and on the basis of this study is to reveal how the human elements operate in historical navigation. In short, it should not cease to study Navigational History in a narrow sense, and should enlarge its perspective of research toward Navigational History in a broad sense.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권1호
• /
• pp.5-7
• /
• 2022

KEPCO's plan is undergoing a trial operation to replace the open-loop section with ring main units configuration where underground distribution lines are installed, by linking the multi-way circuit breakers auto (MCA) on the power side of each pad-mounted transformer. However, ring main units application mentioned above may cause the ripple effects, when implementing the configuration without a study of protection coordination. Because ring main units with classical pre-set protection devices contribution in fault condition didn't consider yet. For the reliable ring main units operation, it is necessary to resolve several protection issues such as the protection coordination with substation side, prevention of the transformer inrush current. These issues can radically deteriorate the distribution system reliability Hence, it is essential to design proper protection coordination to reduce these types of problems. This paper presents a scheme of ring main units' configuration and MCA's settings of time-current curves to preserve the performance of protection coordination among the switchgears considering constraints, e.g. prevention of the ripple effects (on the branch section when a transformer failure occurs and the mainline when a branch line failure occurs). It was confirmed that the propagation of the failure for each interrupter segment could be minimized by applying the proposed TCC and the interrupter settings for the MCAs (branch, transformer). Further, it was verified that the undetected area of the distribution automation system (DAS) could be supplemented by having the MCA configurated ring main units operate first, instead of the internal protection equipment in the transformer such as the fuse, STP when a transformer failure occurs.

• Journal of Biosystems Engineering
• /
• 제21권3호
• /
• pp.315-324
• /
• 1996

This study was one of a series of studies on application of machine vision and image processing to extract the geometrical features of plants and to analyze plant growth. Several algorithms were developed to measure morphological properties of plants and describing the growth development of in-situ lettuce(Lactuca sativa L.). Canopy, centroid, leaf density and fractal dimension of plant were measured from a top viewed binary image. It was capable of identifying plants by a thinning top viewed image. Overlapping the thinning side viewed image with a side viewed binary image of plant was very effective to auto-detect meaningful nodes associated with canopy components such as stem, branch, petiole and leaf. And, plant height, stem diameter, number and angle of branches, and internode length and so on were analyzed by using meaningful nodes extracted from overlapped side viewed images. Canopy, leaf density and fractal dimension showed high relation with fresh weight or growth pattern of in-situ lettuces. It was concluded that machine vision system and image processing techniques are very useful in extracting geometrical features and monitoring plant growth, although interactive methods, for some applications, were required.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제9권5호
• /
• pp.101-106
• /
• 2020

컴퓨터가 보급된 이래로 정보보안을 달성하기 위해 많은 노력이 이루어졌다. 그중 메모리 보호 기법에 대한 연구가 가장 많이 이루어졌지만, 컴퓨터의 성능 향상으로 기존 메모리 보호 기법의 문제들이 발견되었고 부채널 공격의 등장으로 새로운 방어기법이 필요하게 되었다. 본 논문에서는 JMP+RAND 기법을 이용해 페이지(Page)마다 5-8byte의 난수를 삽입하여 메모리 공유 기반 부채널 공격을 방어하고 기존 메모리 보호 기법도 보완하는 방법을 제안한다. 기존 부채널 공격들의 방어기법과 달리 JMP+RAND 기법은 정적 바이너리 재작성 기법(Static binary rewriting)과 연속된 jmp 명령어, 난수 값을 이용해 사전에 부채널 공격을 방어한다. 우리는 메모리 공유 기반 부채널 공격이 JMP+RAND 기법이 적용된 바이너리를 공격하는 데 걸리는 시간을 정량적으로 계산하였고 현실적인 시간 내에 공격할 수 없다는 것을 보여주었다. 최근 아키텍처는 분기 예측(Branch prediction)을 이용해 jmp 명령어의 분기처리가 매우 빠르고 정확하므로 JMP+RAND 기법의 오버헤드가 매우 낮다. 특히 특정 프로그램에만 난수 삽입이 가능하므로 클라우드 컴퓨팅 환경에서 메모리 중복제거 기능과 함께 사용하면 높은 효율성을 보일 수 있을 것으로 기대한다.

• 대한수의학회지
• /
• 제47권1호
• /
• pp.7-17
• /
• 2007

The left main descending artery (LMDA) of left coronary artery (LCA) in rats runs around the left side of conus arteriosus after arising from the aortic sinus and descends to the apex of heart with branching several branches into the wall of left ventricle (LV). The ligation site of LMDA for myocardial infarction (MI) is the 2~4 mm from LCA origin, between the pulmonary trunk and left auricle. The characteristics that rat heart has no interventricular groove on the surface and its coronary arteries run intramyocardially with branching several branches give the difficulty in surgery for MI which resulted in expected size. This study was aimed to elucidate the branching patterns of the left coronary artery for analysis of MI size and for giving the basic data to producing small MI intentionally in 2 male species that are widely used, Sprague-Dowley (SD) and Wistar-Kyoto (WKY), in the world. Red latex casting was followed by the microdissection in 27 and 28 hearts of SD and WKY male rats, respectively. The branching patterns of LMDA were classified into 3 major types and others based on the left ventricular branches (L). The Type I, Type II, Type III and others are shown in 55.6%, 22.2%, 14.8%, and 7.4% in SD, 60.7%, 10.7%, 7.1%, and 21.5% in WKY, respectively. The branching number of the first left ventricular branch (L1) that are distribute the upper one third of LV was 1.2~1.5, and its branching sites were ranging 0.9~2.1 ᒠfrom LCA origin. L2, the second left ventricular branch distributing middle one third of LV, was the number of 1.2~1.4 and branching out ranging 5.1~5.7 mm. L3, the third left ventricular branch of LMDA distributing lower one third of LV, was the number of 1~1.5 and branching out ranging 7.0~9.3 mm from LCA origin. The common branch of L1 and L2 was branched from LMDA with the number of 1.1, and its site was located in the distance of mean of 1.5 mm and 2.8 mm in SD and WKY, respectively. The common branch of L2 and L3 was branched from LMDA with the number of 1, and its site was located in the distance of mean of 7.2 mm and 2.9 mm in SD and WKY, respectively. The right ventricular branches (R) of LMDA were short and branched in irregularly compared with L. The number of 1~4 of R were branched from LMDA. With regarding to the distribution area of L and the ligation site for MI, moderate MI (25~35% of LV) might be resulted in 70.4% and 60.7% in SD and WKY rats. Small MI might be produced intentionally if the ligation would be located at the 4~6 mm from LCA origin in the left side of LMDA. These data wold be helpful to expect the size of MI and to reproduce of small MI, intentionally, in rat hearts.

• 한국식품과학회지
• /
• 제34권4호
• /
• pp.583-589
• /
• 2002

펙틴에서 곁사슬의 정도가 다르게 제조된 사과펙틴과 토마토펙틴을 이용하여, 낮은 층밀림속도에서부터 높은 층밀림속도까지 적용이 가능한 유변학적 모델을 구하고자 하였다. 지수법칙모델, Cross 모델, Carreau 모델을 실험값에 비교하여 본 결과, Carreau 모델이 가장 적합하였다. 모델식에서 얻어진 층밀림속도 0에서의 점도$({\eta}_0)$는 곁사슬의 정도가 큰 사과펙틴의 경우에는 곁사슬이 많은 sample II가 적은 sample I보다 크게 나은 반면에 곁사슬이 적은 토마토 펙틴은 큰 차이를 보이지 않았으며, 그 값은 사과펙틴보다 크게 나타났다. 모델식의 계수를 펙틴농도에 대한 지수함수로 표현하여 펙틴에서 곁사슬의 영향을 살펴보았다. 즉, 곁사슬이 많은 사과펙틴은 토마토펙틴에 비해 유변학적 성질이 큰 차이를 보이고 있으며 모델로 설명할 수 있다.