• Applied Biological Chemistry
• /
• v.6
• /
• pp.61-77
• /
• 1965

In this experiment, Akiochi was studied especially on plant growth on the degraded soils. Besides, such soils were carefully examined on its character and plant body was analysed to know the difference in various mineral contents. For this purpose, paddy cultivation was done with the variety Pal Dal at Suwon, Sosa and Pyungtak. Three plots were chosen at each location as the normal and 2 levels of akiochi, a-the stronger and b-the weaker. Harvests from these 9 plots were measured agronomically and also chemically analysised. As for soil, after an observation on vertical section of soil, samples from each layer were also studied both physically and chemically. The results are summarized as follows. 1. Outer changes in rice plant and changes in yield components. 1) Rice from Akiochi soil showed remarkably shortened culm length, head length, protrusoion length, blade length of boot leaf, and coleoptile length, compared with that from the normal paddy field. 2) There was a tendency for Akiochi rice to have more heads per plant. 3) Akiochi rice showed poorer intercalary growth of upper 3 internodes. The ratio of this upper internode length to total culm length was also smaller in this case. Consquently the ratio of lower internode length to total culm length became larger than that from normal peddy field. 4) Akiochi rice showed significantly fewer first spikelets and attached grains of head at main stem. 5) Maturing rate of both this main seem of whole plant body was remarkably lower than that of normal rice. 6) Akiochi rice showed lower head weight of main stem, total hulled rice weight, total grain yield, 1000-grain weight, straw weight and straw-hulled rice ratio. 2. Physical and chemical study on soil. 1) Akiochi soil showed thinner upper layer and total thickness of upper and lower parts was smaller than that of normal. 2) Akiochi soil of Suwon was mainly composed of sand, while that of Sosa and Pyungtak was composed of heavy clay. 3) Chemical analysis indicated that content of $SiO_2$ in upper layer is always lower than that of normal. But no other common tendencies were found. 4) This analysis further lillustrates lower content of Fe, & Mn at Suwon ; of Mn at Sosa and higher content of Fe at Sosa and organic matters at Pyungtak. 5) Some differences in the content of N in each plot could be marked though irregular. 3. Chemical Composition of plant body. 1) Chemical analysis on grain, boot leaf and straw did not suggest any remarkable differences between normal and Akiochi rice, except that the latter contains less Si in boot leaf and less Mn in straw. 2) Contents of each chemical element were measured in grain and straw to calculate the percentage of element content in grain to that of whole plant body including both grain and straw. Here, Akiochi rice always showed lower value in N, K and Mn. 4. Relationship between chemical composition of plant body and that of soil. Akiochi soil at Sosa marked lower content of Mn. This caused another lower content of this element in grain, boot leaf and straw. But except that, no remarkable relationship could be found in this study.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.4
• /
• pp.172-176
• /
• 2005

Recently, many researches on the high-voltage 5 V class cathode material have focused on $LiNi_{0.5}Mn_{1.5}O_4$, where $Mn^{3+}$ in the existing $LiMn_2O_4 (Li[Mn^{3+}][Mn^{4+}]O_4)$ is replaced by $Ni^{2+}(Li[Ni^{2+}]_{0.5}[Mn^{4+}]_{1.5}O_4)$ in order to utilize $Ni^{2+}/Ni^{4+}$ redox reaction in the 5V region. The partial substitution of Mn in $LiMn_2O_4$ for other transition metal element, $LiM_yMn_{1-y}O_4$(M=Cr, Al, Ni, Fe, Co, Cu, Ga etc) is known as a good solution to overcome the problems associated with $LiMn_2O_4$ like the gradual capacity fading. In this study, we synthesized $LiNi_{0.5}Mn_{1.5}O_4$ through a mechanochemical process and investigated its morphological, crystallographic and electrochemical characteristics. The results showed that 4 V peaks had been found in the cyclic volammograms of the synthesized powders due to the existence of $Mn^{3+}$ from the incomplete substitution of $Ni^{2+}$ for $Mn^{3+}$ implying that the mechanochemical activation alone was not good enough to synthesize an exact stoichiometric compound of $LiNi_{0.5}Mn_{1.5}O_4$. The synthetic condition of mechanochemical process, such as type of starting materials, ball-mill and calcination condition was optimized for the best electrochemical performance.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.359-365
• /
• 2013

Chrysanthemum is one of the most popular ornamental plants worldwide. Recently, lots of new and novel chrysanthemum varieties have been developed using mutagenesis. However, there was no study for comparison of tissue culture condition among the mutant varieties derived from one original variety, until now. This study was conducted to compare the efficient regeneration condition of the two chrysanthemum mutant varieties, 'ARTI-purple' and 'ARTI-queen'. Two different flower parts (disk and ray florets) at the unopened and early blooming stages were used for comparison of regeneration condition on MS medium supplemented with combinations of three growth regulators (BA, NAA, and IAA). The highest regeneration rate was identified on the NAA and BA combination when the disk florets at unopened blooming stage are used. The best optimum combinations of growth regulators were identified as NAA $1.0mg{\cdot}L^{-1}$ and BA $0.5mg{\cdot}L^{-1}$ at 'ARTI-purple', which displayed 47.9% regeneration. However, regeneration of 'ARTI-queen' was the highest as 25.6% at NAA $2.0mg{\cdot}L^{-1}$ and BA $1.0mg{\cdot}L^{-1}$. There results indicate that there is a difference for the optimum regeneration condition between the mutant varieties derived from one original variety. These results will be useful for construction of efficient regeneration system of diverse chrysanthemum mutants developed by mutation breeding.

• Journal of Chest Surgery
• /
• v.36 no.10
• /
• pp.721-727
• /
• 2003

Background: Parenteral tetracycline is no longer available for pleural sclerosing agent for pleurodesis in Korea due to the discontinuation of the production. The purposes of this study were to determine whether oral doxycycline (ODC) could be used as an effective sclerosing agent for pleurodesis, and to compare the effectiveness of ODC to other agents, such as homologous blood and talc. Material and Method: Twenty male rats were divided into four groups (A to D). Following agents were given to each group intrapleurally; 10 $m\ell$/kg of 0.9% saline to group A, 10 mg/kg of ODC to group B, 2 $m\ell$/kg of homologous blood to group e, and 70 mg/kg of talc slurry to group D. All animals were sacrificed 28 days after instillation. The pleural spaces were assessed grossly and microscopically and were graded from 0 to 3, and the thicknesses of the pleura were measured. Result: The gross score of group A was 0.0, group B was 1.4$\pm$0.9, group e was 1.0$\pm$0.7, and group D was 2.2$\pm$0.8. Significant adhesion were examined in group B and D grossly (p < 0.05). The pleural thickness of group A was 0.7$\pm$0.2 /10$^2$ mm, group B was 1.2$\pm$0.4 /10$^2$ mm, group C was 1.4$\pm$0.4 /10$^2$ mm, and group D was 3.5$\pm$0.9 /10$^2$ mm. Group D showed pleural thickening significantly (p < 0.05). The microscopic score of group A was 1.0, group B was 1.7$\pm$0.5, group e was $1.5\pm$0.4, and group D was 2.8$\pm$0.4. Group B and D showed significant inflammations and depositions of collagen (p < 0.05). Conclusion: ODC showed significant pleurodesis grossly and microscopically, and homologous blood did not show adhesion. Talc was a significant sclerosing agent for pleurodesis causing extensive inflammation and collagen depisotion.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.168-178
• /
• 1994

Acid sulfate soils occur extensively in Gimhae area where they have been formed from the brackish alluvial sediments along the sea coast and river estuary. The strong acid environment enhances silicate weathering and thus affects the soil clay minerals. The minerals were identified through chemical, X-ray diffraction and thermal methods. The ratio of $SiO_2$ and $Al_2O_3$ in the clay fractions ranged from 3.14 to 3.77, indicating that the distribution of the clay minerals were 1 : 1 and 2 : 1 minerals. Cation exchange capacity in the clay fractions was low due to high contents of 1 : 1 minerals and hydroxy interlayered vermiculite(HIV). The B and C horizon rich in jarosite have large amounts of yellow streaks which reflect high content of $Fe_2O_3$ and $K_2O$. Vermiculite and illite were quantified from thermogravimetry(TG), kaolin minerals from both TG and differential thermal analysis(DTA), and HIV from X-ray diffraction analysis. The dominant clay minerals were kaolin minerals, vermiculite, illite and HIV. HIV considered to be formed, especially, in acid soil environments. The minor minerals were quarts, feldspar, jarosite, pyrite, hematite and goethite. Kaolin minerals were the most abundant clay minerals throughout the acid sulfate soil. Kaolin minerals, however, increased towards the top of horizons throughout the soils and HIV decreased towards the top of horizons in the soil of Gimhae series and Haecheog series. Alteration of HIV to kaolin minerals during weathering of low pH condition in deep soil horizons may explain the high quantities of kaolin minerals and the relatively low quantities of HIV in the soil at top horizons.

• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.105-111
• /
• 2015

An alginate degrading enzyme from the Vibrio crassostreae PKA 1002 strain was used to hydrolyze the water extract of Sargassum thunbergii. To obtain the optimum degrading conditions for the S. thunbergii water extract, the mixture of the water extract and enzyme was incubated at 30℃ for 0, 3, 6, 12, and 24 h, and its alginate degrading ability was measured by reducing sugar and viscosity. A temperature of 30℃ for a period of 6 h was found to be the optimal condition for the enhancement of the alginate’s degrading ability. The pH of the enzymatic hydrolysate was not significantly different from that of the water extract. Overall lightness decreased, but redness and yellowness increased after enzymatic hydrolysis. Total phenolic compounds did not differ between the water extract and the enzymatic hydrolysate. DPPH radical scavenging activity and the reducing power of the enzymatic hydrolysate were lower than those of the water extract. However, the chelating effect of the enzymatic hydrolysate (80.08% at 5 mg/ml) was higher than that of the water extract (62.29%). These results indicate that the enzymatic hydrolysate possesses an anti-oxidant activity by way of the action of the chelating effect.

• The Korean Journal of Malacology
• /
• v.30 no.3
• /
• pp.219-226
• /
• 2014

The effects of different stocking densities on the growth and survival rate of the abalone, Haliotis discus hannai, were investigated in marine net cage for two years. Stocking density was set 15, 30, 45 and 60 percentage $(=per.)/m^2$ with share to cross-sectional area per shelter. The primary rearing period (PRP) and the secondary rearing period (SRP) were conducted by a year. One year mean water temperature of PRP and SRS showed the difference about $2^{\circ}C$. In the growth (initial mean shell length of abalone : $36.14{\pm}2.28mm$) of PRP, the absolute growth rate (ARG), daily growth rate (DGR) and specific growth rate (SGR) of the $15per./m^2$ were higher than those of density groups (P < 0.05). Survival rates of all density groups were showed no significant difference. In the growth (mean shell length of abalone : $55.26{\pm}6.93mm$) of SRP, ARG, DGR and SGR of stocking density groups showed no significant difference except for $45per./m^2$ density group. Survival rate in the low-density (15, $30per./m^2$) was more than 70%, and those of the high-density (45, $60per./m^2$) were less than 31% and 9%, respectively. These results showed that the appropriate stocking density for $15per./m^2$ was seven hundred fifty number per one net cage ($2.4{\times}2.4m$), during PRP using 3-4 cm abalone in length. Also for the secondary rearing period, the optimal stocking density (shell length 5-6 cm of abalone) consider with the economical efficiency was determined to be $30per./m^2$, resulting the productivity improved.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.3
• /
• pp.137-144
• /
• 2002

To obtain the basic information about pedo-genetic properties and origin of the parent materials of "Yongil" series in Korea, this study was conducted. The soil characteristics such as chemical and sand particles of typifying pedon, and distributional patterns in the area were analysed. The typifying pedon of "Yongil" series was distributed on the top of rolling area in the eastern coastal area of Korea, Yonggan-ri, Heunghae-eup, Pohang-si, Gyongbuk province. The results are as follows; The "Yongil" series in Korea was distributed on the rolling hill under altituede of 50m, and was used for cultivated upland, and the total acreage about 376ha. The content of sand was more than 50%, however the clay content in the depth of 40~100cm of the soil profile rapidly increased. The medium sand (0.5~0.1mm in size) are dominant among sand fraction, but coarse one are rare. So the rate of medium to total sand was higher in IIB horizon as 0.62~0.76 than A and C horizons. The content of heavy minerals in medium sand was low as 1.0~6.6% and the ratio of quartz to feldspars was higher in Ap2 and B1 horizon as 1.7 than IIB horizon which had less than 1.39. The cumulative curves of sand particles in Yeongil series showed the well sorted and differ from residuum soils derived from sand stone, but similar to dune soils(Haeri series). So it could be deducted from this study that "Yeongil" series are aeolian deposits derived from aeolian materials and have bisequum profile; the upper part depth of 40cm was recent cover sand, the horizon of 40~100cm depth was developed in Pleistocene epoch from the same materials.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.1
• /
• pp.34-45
• /
• 2004

This paper describes the textural relations of mantle xenoliths and fluid inclusions in mantle-derived rocks found in alkaline basalts from Jeju Island which contain abundant ultramafic, felsic, and cumulate xenoliths. Most of the ultramafic xenoliths are spinel-lherzolites, composed of olivine, orthopyroxene, clinopyroxene and spinel. The felsic xenoliths considered as partially molten buchites consist of quartz and plagioclase with black veinlets, which are the product of ultrahigh-temperature metamorphism of lower crustal materials. The cumulate xenoliths, clinopyroxene-rich or clinopyroxene megacrysts, are also present. Textural examination of these xenoliths reveals that the xenoliths are typically coarse grained with metamorphic characteristics, testifying to a complex history of evolution of the lower crust/upper mantle source region. The ultramafic xenoliths contain protogranular, porphyroclastic and equigranular textures with annealing features, indicating the presence of shear regime in upper mantle of the Island. The preferential associations of spinel and olivine with large orthopyroxenes suggest a previous high temperature equilibrium in the high-Al field and the original rock-type was a Al-rich orthopyroxene-bearing peridotite without garnet. Three types of fluid inclusions trapped in mantle-derived xenoliths include CO$_2$-rich fluid (Type I), multiphase silicate melt (glass ${\pm}$ devitrified crystals ${\pm}$ one or more daughter crystals ＋ one or more vapor bubbles) (Type II), and sulfide (melt) inclusions (Type III). C$_2$-rich inclusions are the most abundant volatile species in mantle xenoliths, supporting the presence of a separate CO$_2$-rich phase. These CO$_2$-rich inclusions are spatially associated with silicate and sulfide melts, suggesting immiscibility between them. Most multiphase silicate melt inclusions contain considerable amount of silicic glass. reflecting the formation of silicic melts in the lower crust/upper mantle. Combining fluid and melt inclusion data with conventional petrological and geochemical information will help to constrain the fluid regime, fluid-melt-mineral interaction processes in the mantle of the Korean Peninsula and pressure-temperature history of the host xenoliths in future studies.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.13 no.2
• /
• pp.129-147
• /
• 2002

본 실험은 $\beta$-cyclodextrin을 사용하여 cholesterol을 제거한 균질우유로부터 cholesterol이 제거된 치즈 제조의 조건을 규명하고, 그 조건에 따라 제조된 cheese의 특성 및 관능 검사를 함으로써 cholesterol이 제거된 cheese의 개발 가능성을 조사하는데 그 목적을 두고 있다. 치즈 제조에 적합하다고 사료되는 낮은 균질압력에서 효과적인 cholesterol 제거율을 알아보기 위해 균질압력 0, 250, 500, 750, 1000psi(0-70kg/$cm^2$와 균질온도 40, 50, 60, $70^{\circ}$ 그리고 $\beta$-cyclodextrin 첨가량 1.0, 1.5 2.0% 등의 3가지 조건에 따라 우유를 처리하여 cholesterol이 제거된 cheese의 제조에 적합한 조건으로는 균질압력 1000psi(70kg/$cm^2$), 균질 온도 $70^{\circ}$$0^{\circ}C$, $\beta$-cyclodextrin 첨가량 2.0%로 관찰되었다. 따라서 균질온도는 $70^{\circ}$로 정하고, 균질압력을 400, 600, 900, 1200si(0,- 91kg/$cm^2$)로, $\beta$-cyclodextrin 첨가량을 1과 2%로 처리하여 제조한 cheese와 균질을 하지 않고 $\beta$-cyclodextrin의 처리를 하지 알은 control 치즈간의 수율, cholesterol 제거율, mettability, stretchability, oiling off, 조직검사, 관능검사 등의 실험을 실시하여 control 치즈와 가장 유사한 cholesterol이 제거된 cheese 개발의 가능성을 시도하였고, 그 결과는 다음과 같다. 1. Cholesterol을 제거한 cheese의 제조에서 최적조건은 균질압력 1200psi(70kg$cm^2$), 균질온도 $70^{\circ}$, $\beta$-cyclodextrin 첨가량 2%였으며, 이때 우유의 cholesterol의 제거율이 86.05%로 가장 높게 나타났다. 2. Cholesterol을 제거한 cheese들의 수율은 모두 12.53%(control 10.54%) 이상으로 균질 처리가 cheese의 수율을 18.88%이상 향상시키는 것으로 나타났다. 3. 유지방 함량 23.80%인 control 치즈의 cholesterol 함량은 81.47mg/100g이었고, 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 2%를 첨가한 cheese에서는 cholesterol 함량이 20.15mg/100g으로 cholesterol 제거율이 75.27%로 가장 높게 나타났다. 4. Meltability는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 1과 2%로 처리한 치즈에서 2.25cm(control 3.34cm)로 가장 낮았으며, 균질압력이 증가할수록 meltability가 감소하여 치즈의 품질을 저하시켰다. 5. Control 치즈의 stretchability는 30cm 이상 늘어나 가장 양호한 수치인 5점을 나타낸 반면, cholesterol을 제거한 cheese에서는 5~10cm 사이를 나타내어 2점으로 stretchability가 저하된 것을 볼 수 있었다. 6. Oiling off는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 1과 2%로 처리한 치즈에서 0.03%(control 2.46%)로 가장 낮았으며, 균질압력이 증가할수록 oiling off는 감소하여 치즈의 외관상 품질을 향상시켰다. 7. Hardness, gumminess, chewiness는 균질압력 1200psi(91kg/$\textrm{cm}^2$)에 $\beta$-cyclodextrin 1%로 처리한 치즈에서 각각 나타내었으며, control과 cholesterol을 제거한 치즈들 사이에 유의적 (p<0.05) 차이를 보이며 큰 감소를 나타내었다. 8. Cholesterol을 제거한 cheese의 appearance와 flavor는 1200psi (91kg/$cm^2$)일 때 각각 가장 높은 5,56과 4.63(control 4.00)으로 균질압력이 증가하면서 향상되었으며, texture score는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 2%일때 1.22(control 4.00)로 가장 낮은 수치를 나타내었고, 균질이 cheese의 texture score를 상당히 저하시키는 것을 알 수 있었다. 9. 이 실험결과, 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 2% 첨가한 cheese에서 cholesterol 제거율이 75.27%로 가장 높았으며, 균질처리가 cheese의 수율, oiling off, appearance score, flavor scope 등을 향상시켰고, meltability, stretchability, hardness, gumminess, chewiness, texture score를 저하시키는 것으로 나타나 cholesterol이 상당부분 제거된 cheese의 개발 가능성이 관찰되었다.