• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.583-588
• /
• 1990

Glass films in the binary system B2O3-SiO2 and Al2O3-SiO2 were prepared on soda-lime-silica slide glass by the dip-coating technique from TEOS and boric acid or aluminum nitrate. Thickness of the films varying with viscosity and withdrawal speed were measured and effect of composition and firing temperature on the properties such as transmittance and refractive index were investigated. nM2O3.(100-n)SiO2(M=B or Al) films containing up to 20mol% B2O3 and 40mol% Al2O3 were transparent. Maximum transmittance at visible range were obtained for the sample containing 15mol% Ba2O3 and 32.5mol% Al2O3 and heat-treated at 50$0^{\circ}C$, respectively. Refractive index of the film containing 15mol% B2O3 was mininum in the B2O3-SiO2 binary system and minimal refractive index was appeared at the film containing 32.5mol% Al2O3. In IP spectra, addition of B2O3 were increased absorption peak intensity of B-O and Si-O-B bond and addition of Al2O3 were decreased absorption peak intensity of Si-O bond, respectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.51.1-51.1
• /
• 2010

We present the interim results of simultaneous observations of SiO and H2O masers toward 401 known stellar SiO and/or H2O maser sources (166 both SiO and H2O maser sources, 83 only SiO maser sources, and 152 only H2O maser sources) using KVN_Yonsei telescope. The results of 166 known SiO/H2O maser sources will be presented by Kim et al. and the results of 83 only SiO maser sources and 152 only H2O maser sources presented here. Both SiO and H2O maser emission were detected from 30 sources giving a detection rate of 36 % toward known 83 only SiO maser sources, while they were detected from 66 sources giving a detection rate of 43 % toward known 152 only H2O maser sources at one epoch observation. Only SiO masers were detected from 42 sources toward 83 only SiO sources, while they were detected from 28 sources toward 152 only H2O sources. Characteristics of these observed sources in the IRAS two-color diagram is investigated including mutual relations between SiO and H2O maser emission. In addition, these results will be useful for statistical study of late-type stars and future VLBI observations.

• Journal of the Korean Chemical Society
• /
• v.61 no.4
• /
• pp.179-184
• /
• 2017

In this paper, a $ZnO/SiO_2$ nano-composite was prepared by a simple chemical method at room temperature. For the synthesis of ZnO nanoparticles (NPs), a sonochemical method was used, and $SiO_2$ NPs were prepared by precipitation method. The formation of $ZnO/SiO_2$ NCs was characterized by X-ray diffractometer (XRD) and confirmed by field-emission scanning electron microscopy (FE-SEM) and Fourier transform infra-red spectroscopy(FT-IR). The photocatalytic properties of $ZnO/SiO_2$ NCs formed at different concentrations of $SiO_2$ were evaluated by rhodamine-B dye. It was confirmed that increasing $SiO_2$ concentration resulted in an increase in the photocatalytic property. In addition, the antibacterial activity of $ZnO/SiO_2$ NCs was conducted against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). As a result, the antibacterial activities of E.coli and S. aureus were increased in the presence of thick SiO NPs layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.215-215
• /
• 2010

실리콘 산화막 ($SiO_2$)의 성장 과정에서 발생하는 $SiO_2$ 층에 포획된 전자-정공, Si-$SiO_2$ 계면 영역의 산화물 고정 전하와 Si-$SiO_2$ 계면의 표면 준위에 포획된 전하와 같은 $SiO_2$ 의 결점에 의해 전계효과 트랜지스터 소자의 전기적 특성을 저하하여 신뢰성을 높이는데 한계점이 발생한다. $SiO_2$ 의 결점에 의한 전계효과 트랜지스터 소자의 전기적 특성 변화에 대한 연구는 활발히 진행되었으나, 전계효과 트랜지스터 소자에서 셀 사이즈가 감소함에 따라 전기적 특성에 대한 연구는 많이 진행되지 않았다. 본 연구에서는 산화나 산화 후 열처리 과정 동안에 생기는 Si-$SiO_2$ 계면에서의 산화물 고정 전하의 위치에 따른 전계효과 트랜지스터 소자의 전기적 특성 변화를 TCAD 시뮬레이션 툴인 Sentaurus를 사용하여 관찰하였다. Si-$SiO_2$ 계면 근처의 실리콘 산화물내에 위치시킨 양전하를 산화물 고정 전하로 가정하여 시뮬레이션 하였다. 또한 40 nm의 전계효과 트랜지스터 소자에서 산화물 고정 전하의 위치를 실리콘 산화 막의 가장자리부터 중심으로 10 nm씩 각각 차이를 두고 비교해 본 결과, $SiO_2$의 가장 자리보다 $SiO_2$의 한 가운데에 산화물 고정 전하가 고정되었을 때 전류-전압 특성 곡선에서 문턱전압의 변화가 더 뚜렷함을 알 수 있었다. 산화물 고정 전하를 Si-$SiO_2$ 계면으로부터 1~5 nm 에 각각 위치시켜 계산한 결과 산화물 고정 전하에 의해 문턱 전압이 전류-전압 특성 곡선에서 낮은 전압쪽으로 이동하였고, 산화물 고정 전하가 Si-$SiO_2$ 계면에 가까울수록 문턱 전압의 변화가 커졌다. 이는 전계효과 트랜지스터 소자에서 Si-$SiO_2$ 계면의 산화물 고정 전하에 의해 실리콘의 전위가 영향을 받기 때문이며, 양의 계면전하는 반도체의 표면에서의 에너지 밴드를 아래로 휘게 만들어 문턱전압을 감소하였다.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.714-722
• /
• 2019

Catalysts were prepared by using incipient wetness impregnation method with 17 wt% Ni on a support ($SiO_2-Y_2O_3$, $Al_2O_3$, $SiO_2-ZrO_2$, $SiO_2$, $TiO_2$, MgO) and the catalytic activity in the reductive amination of ethanol with ammonia in the presence of hydrogen was compared and evaluated. The catalysts used before and after the reaction were characterized using X-ray diffraction, nitrogen adsorption, ethanol-temperature programmed desorption (EtOH-TPD), isopropanol-temperature programmed desorption (IPA-TPD), and hydrogen chemisorption etc. In the case of preparing $ZrO_2$ and $Y_2O_3$ supports, the small amount of Si dissolution from the Pyrex reactor surface provoked the formation of mixed oxides $SiO_2-ZrO_2$ and $SiO_2-Y_2O_3$. Among the catalysts used, $Ni/SiO_2-Y_2O_3$ catalyst showed the best activity, and this good activity was closely related to the highest nickel dispersion, and low desorption temperature in EtOH-TPD and IPA-TPD. The low catalytic activity on Ni/MgO catalysts showed low activity due to the formation of NiO-MgO solid-solutions. In the case of $Ni/TiO_2$, the reactivity was low due to the low nickel metal phase due to strong metal-support interaction. In the case of using a support as $SiO_2-Y_2O_3$, $Al_2O_3$, $SiO_2-ZrO_2$, and $SiO_2$, the selectivities of ethylamines and acetonitrile were not significantly different at similar ethanol conversion.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.51.2-51.2
• /
• 2010

We have carried out an extensive statistical analysis based on the results of simultaneous observations of SiO and $H_2O$ masers toward 166 known SiO and $H_2O$ maser sources using KVN_Yonsei radio telescope (Kim et al.2010, ApJS submitted). We investigate the distributions of the mean velocities and the intensity ratios between SiO and $H_2O$ maser emission including those between SiO v=1 and v=2,J=1-0 transitions according to type of evolved stars. We also investigate mutual relations between SiO and $H_2O$ maser properties(total flux densities and velocity structures etc.) according to stellar pulsation phases. Most of SiO masers appear around the stellar velocity (80 % within ${\pm}5km\;s^{-1}$), while $H_2O$ masers show a different characteristic compared with SiO masers (69% within ${\pm}5km\;s^{-1}$). In addition, we investigate a correlation between $SiO/H_2O$ maser emission and AKARIFIS flux density as well as the AKARI color characteristics of SiO and $H_2O$ observational results in the AKARIFIS two-color diagram.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3767-3771
• /
• 2012

In this study, we investigate the potential use of $TiO_2@SiO_2$ and $ZnO@SiO_2$ core/shell nanoparticles (NPs) as effective UV shielding agent. In the typical synthesis, $SiO_2$ was coated over different types of $TiO_2$ (anatase and rutile) and ZnO by sol-gel method. The synthesized $TiO_2@SiO_2$ and $ZnO@SiO_2$ NPs were characterized by UV-Vis, XRD, SEM and TEM. The UV-vis absorbance and transmittance spectra of core@shell NPs showed an efficient blocking effect in the UV region and more than 90% transmittance in the visible region. XRD and SAED studies confirmed the formation of amorphous $SiO_2$ coated over the $TiO_2$ and ZnO NPs. The FESEM and TEM images shows that coating of $SiO_2$ over the surface of anatase, rutile $TiO_2$ and ZnO NPs resulted in the increase in particle size by ~30 nm. In order to study the UV light shielding capability of the samples, photocatalytic degradation of methylene blue dye on $TiO_2@SiO_2$ and $ZnO@SiO_2$ NPs was performed. Photocatalytic activity for both types of $TiO_2$ NPs was partially suppressed. In comparison, the photocatalytic activity of ZnO almost vanished after the $SiO_2$ coating.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.558-563
• /
• 2000

$Y_2SiO_5:Ce$ phosphor was coated with $In_2O_3$, $Al_2O_3$ and $SiO_2$ and then their cathodoluminance(CL)proper-ties required in field emission display were investigated. It was found that luminance efficiency and aging p개perty of $Y_2SiO_5:Ce$ phosphor was decreased with $In_2O_3$coating. For the case of coating, the luminance intensity was in blue phosphor was dramatically increased with $SiO_2$ coating. And also the aging property of $Y_2SiO_5:Ce$ Phosphor coated with $SiO_2$ was significantly improved compared to non-coated sample.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.25-29
• /
• 2008

Reliability and performance in metal gate/high-k device with multiple gate dielectrics were investigated. MOSFETs with a thin $HfSiO_x$ layer on a thermal Si02 dielectric as gate dielectrics exhibit excellent mobility and low interface trap density. However, the distribution of threshold voltages of $HfSiO_x/SiO_2$ stack devices were wider than those of $SiO_2$ and $HfSiO_x$ single layer devices due to the penetration of Hf and/or intermixing of $HfSiO_x$ with underlying $SiO_2$. The results of TZDB and SILC characteristics suggested that a certain portion of $HfSiO_x$ layer reacted with the underlying thick $SiO_2$ layer, which in turn affected the reliability characteristics.

• Journal of the Korean Ceramic Society
• /
• v.37 no.3
• /
• pp.280-287
• /
• 2000

Adsorption behavior and amount of phenolic resin followed silica (SiO2) formation onto silicon nitride(Si3N4) surface were investigated using electrokinetic sonic amplitude (ESA) technique and with UV spectrometer, to fabricate Si3N4/SiC nano-composite based on reaction between SiO2 formed and phenolic resin absorbed onto Si3N4 particle. The amount of SiO2 formed and carbon from phenolic resin absorbed onto Si3N4 surface were calculated quantitatively to adjust the reaction between SiO2 and phenolic resin, resulting in no residual SiO2 and carbon. As a result, pre-heated tempeature for optimized reaction was below 25$0^{\circ}C$, in which there was no residual SiO2 and carbon.