• 제목/요약/키워드: SiC-Si composite

검색결과 802건 처리시간 0.062초

Si3N4/SiC 복합 세라믹의 온도에 따른 크랙 힐링 관찰과 확산거동 (Crack Healing Behavior with Healing Temperature in Si3N4/SiC Composite Ceramics)

  • 송오성;안도 코토지;다카하시 코지;나가오 와타루;류지호
    • 한국재료학회지
    • /
    • 제15권12호
    • /
    • pp.780-785
    • /
    • 2005
  • To investigate the microcrack healing behavior of $Si_3N_4-20wt\%SiC-8wt\%Y_2O_3$ composite ceramics(SNCY8), we observe the crack length evolution a! the time of 20, 40, 60 minutes with in-situ optical microscopy by varying healing temperature of $800\~1200^{\circ}C$. Crack healing obviously occurred as heating temperature and time increased. We proposed a simple model of effective diffusion based on the crack length evolution with healing condition, and determined the effective diffusion coefficient as Our result implies that we may predict the healing ability quantitatively with temperature and time in structural ceramics through the effective diffusion coefficient model.

화학증기침투에 의한 촉매지지체용 C/SiC 복합체 제조에 관한 수치모사 연구 (Studies on the Modeling of the Preparation of the C/SiC Composite for catalyst support by CVI)

  • 이성주;김미현;정귀영
    • Composites Research
    • /
    • 제13권4호
    • /
    • pp.33-41
    • /
    • 2000
  • 본 연구에서는 촉매지지체의 내구성과 내산화성을 향상시키기 위해 활성탄소에 SiC층을 형성하는 것에 관한 수치모사가 수행되었다. 이염화이메틸규소(DDS)로부터 탄화규소를 활성탄소 기공의 내부에 침투 증착시켜 기공성 구조를 유지하면서 활성탄소에 SiC층이 형성된다. 여러 다른 증착 조건에서 모사된 탄화규소의 물성을 연구함으로써 지지체 제조의 최적 증착 조건을 결정하였다. 정상상태하의 등온 반응기 안에서 대류, 확산 및 반응을 모사하여 시간의 경과에 따른 증착량, 기공 반경, 표면적의 변화 등을 구하였다. DDS의 농도가 낮고 반응압력이 작을수록 시료 기공내에 고른 증착이 얻어졌다. 또한 기공내부 증착에서 입자외부 표면 증착으로 바뀌므로 기공직경과 표면적들이 어느 시점에서 변곡점을 갖는 것이 관찰되었다.

  • PDF

Creep Behavior of Hot Extruded Al-5% SiC Composite Powder

  • Monnazah, A. Hosseini;Simchi, A.;Reihani, S.M. Seyed
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1059-1060
    • /
    • 2006
  • The creep behavior of Al-5vol.% SiC composite was investigated. The composite powder was produced by mechanical milling and hot extruded at $450^{\circ}C$ at ratio of 16:1. A creep test was carried out at a constant load at 598, 648, and 673 K. Using the steady-state equations, the threshold stress and the stress exponent of the creep as a function of temperature were determined. The stress exponent was found to be 3 at the temperature of 673 K and 8 at 598 and 648 K. The dependency of the threshold stress to temperature obeys the Arrhenius relationship with the energy term of $29\;kJ\;mole^{-1}$.

  • PDF