• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.128-129
• /
• 2005

In this research, non-volatile memory effects and nano-crystal creation have been investigated in SiNx containing Si nano-crystals (Si-nc) produced by ICP-CVD and rapid thermal annealing. The quantum dots were created during rapid thermal annealing of Si-rich SiNx thin films. The quantum dot creation was analyzed with photoluminescence spectra, and in case of Si-rich SiNx, it is conformed that the quantum dots are formed easily at 750$\sim$800nm wavelength.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.147-147
• /
• 2010

태양전지의 효율 향상을 위해 웨이퍼 표면에 반사방지막 코팅을 위한 패시베이션 물질들에 대한 연구가 활발히 진행 되고 있다. 이 과정에서 널리 사용하는 ARC 물질로 SiNx 박막이 있다. SiNx 박막은 PECVD 법으로 저온에서 실리콘 기판 위에 증착 가능한 장점이 있다. 플라즈마 분위기 가스로 아르곤 또는 질소 사용하며 SiNx 박막의 광학적, 전기적인 특성은 화학적 조성비에 의해 결정되며 증착온도 가변에 박막의 특성이 변화하며 이를 이용하여 태양전지의 효율을 향상 시킬 수 있다. 본 연구에서는 SiNx 박막을 형성하는데 질소 가스 분위기에서 PECVD를 이용하여 증착하고 그 특성을 분석하였다. 박막은 0.8 Torr의 압력에서 $150^{\circ}C\;{\sim}\;450^{\circ}C$의 기판온도로 증착되었으며 이때의 RF power은 100W ~ 300W로 가변 되었다. 증착된 박막은 1.94 에서 2.23의 폭넓은 굴절률 값을 가지고 있었다. $SiH^4/NH_3$ 가스 비의 증가에 따라 박막 두께와 굴절률이 감소함을 확인할 수 있었다.증착된 SiNx 박막의 소수반송자 수명 측정 결과 굴절률 2.23인 박막의 경우 약 87 us의 수명을 나타냈으며, 굴절률이 1.94로 줄어듦에 따라 소수 반송자 수명 역시 79 us로 감소하였다. SiNx 박막은 n-rich 보다 Si-rich 인 경우 effective 반송자 수명을 증가시켜 표면 재결합 속도를 줄이는데 유용함을 확인하였다. 또한 증착온도가 증가할수록, RF power가 증가 할수록 소수 반송자 수명 역시 증가하였다. 반사도의 경우 $SiH_4$의 비율이 증가할수록 반사도가 감소함을 확인 하였으며, 증착온도 증가에 따라, RF power 증가에 따라 반사도가 감소하였다. 결과적으로 $450^{\circ}C$의 기판온도와 300W의 RF power에서 증착된 SiNx 박막의 경우 가장 우수한 전기적, 광학적 특성을 보여주었다.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.197-200
• /
• 2014

We investigated the influence of blistering on $Al_2O_3$/SiON stacks and $Al_2O_3$/SiNx:H stacks passivation layers. $Al_2O_3$ film provides outstanding Si surface passivation quality. $Al_2O_3$ film as the rear passivation layer of a p-type Si solar cell is usually stacked with a capping layer, such as $SiO_2$, SiNx, and SiON films. These capping layers protect the thin $Al_2O_3$ layer from an Al electrode during the annealing process. We compared $Al_2O_3$/SiON stacks and $Al_2O_3$/SiNx:H stacks through surface morphology and minority carrier lifetime after annealing processes at $450^{\circ}C$ and $850^{\circ}C$. As a result, the $Al_2O_3$/SiON stacks were observed to produce less blister phenomenon than $Al_2O_3$/SiNx:H stacks. This can be explained by the differences in the H species content. In the process of depositing SiNx film, the rich H species in $NH_3$ source are diffused to the $Al_2O_3$ film. On the other hand, less hydrogen diffusion occurs in SiON film as it contains less H species than SiNx film. This blister phenomenon leads to an increase insurface defect density. Consequently, the $Al_2O_3$/SiON stacks had a higher minority carrier lifetime than the $Al_2O_3$/SiNx:H stacks.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.130-131
• /
• 2006

차세대 반도체 정보기억장치로서 활발하게 연구되고 있는 나노 부유 게이트 메모리 (Nano Floating Gate Memory) 소자를 위해 필수적인 요소인 나노 크리스탈의 형성을 위하여 다양한 굴절률을 가진 실리콘 질화막 (SiNx)을 형성하고 고온 열처리 (rapid thermal annealing)를 실시하여 나노 크리스탈의 형성과 특성에 대한 연구를 진행하였다. 다양한 굴절률을 가진 실리콘 질화막을 형성한 후 나노 크리스탈의 형성을 위하여 열처리를 수행하였고, photoluminescence (PL)를 통하여 굴절률이 높은 Si-rich SiNx 박막의 고온 열처리를 수행한 실리콘 질화막으로부터 나노 크리스탈의 형성을 확인할 수 있었다. 또한 열처리한 실리콘 질화막 위에 Al을 증착하여 MIS 구조를 형성한 후 Capacitance-Voltage (C-V) 특성을 측정하였으며, $900^{\circ}C$에서 열처리한 박막에서 나노 크리스탈에 의한 메모리 효과를 확인할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.365-365
• /
• 2010

In this paper, silicon nitride thin films with different silane and ammonia gas ratios were deposited and characterized for the antireflection and passivation layer of high efficiency single crystalline silicon solar cells. As the flow rate of the ammonia gas increased, the refractive index decreased and the band gap increased. Consequently, the transmittance increased due to the higher band gap and the decrease of the defect states which existed for the 1.68 and 1.80 eV in the SiNx films. The reduction in the carrier lifetime of the SiNx films deposited by using a higher $NH_3/SiH_4$ flow ratio was caused by the increase of the interface traps and the defect states in/on the interface between the SiNx and the silicon wafer. The silicon and nitrogen rich films are not suitable for generating both higher carrier lifetimes and transmittance. These results indicate that the band gap and the defect states of the SiNx films should be carefully controlled in order to obtain the maximum efficiency for c-Si solar cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.729-732
• /
• 2006

The effect of stress match between silicon nitride ($SiN_2$) and hydrogenated amorphous silicon (a-Si:H) layers on the electrical characteristics of thin-film transistors (TFTs) has been investigated. The result shows that modifying the deposition conditions of a Si:H and $SiN_2$ thin films can reduce the stress mismatch at a-Si:H/SiNx interface. Moreover, for best a-Si:H TFT characteristics, the internal stress of gate $SiN_2$ layer with slightly nitrogen-rich should be matched with that of a-Si:H channel layer. The ON current, field-effect mobility, and stability of TFTs can be enhanced by controlling the stress match between a-Si:H and gate insulator. The improvement of these characteristics appears to be due to both the decrease of the interface state density between the a-Si:H and SiNx layer, and the good dielectric quality of the bottom nitride layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.174-175
• /
• 2012

(In, Ga) N-based III-nitride semiconductor materials have been viewed as the most promising materials for the applications of blue and green light emitting devices such as light-emitting diodes (LEDs) and laser diodes. Although the InGaN alloy can have wide range of visible wavelength by changing the In composition, it is very hard to grow high quality epilayers of In-rich InGaN because of the thermal instability as well as the large lattice and thermal mismatches. In order to avoid phase separation of InGaN, various kinds of structures of InGaN have been studied. If high-quality In-rich InGaN/GaN multiple quantum well (MQW) structures are available, it is expected to achieve highly efficient phosphor-free white LEDs. In this study, we proposed a novel InGaN double hetero-structure grown on GaN nano-pyramids to generate broad-band red-color emission with high quantum efficiency. In this work, we systematically studied the optical properties of the InGaN pyramid structures. The nano-sized hexagonal pyramid structures were grown on the n-type GaN template by metalorganic chemical vapor deposition. SiNx mask was formed on the n-type GaN template with uniformly patterned circle pattern by laser holography. GaN pyramid structures were selectively grown on the opening area of mask by lateral over-growth followed by growth of InGaN/GaN double hetero-structure. The bird's eye-view scanning electron microscope (SEM) image shows that uniform hexagonal pyramid structures are well arranged. We showed that the pyramid structures have high crystal quality and the thickness of InGaN is varied along the height of pyramids via transmission electron microscope. Because the InGaN/GaN double hetero-structure was grown on the nano-pyramid GaN and on the planar GaN, simultaneously, we investigated the comparative study of the optical properties. Photoluminescence (PL) spectra of nano-pyramid sample and planar sample measured at 10 K. Although the growth condition were exactly the same for two samples, the nano-pyramid sample have much lower energy emission centered at 615 nm, compared to 438 nm for planar sample. Moreover, nano-pyramid sample shows broad-band spectrum, which is originate from structural properties of nano-pyramid structure. To study thermal activation energy and potential fluctuation, we measured PL with changing temperature from 10 K to 300 K. We also measured PL with changing the excitation power from 48 ${\mu}W$ to 48 mW. We can discriminate the origin of the broad-band spectra from the defect-related yellow luminescence of GaN by carrying out PL excitation experiments. The nano-pyramid structure provided highly efficient broad-band red-color emission for the future applications of phosphor-free white LEDs.