• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1122-1127
• /
• 1998

Group II-AF_2$films such as $CaF_2$, $SrF_2$, and $BaF_2$ have been commonly used many practical applications such as silicon on insulatro(SOI), three-dimensional integrated circuits, buffer layers, and gate dielectrics in filed effect transistor. This paper presents electrical and structural properties of fluoride films as a gate dielectric layer. Conventional gate dielectric materials of TFTs like oxide group exhibited problems on high interface trap charge density($D_it$), and interface state incorporation with O-H bond created by mobile hydrogen and oxygen atoms. To overcome such problems in conventional gate insulators, we have investigated $CaF_2$ films on Si substrates. Fluoride films were deposited using a high vacuum evaporation method on the Si and glass substrate. $CaF_2$ films were preferentially grown in (200) plane direction at room temperature. We were able to achieve a minimum lattice mismatch of 0.74% between Si and $CaF_2$ films. Average roughness of $CaF_2$ films was decreased from 54.1 ${\AA}$ to 8.40 ${\AA}$ as temperature increased form RT and $300^{\circ}C$. Well fabricated MIM device showed breakdown electric field of 1.27 MV/cm and low leakage current of $10^{-10}$ A/$cm^2$. Interface trap charge density between $CaF_2$ film and Si substrate was as low as $1.8{\times}10^{11}cm^{-2}eV^{-1}$.

• 대한소아치과학회지
• /
• 제34권4호
• /
• pp.579-589
• /
• 2007

본 연구에서는 최근에 개발된 치과용 접착제를 대상으로 유치와 영구치의 법랑질과 상아질에 대한 결합력을 비교 평가하여 임상에서 상아질 접착제를 적절하게 선택하는데 도움을 주고자 시행하였다. 실험재료로 Adper Scotchbond Multi-purpose Plus Adhesive (SM; 3M ESPE, USA), Adper Single bond 2 (SB; 3M ESPE, USA), Clearfil SE Bond (SE; Kuraray Medical Inc., Japan), Adper Prompt L-Pop (PL; 3M ESPE, USA), G-Bond (GB; GC Cooperation Toyko, Japan)를 이용하여 전단결합강도를 평가하여 다음과 같은 결과를 얻었다. 1. 유치 법랑질에서 전단결합강도는 SM이 $28.47{\pm}7.93\;MPa$로 가장 높았고 SB ($28.18{\pm}6.84$), PL ($24.02{\pm}6.14$), SE ($21.70{\pm}6.56$), GB ($17.70{\pm}6.68$) 순이었다. SM과 SB는 SE보다 통계적으로 유의하게 높은 결합강도를 보였으며, SM, SB, PL은 GB보다 높았다(p<0.05). 2. 유치 상아질에서 전단결합강도는 SE가 $28.72{\pm}14.44MPa$로 가장 높았고, PL ($20.10{\pm}6.13$), SM ($17.72{\pm}10.65$), SB ($15.48{\pm}2.66$), GB ($10.10{\pm}5.45$) 순이었으며 SE와 GB간에는 유의한 차이가 있었으나, 다른 군들 간에는 유의한 차이가 없었다. 3. 영구치 법랑질에서의 전단결합강도는 SB가 $28.36{\pm}5.68\;MPa$로 가장 높았고 SM ($22.77{\pm}4.63$), PL ($22.05{\pm}6.57$), SE ($21.74{\pm}4.62$), GB ($15.60{\pm}6.75$)순이었다. SB는 다른 접착제보다 통계적으로 유의하게 높은 결합력을 나타냈으며, GB는 가장 낮은 결합력을 보였다(p<0.05). 4. 영구치 상아질에서의 전단결합강도는 SM이 $28.22{\pm}5.56\;MPa$로 가장 높았고, SB ($21.68{\pm}7.44$), SE ($20.13{\pm}9.88$), GB ($14.30{\pm}6.81$), PL ($14.18{\pm}5.88$)순이었으며, SM은 PL, GB와 유의한 차이가 있었다(p<0.05). 5. 유치의 법랑질과 상아질 간에는 SM, SB, GB에서 유의한 차이가 있었고, 영구치 법랑질과 상아질 간에는 PL에서 유의한 차이가 있었다(p<0.05). 6. 유치 법랑질과 영구치 법랑질 간에는 모든 접착제에서 유의한 차이가 없었으나, 유치 상아질과 영구치 상아질 간에는 SM과 SB에서 유의한 차이가 있었다(p<0.05).

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.19-19
• /
• 2002

Perovskite-type titanate dielectrics have attracted much attention in memory devices such as DRAMs or FeRAMs due to their high dielectric constants. However, low volatility of the Ba, Sr, Pb or Zr precursors with only thd ligands has limitations in obtaining high quality thin films by liquid source metal organic chemical vapor deposition (LS-MOCVD) processes. To improve the volatility of these precursors, many attempts have been made such as adding polyether ligands to satisfy the coordinative saturation. We report the synthesis of new precursors Ba(thd)₂(tmeea) and Sr(thd)₂(tmeea), where tmeea = tris[2-(2-methoxyethoxy)ethyl]amino, and LS-MOCVD of barium strontium titanate (BSTO) thin films using these precursors. Due to increased basicity of amines compared with ethers, it is expected that the nitrogen-donor ligand will make a strong bond to a metal than an analogous oxygen-donor ligand, consequently improving the volatility and thermal behavior of these precursors. Thin films of BSTO were grown on Pt(111)/SiO₂/Si(100) substrates by LS-MOCVD using a cocktail source consisting of the conventional Ti precursor Ti(thd)₂(O/sup i/Pr), and these new Ba and Sr precursors. As-grown films were characterized by XPS, SEM, XRD, XRF, and C-V and I-V measurements. BSTO films grown at 420℃ were stoichiometric barium strontium titanate with very smooth surface morphology and their dielectric constants were found to be as targe as 450. Dependence of the composition, microstructure and the electrical properties of the BSTO films on the growth temperature, annealing temperature, working pressure, and the composition of the cocktail source will be discussed.

• 대한소아치과학회지
• /
• 제38권1호
• /
• pp.33-41
• /
• 2011

본 연구의 목적은 상업용으로 시판되고 있는 수종의 치과용 접착제를 세대별로 분류하여 서로 다른 광원에 노출 시켜 중합하고 접착면의 전단 강도 측정을 통해 결합강도를 비교함으로써 간접적으로 광원에 따른 접착제의 중합 양상을 알아보고 소아치과 영역에서 가장 권장할만한 치과용 접착제와 광원 종류의 조합을 알아보고자 함이다. 본 연구에서는 최근에 개발된 치과용접착제를 대상으로 다른 유형의 광원으로 중합하였을 때 영구치 상아질에 대한 결합력 비교 평가하여 임상에서 상아질결합제와 광중합 시스템의 적절한 조합을 선택하는데 도움을 주고자 시행하였으며, 실험재료로 Adper Scotchbond Multi-purpose Plus Adhesive (SM; 3M ESPE, USA), Adper Single bond 2 (SB; 3M ESPE, USA), Clearfil SE Bond (SE; Kuraray Medical Inc., Japan), Adper Prompt L-Pop (PL; 3M ESPE, USA), GBond (GB; GC Cooperation Toyko, Japan)을 이용하여 Elipar Free light 2(LED; 3M ESPE, USA), OptiLux 501 (Halogen, Kerr, USA), Flipo (PAC, LOKKI, FRA) 세 가지의 광원으로 중합하고 전단결합강도를 평가한 뒤 다음과 같은 결과를 얻었다. 1. Freelight 2로 중합하였을 때 전단결합강도는 SM이 가장 높았으며($28.22{\pm}5.56$), SB($21.68{\pm}7.44$), SE($20.13{\pm}9.88$), PL($14.18{\pm}5.88$), GB($14.30{\pm}6.81$) 순이었다. SM은 PL, GB와 유의한 차이가 있었으나 (p<0.05), SB, SE, PL, GB 간에는 차이가 없었다. 2. Optiux 501로 중합하였을 때 전단결합강도는 SM이 가장 높았으며 ($22.06{\pm}7.95$), PL($12.94{\pm}4.96$), SB($12.80{\pm}3.35$), SE($12.43{\pm}4.79$), GB($10.00{\pm}3.47$) 순이었고, SM만 유의한 차이가 있었으나 (p<0.05), 다른 군 간에는 차이가 없었다. 3. Flipo로 중합하였을 때 전단결합강도는 SM이 가장 높았으며 ($26.82{\pm}11.16$), PL($15.42{\pm}9.35$), SB($10.96{\pm}3.74$), SE($9.39{\pm}3.74$), GB($7.85{\pm}2.22$) 순이었다. SM은 SB, SE, GB 군과 유의한 차이가 있었으나 (p<0.05), 다른 군 간에는 차이가 없었다. 4. 광원에 따른 차이는 SB와 GB에서만 유의성이 있었고, 다른 결합제에서는 유의한 차이가 없었다. 광원에 따른 유의성을 나타낸 결합제 중 SB는 Freelight 2가 다른 광원에 비해 유의한 차이를 보였고 OptiLux 501과 Flipo간의 차이가 없었던 반면, GB는 Freelight 2와 Flipo 간에만 유의한 차이를 나타냈다.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.465-474
• /
• 2023

The effects of La³⁺ substitution for Sr²⁺-site on the crystal structure and the dielectric properties of (Ba_0.7Sr_0.3-3x/2La_x) (Ti_0.9Zr_0.1)O₃ (BSLTZ) (0.005 ≤ x ≤ 0.02) ceramics were investigated. The structural characteristics of the BSLTZ ceramics were quantitatively evaluated using the Rietveld refinement method from X-ray diffraction (XRD) data. For the specimens sintered at 1,550 ℃ for 6 h, a single phase with a perovskite structure and homogeneous microstructure were observed for the entire range of compositions. With increasing La³⁺ substitution (x), the unit cell volume decreased because the ionic size of La³⁺ (1.36 Å) ions is smaller than that of Sr²⁺ (1.44 Å) ions. With increasing La³⁺ substitution (x), the tetragonal phase fraction increased due to the A-site cation size mismatch effect. Dielectric constant (ε_r) increased with the La³⁺ substitution (x) due to the increase in tetragonality (c/a) and the average B-site bond valence of the ABO₃ perovskite. The BSLTZ ceramics showed a higher dielectric loss due to the smaller grain size than that of (Ba_0.7Sr_0.3)(Ti_0.9Zr_0.1)O₃ ceramics. BSLTZ (x = 0.02) ceramics met the X7R specification proposed by the Electronic Industries Association (EIA).

• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.92-98
• /
• 2010

Ferritic stainless steels, which have relatively small thermal expansion coefficient and excellent corrosion resistance, are increasingly being used in vehicle manufacturing, in order to increase the lifetime of exhaust manifold parts. But, there are limits on use because of the problem related to cosmetic resistance, corrosions of condensation and high temperature salt etc. So, Aluminum-coated stainless steel instead of ferritic stainless steel are utilized in these parts due to the improved properties. In this investigation, Al-8wt% Si alloy coated 409L ferritic stainless steel was used as the base metal during Gas Tungsten Arc(GTA) welding. The effects of coated layer on the microstructure and hardness were investigated. Full penetration was obtained, when the welding current was higher than 90A and the welding speed was lower than 0.52m/min. Grain size was the largest in fusion zone and decreased from near HAZ to base metal. As welding speed increased, grain size of fusion zone decreased, and there was no big change in HAZ. Hardness had a peak value in the fusion zone and decreased from the bond line to the base metal. The highest hardness in the fusion zone resulted from the fine re-precipitation of the coarse TiN and Ti(C, N) existed in the base metal during melting and solidification process and the presence of fine $Al_2O_3$ and $SiO_2$ formed by the migration of the elements, Al and Si, from the melted coating layer into the fusion zone.

• 한국재료학회지
• /
• 제20권2호
• /
• pp.78-81
• /
• 2010

Surface modification of silica nanoparticles was investigated using an aerosol self assembly. Stearic acid was used as surface treating agent. A two-fluid jet nozzle was employed to generate an aerosol of the colloidal suspension, which contained 20 nm of silica nanoparticles, surface modifier, and ethyl alcohol. Powder properties such as morphology, specific surface area and pore size distribution were analyzed by SEM, BET and BJH methods, respectively. Surface properties of the silica power were analyzed by FT-IR. The OH bond of the $SiO_2$ surface was converted to a C-H bond. It was revealed that the hydrophilic surface changed to a hydrophobic one due to the aerosol self assembly. Morphology of the surface treated powder was nanostructured with lots of pores having an average diameter of around $2\;{\mu}m$. Depending on the stearic acid concentration (0.25 to 1.0 wt%), the pore size distribution of the particles and the degree of hydrophobicity ranged from 1.5 nm to 180 nm and 29.6% to 50.2%, respectively.

• 한국응용과학기술학회지
• /
• 제22권1호
• /
• pp.28-34
• /
• 2005

The structure of a carbon monoxide sorption complex of dehydrated fully $Ca^{2+}$-exchanged zeolite X, $|Ca_{46}(CO)_{27}|[Si_{100}Al_{92}O_{384}]$-FAU, has been determined in the cubic space group $Fd\;{\overline{3}}$ at $21^{\circ}C$ (a = 24.970(4) ) by single-crystal X-ray diffraction techniques. The crystal was prepared by ion exchange in a flowing stream of 0.05 M aqueous ${Ca(NO_3)_2}$ for three days, followed by dehydration at $400^{\circ}C$ and $2{\times}10^{-6}$ Torr for two days, and exposure to 100 Torr of zeolitically dry carbon monoxide gas at $21^{\circ}C$. The structure was determined in this atmosphere and was refined, using the 356 reflections for which $F_o$ > $4{\sigma}(F_o)$, to the final error indices $R_1$ = 0.059 and $wR_2$ = 0.087. In this structure, $Ca^{2+}$ ions occupy three crystallographic sites. Sixteen $Ca^{2+}$ ions fill the octahedral site I at the centers of hexagonal prisms (Ca-O = 2.415(7) ${\AA}$). The remaining 30 $Ca^{2+}$ ions are found at two nonequivalent sites II (in the supercages) with occupancies of 3 and 27 ions. Each of these $Ca^{2+}$ ions coordinates to three framework oxygens, either at 2.276(10) or 2.298(8) ${\AA}$, respectively. Twenty-seven carbon monoxide molecules have been sorbed per unit cell, three per supercage. Each coordinates to one of the latter 16 site-II $Ca^{2+}$ ions: C-Ca = 2.72(8) ${\AA}$. The imprecisely determined N-C bond length, 1.26(14) ${\AA}$, differs insignificantly from that in carbon monoxide(g), 1.13 ${\AA}$.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.436-440
• /
• 2009

본 연구에서는 초산화칼륨이 포함된 화학 폐를 이용하여 이산화탄소를 산소로 전환시켰다. 우선 초산화칼륨을 수산화칼슘과 혼합하여 초산화칼륨의 반응성을 낮추었다. 기제조한 수산화칼슘-초산화칼륨 혼합물을 수분제거에 용이한 실리콘 고분자 매트릭스에 여러 가지 비율로 분산시켜 화학 폐를 제조하였다. 일반적으로 화학 폐에 있는 초산화칼륨의 양이 많아질수록 변환되는 이산화탄소와 발생되는 산소의 양이 증가하였다. 후리에 적외선 분광기 분석결과 화학 폐에 분산되어 있는 규소-산소의 단일결합이 $1,050cm^{-1}$에서 나타났다. 규소-산소 단일결합의 흡수도는 화학 폐에 있는 규소고분자의 함량이 높을수록 높았다. 본 실험결과는 이산화황이나 이산화질소같은 산성 가스의 전환에도 이용될 수 있음을 보여준다.

• 폴리머
• /
• 제33권4호
• /
• pp.319-325
• /
• 2009

편광필름용 점착제를 합성하기 위해 아크릴 단량체를 사용하여 용액중합이 수행되었다. 사용된 아크릴 단량체는 2-ethylhexylacrylate, butylacrylate, acrylic acid였으며, 비율은 점착제의 유리전이온도 $-40^{\circ}C$에 맞추어 2-ethylhexylacrylate: butylacrylate: acrylic acid=25:50:3.5로 하였다. 중합된 점착제에 커플링제를 1 wt% 첨가하였을 때 점착제의 광투과율이 매우 증가하였다. 이러한 현상은 커플링제의 Si-O 결합이 액정셀에 대한 점착력을 향상시킨 결과임을 알 수 있었다. 가교제를 단량체 대비 0.5, 1.0, 1.5 wt% 첨가하였을 매 가교제의 함량이 증가할수록 초기점착력은 감소하고 응집력은 증가하였다. 접촉각 분석에서 가교제의 함량이 증가할수록 표면에너지가 커져 접촉각이 감소하였다. 내열성 측정에서 가교제의 증가나 온도변화에 관계없이 아크릴 점착제는 우수한 내열성을 보였으며 절단면의 관찰에서 가교제의 함량이 증가할수록 절단면이 매끄럽고 깨끗하였다. 종합적으로 점착제의 초기점착력, 응집력, 표면에너지, 절단면의 상태 등을 고려하여 적정 가교제의 투입량을 1.0 wt%로 확정하였다.