• Journal of Korean Society of Water and Wastewater
• /
• v.9 no.3
• /
• pp.108-115
• /
• 1995

The feasibility study of using converter slag as a solidifying agent of digested sewage sludge cake has been performed. The availability of converter slag as solidifying agent has been investigated by several trial tests. Based on the trial test results, the optimum mixing ratios of sludge cake and solidification additive are estabilished. Finally the solidification characters of sludge cake are elucidated by SEM and EDS. It is ascertained that converter slag with a small amount of quicklime enhences the solidification. From the result of pH test, overall pH of specimens tends to decrease slowly with curing time. After solidifying specimens had been cured for 7 days, these are water-cured for 24 hours. The weight and strength of all the specimens are nearly the same regardless of the mixed ratios of solidifying agent. The result of leaching tests for four heavy metal ions, Cd, $Cr^{6+}$, Pb and Cu show that the leaching strength becomes below the decision criteria of the specific wastes, respectively. The SEM observation of the delicate structure shows that needlelike crystals appear after solidification which are not observed before. From the EDS analysis, it is found that the main ingredients of needlelike crystals are Ca, Si, Al and O.

• Journal of the Korea Concrete Institute
• /
• v.19 no.6
• /
• pp.667-676
• /
• 2007

As the 21st century began, cement and concrete that are representatives of modem building materials became a major factor in global warming, air pollution and environmental pollution. Also, the problems that are generated while pursuing high performance and high strength became social issues. Therefore, it has become urgent to prepare counter plans. This study has aimed at the recycling of sewage sludge ash and developing it as a new concept in building material which serves the environmental considerations for long-lasting developmental purpose. Also, the study aimed to find a substitute for scarce natural resources and to secure high techniques for waste recycling. The purpose of this study was also to solve fundamentally secondary environmental pollution. The results revealed that the chemical components of sewage sludge ash are mainly $SiO_2\;and\;Al_2O_3$ which are similar to the components of pozzolan. Also, it was identified that sewage sludge ash can be utilized as a hardened specimen with an alkali activated pozzolan reaction. Considering the possibility of appropriate strength development and the advantage of drying shrinkage, compared with that of cement, it was believed that sewage sludge ash can demonstrate a function as a substitute for cement given.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.12-19
• /
• 1995

This study was carried out to remove the iron and impurities usmg hydrocyclone and HGMS for recycling of sludge from the granite stone cutting and polishing industrγ in the basic of chemi떠1 analysis and minerallogical investigation. This sludge consist of 70.9% $SiO_2$ 13.6% $Al_2O_3$ and It also contained 2.52% of $Fe_2O_7$ and 0.29% of $TiO_2$, as a main impurities to decrease the whiteness. As the result of hydrocyclone experiment, It was very good condition that are 100~150 g/l of sludge amount, 2.0~ 2.5 mm of underflow nozzle size, and 1.2~1.6 kg/$\textrm{cm}^2$ of pressure for 85% sludge product with the $-37{\mu}\textrm{m}$ size. $Fe_2O_3$ and $TiO_2$, contents by treatment of HGMS were decreased with 0.65% and 0.07% each at 10,000 gauss of magnetic field strength, and addih$\upsilon$n of Sodium tripolyphosphate as a dispersant was effected to get low grade F Fe,Ol and TiO, concentrate. PhYSIcal properties of this stone sludge product were showed 58.5% of whiteness, 1 13.4% of firing shrinkage and 3.0812 $\textrm{m}^2$/g of specific surface area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.327-333
• /
• 1995

The sludge application increased the panicle number per plant and number of spikelets per panicle, resulting in an increase in yield by 10% at Cheongdo, 15% at Chinju and 7% at Yeocheon. With the sludge application (3% w/w), $SiO_2$ content of brown rice was significantly increased. The sludge aplied up to 34.8 ton per hectare increased pH, calcium, and potassium in paddy soils, the application of the sludge to reclaimed saline soil at Yeocheon needs to be reevaluated since the sludge increased soil pH to 7.2 and aggravated drainage.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.687-693
• /
• 2006

The Stone Powder Sludge(below SPS) is the by-product from the process that translates stone power of 8mm under as crushed fine aggregate. It is the sludge as like cake that has average particle size of $7{\mu}m$, absorbing water content of 20 to 60%, and $SiO_2$ content of 60% over. Because of high water content of SPS, it is not only difficult to handle, transport, and recycle, but also makes worse the economical efficiency due to high energy consuming to drying. This study is aim to recycle SPS as it is without drying. Target product is the lightweight foamed concrete that is made from the slurry mixed with pulverized mineral compounds and foams through hydro-thermal reaction of CaO and $SiO_2$. Although in the commercial lightweight foamed concrete CaO source is the cement and $SiO_2$ source is high purity silica powder with $SiO_2$ of 90%, we tried to use the SPS as $SiO_2$ source. From the experiments with factors such as foam addition rate and replacement proportion of SPS, we find that the lightweight foamed concrete with SPS shows the same trends as the density and strength of lightweight foamed concrete increases according to decrease of foam addition rate. But in the same condition, the lightweight foamed concrete with SPS is superior strength and density to that with high purity silica. This trends is distinguished according to increase of replacement proportion of SPS, also the analysis of XRF shows that the hydro thermal reaction translates SPS to tobermorite. Although SPS has low $SiO_2$ contents, the lightweight foamed concrete with SPS has superior strength and density, because it reacts well with CaO due to extremely fine particles. We conclude that it is possible to replace the high purity silica as SPS in the lightweight foamed concrete experimentally.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.667-675
• /
• 2020

An Alum-sludge based adsorbent (ASBA) was synthesized by the hydrothermal treatment of alum sludge obtained from settling basin in water treatment plant. ASBA was applied to remove fluoride and arsenic in artificially-contaminated aqueous solutions and mine drainage. The mineralogical crystal structure, composition, and specific surface area of ASBA were identified. The result revealed that ASBA has irregular pores and a specific surface area of 87.25 ㎡ g-1 on its surface, which is advantageous for quick and facile adsorption. The main mineral components of the adsorbent were found to be quartz(SiO2), montmorillonite((Al,Mg)2Si4O10(OH)2·4H2O) and albite(NaAlSi3O8). The effects of pH, reaction time, initial concentration, and temperature on removal of fluoride and arsenic were examined. The results of the experiments showed that, the adsorbed amount of fluoride and arsenic gradually decreased with increasing pH. Based on the results of kinetic and isotherm experiments, the maximum adsorption capacity of fluoride and arsenic were 7.6 and 5.6 mg g-1, respectively. Developed models of fluoride and arsenic were suitable for the Langmuir and Freundlich models. Moreover, As for fluoride and arsenic, the increase rate of adsorption concentration decreased after 8 and 12 hr, respectively, after the start of the reaction. Also, the thermodynamic data showed that the amount of fluoride and arsenic adsorbed onto ASBA increased with increasing temperature from 25℃ to 35℃, indicating that the adsorption was endothermic and non-spontaneous reaction. As a result of regeneration experiments, ASBA can be regenerated by 1N of NaOH. In the actual mine drainage experiment, it was found that it has relatively high removal rates of 77% and 69%. The experimental results show ASBA is effective as an adsorbent for removal fluoride and arsenic from mine drainage, which has a small flow rate and acid/neutral pH environment.

• Resources Recycling
• /
• v.21 no.4
• /
• pp.35-43
• /
• 2012

This study was carried out for the purpose of obtaining basic data to utilize the AMD sludge as sorbent for heavy metal ions. The sludge from the treatment process of Acid Mine Drainage mainly consists of fine iron hydroxide or iron oxide hydrate and calcite, and the fine iron hydroxide or iron oxide hydrate has a property of adsorbing heavy metal ions. In this study, we investigated the physical property of the AMD sludge like as mineral composition, particle size and shape and chemical composition and also investigated the influence of dosage of sludge, adsorbing time, pH, initial concentration and sintering temperature on the adsorption of heavy metal ions.

• Korean Journal of Environmental Agriculture
• /
• v.4 no.2
• /
• pp.78-87
• /
• 1985

To investigate the effects of paper sludge, by-products of paper manufactory, on the chemical properties of paddy soil and growth of paddy rice, paper sludges were applied to the pots at the rates of 300, 600, 900 and 1,200㎏/l0a which were either pread-justed C/N ratio to 30 : 1 or not adjusted. The effects were compared with those of control. Seasonal variations of various forms of soil organic nitrogen, the mineralization of organic nitrogen and the contents of soil minerals were analyzed. The results were summarized as follows: 1) The contents of soil organic nitrogen, especially amino sugar-N and amino acid-N, organic matter, CEC and available $SiO_2$ were increased by application of paper sludge compared with that of control. 2) The mineralizations of organic nitrogen after 6 weeks of incubation at $30^{\circ}C$ were 12. 2, 12.6, 15.1, 9.7 and $15.2^{\circ}C$ in the control, 300㎏/l0a sludge treatment, 300㎏/l0a sludge treatment(C/N ratio adjusted), 600㎏/l0a sludge treatment and 600㎏/l0a sludge treatment(C/N ratio adjusted), respectively. 3) Cu and Pb contents in the soil were in the range of $0{\sim}0.2100$ and $0{\sim}0.0013$ ppm, respectively. Cr and Cu in the soil were not detected at all. There were no differences in the contents of all the heavy metals among all the treatments in the soil.

• Environmental Engineering Research
• /
• v.18 no.4
• /
• pp.267-276
• /
• 2013

This study presents a comparison of different protocols for the synthesis of iron-loaded zeolites, and the results of their application, as well as that of zeolite-A (Z-A), to the removal of ammonium and phosphate from aqueous media. Zeolites prepared by three methods were evaluated: iron-incorporated zeolites (IIZ), iron-exchanged zeolites (IEZ), and iron-calcined zeolites (ICZ). The optimal iron content for preparing of IIZ, as determined via scanning electron microscopy and X-ray photoelectron spectroscopy analyses, expressed as molar ratio of $SiO_2:Al_2O_3:Fe$, was below 0.05. Ammonia removal revealed that the iron-loaded zeolites have a higher removal capacity than that of Z-A due, not only to ion-exchange phenomena, but also via adsorption. Greater phosphate removal was achieved with IEZ than with ICZ; additionally, no sludge production was observed in this heterogeneous reaction, even though the coagulation process is generally accompanied by the production of a large amount of undesired chemical sludge. This study demonstrates that the developed synthetic iron-loaded zeolites can be applied as a heterogeneous nutrient-removal materials with no sludge production.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.50-57
• /
• 1985

An attempt was made to determine the optimum levels of sewage sludge application for seogwangbyeo in the farmer's field. 1. Optimum amount of sewage slude application was 338kg/11a at the fertilizer (N-P-K) level of 15-10-10kg/10a, 430kg/10a at that of 7.5-10-10kg/10a and 544kg/10a at no fertilizer. 2. Number of tillers during all growing period were increased with amounts of sewage sludge and/or chemical fertilizers. 3. Panicles per hill was increased but percent ripeness was decreased with the application of increasing level of sewage sludge and/or chemical fertilizer. In particular, the decrease of ripeness among yield-related components sotood out as an important one to be solved for higher yield. 3. Panicles per hill was increased but percent ripeness was decreased with the application of increasing level of sewage sludge and/or chemical fertilizer. In particular, the decrease of ripeness among yield-related components stood out as an important one to be solved for higher yield. 4. Ripeness was remarkably decreased in high nitrogen content of soil and rice plant under heavy amounts of sewage sludge and/or chemical fertilizer. 5. Ripeness that had direct effect on yield showed significantly possitive correlation with the content of $SiO_2$ and $SiO_2/N$ in rice plant from 25 days after transolanting to harvesting stage. 6. Maximumutillzation of nitrogen and its production efficiency of absorbed nitrogen in sewage sludge were 16.6% and 31.9kg (Yield/kg, N) at the level 15-10-10kg/10a as fertilizer with amounts of sewage sludge application, and 19.0% and 31.8kg (yield/kg, N) at sewage sludge application without fertilizer.