• 한국세라믹학회지
• /
• 제38권9호
• /
• pp.794-798
• /
• 2001

Sol-gel법에 의하여 $Y_{2-x}SiO_5:Ce_x^{3+}$ (x=0.002∼0.04) 형광체를 제조하고 발광특성을 평가하였다. 800$^{\circ}$C에서 하소하였을 때는 무정형의 결정상이 나타났지만 1000$^{\circ}$C 이상에서는 $X_2$ type의 $Y_2SiO_5$ 결정상을 얻었다. 230∼360nm에서 형광체 모체의 광흡수가 일어났으며 300∼400nm에서 Ce 첨가로 인한 형광체의 광흡수가 관찰되었다. 436nm에서 최대의 발광 spectrum을 나타내었으며 $Ce^{3+}$ 함량을 0.025mol 첨가 시 $Y_{2-x}SiO_5:Ce_x^{3+}$ 형광체는 최대의 cathodoluminescence 특성과 CIE1931색 좌표 상에서 x=0.161, y=0.124의 색을 나타내었다.

• 대한화학회지
• /
• 제44권1호
• /
• pp.60-67
• /
• 2000

표면공명흡수는 매질의 유전상수값에 의존한다. 금 나노미립자가 함침된 $TiO_2/SiO_2$ 복합산화물 박막을 $Ti(OPr^i)_4$과 $Si(OEt)_4$, 그리고 $HAuCl_4{\cdot}7H_2O$를 사용하여 졸-겔 방법으로 제조하였다. $TiO_2/SiO_2$ 박막에 함침된 금 나노미립자의 최대 표면 공명 흡수는 $TiO_2/SiO_2$의 몰비에 따라 540 nm에서 615 nm 까지 선형적으로 변하였다. 이러한 박막에 함침된 금 나노미립자의 크기와 구조를 TEM과 XRD로 측정하였다. 그리고 $TiO_2/SiO_2$ 박막의 유전상수값을 실험 data로부터 이론적으로 계산하였다

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.854-860
• /
• 1997

The tribological property of ceramics is very important for use in seal rings, pump parts, thread guides and mechanical seal, etc. In the present study, which RBSC/graphite composites were manufactured by adding graphite powders with different particle sizes to mixtures of SiC powder, metallic silicon, carbon black and alumina, effects on the tribological property of each RBSC/graphite composite was investigated in accordance with the particle size of the added graphite powder. The water absorption, the bending strength and the resistance for the friction and wear were measured, and the crystalline phase and the microstructure were respectively examined by using XRD and SEM. In case that the particle size of the graphite powder was fine(2${\mu}{\textrm}{m}$), the formation of $\beta$-SiC was accelerated, thereby making the increase of the bending strength and the decrease of the water absorption, but no improvement for the tribological properties. Furthermore, in case that the particle size of the graphite powder was some large(88~149${\mu}{\textrm}{m}$), the formation of $\beta$-SiC was not accelerated, to thereby make the decrease of the bending strength and the increase of the water absorption, but the improvement for the tribological property of only the composite having the graphite powder of 20 vol%. In addition, in case that the particle size distribution of the graphite powder was large (under 53 ${\mu}{\textrm}{m}$), there was no improvement for every properties. However, the composites, which the graphite powder with the particle size of 53~88 ${\mu}{\textrm}{m}$ was added in 10~15 vol%, had the most increased resistance for the friction and wear which show the worn out amount of 0.4~0.6$\times$10-3 $\textrm{cm}^2$, and the value of the bending strength is 380~520 kg/$\textrm{cm}^2$.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.81-88
• /
• 2021

Rice Husk Ash (RHA) geopolymer paste activated by sodium aluminate were characterized by X-ray diffractogram (XRD), scanning electron microscope (SEM), energy dispersion X-Ray analysis (EDAX)and fourier transform infrared spectroscopy (FTIR). Five series of RHA geopolymer specimens were prepared by varying the Si/Al ratio as 1.5, 2.0, 2.5, 3.0 and 3.5. The paper focuses on the correlation of microstructure with hardened state parameters like bulk density, apparent porosity, sorptivity, water absorption and compressive strength. XRD analysis peaks indicates quartz, cristobalite and gibbsite for raw RHA and new peaks corresponding to Zeolite A in geopolymer specimens. In general, SEM micrographs show interconnected pores and loosely packed geopolymer matrix except for specimens made with Si/Al of 2.0 which exhibited comparatively better matrix. Incorporation of Al from sodium aluminate were confirmed with the stretching and bending vibration of Si-O-Si and O-Si-O observations from the FTIR analysis of geopolymer specimen. The dense microstructure of SA2.0 correlate into better performance in terms of 28 days maximum compressive strength of 16.96 MPa and minimum for porosity, absorption and sorptivity among the specimens. However, due to the higher water demand to make the paste workable, the value of porosity, absorption and sorptivity were reportedly higher as compared with other geopolymer systems. Correlation regression equations were proposed to validate the interrelation between physical parameters and mechanical strength. RHA geopolymer shows comparatively lower compressive strength as compared to Fly ash geopolymer.

• Journal of the Optical Society of Korea
• /
• 제11권1호
• /
• pp.34-39
• /
• 2007

Laser-induced breakdown of colloidal suspensions, such as polystyrene, $ZrO_2$, and $SiO_2$ particles in diameters of 100-400 nm in water is investigated by nanosecond flash-pumped Nd:YAG laser pulses operating at a wavelength ${\lambda}$= 532 nm. The breakdown threshold intensity is examined in terms of breakdown probability as a function of laser pulse energy. The threshold intensity for $SiO_2$ particles ($1.27{\times}10^{11}\;W/cm^2$) with a size of 100 nm is higher than those for polystyrene and $ZrO_2$ particles with the same size, namely $5.7{\times}10^{10}$ and $5.5{\times}10^{10}\;W/cm^2$, respectively. Results indicate that the absorption of five photons is required to induce ionization of $SiO_2$ particles, whereas the other particles necessitate four-photon absorption. These breakdown thresholds are compared with those measured by nanosecond pulses from a diode-pumped Nd:YAG laser having a different focusing geometry.

• 천문학회보
• /
• 제41권1호
• /
• pp.38.1-38.1
• /
• 2016

Gamma ray burst, the most brightest explosion phenomena in the current universe is well suited for study of high redshift universe. We report the afterglow multi-wavelength observation and GTC spectroscopy follow up of GRB 140304A which was exploded at z=5.283. The spectrum was shown damped Lyman alpha features and a series of absorption lines S, Si, SiII*, Oi, CII, CII*, SiIV are clearly detected at common redshift. Clear optical flares are detected when X-ray flare happened and a possible gamma-ray excess also. At this conference, we report on implications for the GRB host and environments using its absorption features which place the results in context to other well studied high redshift GRBs and studies about the ejecta using its observed flaring activities.

• 전자공학회논문지D
• /
• 제35D권8호
• /
• pp.44-52
• /
• 1998

The theoretical modeling of transition energy and absorption coefficient for intersubband transitions in quantum wells in presented. We include, as well as hartree and exchange-correlation potentials, boht depolarization effect and exciton-like effect which play great roles in heavily doped cases where practically reasonable absorption coefficients are available. Also, the calculated results are compared with the existing experimental values for .delta.-doped Si quantum wells to check the validity of our theoretical calculation.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.116-117
• /
• 2009

In this study, As a previous stage to manufacture disposable tent for military camouflage, we examine possibility of inorganic material absorption on PET surface. In order to, we created unevenness by sputtering process on PET surface and made absorption with Zirconium (ZIA) that has nano particles. and we went on study to its effect.

• 한국분말재료학회지
• /
• 제16권6호
• /
• pp.424-430
• /
• 2009

Electromagnetic wave energies are consumed in the form of thermal energy, which is mainly caused by magnetic loss, dielectric loss and conductive loss. In this study, CNT was added to the nanocrystalline soft magnetic materials inducing a high magnetic loss, in order to improve the dielectric loss of the EM wave absorption sheet. Generally, the aspect ratio and the dispersion state of CNT can be changed by the pre-ball milling process, which affects the absorbing properties. After the various ball-milling processes, 1wt% of CNTs were mixed with the nanocrystalline $Fe_{73}Si_{16}B_7Nb_{3}Cu_1$ base powder, and then further processed to make EM absorption sheets. As a result, the addition of CNT to Fe-based nanocrystalline materials improved the absorption properties. However, the increase of ball-milling time for more than 1h was not desirable for the powder mixture, because the ballmilling caused the shortening of CNT length and the agglomeration of the CNT flakes.

• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.390-396
• /
• 2009

The present research was focused to investigate the quality of non-polar SiC substrates grown by a conventional PVT method for optoelectronic applications. The half part of the PVT-grown 6H-SiC crystal boules was sliced along a-direction and m-direction to extensively analyze non-polar planes and then remaining part of that was sliced along the basal plane to produce wafers. The non-polar SiC m-plane and a-plane exhibited apparent peaks around 2 theta=$120^{\circ}$((3-300) plane) and 2 theta=$60^{\circ}$ ((11-20) plane), respectively. FWHM values of m-plane measured along a-direction and c-direction were 60 arc see and 57 arcsec respectively, a-plane measured along m-direction and c-direction were 41 arcsec and 51 arcsec respectively. The typical absorption spectra of SiC crystals indicated that each of SiC crystals were the 6H-SiC with fundamental absorption energy of about 3.04 eV. Non-polar planes contained no micropipe on etched surface. The carrier concentration and mobility of non-polar SiC wafers have estimated by Raman spectrum. It was observed that the carrier mobility is low in the area far from seed crystal with compared to other places.