• Journal of Ship and Ocean Technology
• /
• v.10 no.1
• /
• pp.27-37
• /
• 2006

Current loads acting on offshore vessels are important for predicting the hydrodynamic and structural responses of the vessels. It is also true for analyzing the behavior of moored systems under the action of ocean current. Unfortunately there are few standardized current load coefficients for offshore vessels and it is extremely difficult to be applied to arbitrary hull shapes, if any. Therefore current load coefficients for three hull shapes are calculated in this study using a CFD code, which is well known in the shipbuilding industry. In order to validate the present approach, a typical VLCC is taken as numerical example and resulting current coefficients are compared with experiment together with the OCIMF data. The comparison shows a good agreement in the qualitative sense. Two additional models considered herein are a shuttle tanker and a FPSO under deepwater condition $(WD/T{\geq}6)$. The present numerical approach may be utilized for practical design of offshore vessels.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.33-43
• /
• 2001

The design and construction of special purpose vessels such as drillship and shuttle tankers have been increased. These vessels install the DPS(dynamic positioning systems) to maintain the position and heading for long-time operation. This paper deals with the experimental method for model-based DP system and the control theory and filter algorithms. In this experiment, the length of model ship is 4 meters and it has three thrusters to maintain the position. The ability of tracking along the given course and keeping of heading in waves are confirmed. For the calculation of thruster input the PID control theory are adopted and the effects of PID gain were investigated. To estimate the low frequency motions Kalman filter and digital filter were used and their effects were investigated.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.3-7
• /
• 2010

국내 조선소와 학교, 연구소에서 1990년대 중반 이전의 빙해선박에 대한 연구는 거의 이루어지지 않았다고 해도 과언이 아니다. 하지만 2000년대 초반부터 러시아가 St. Petersburg항을 통해 본격적으로 원유를 수출하기 시작하면서 내빙선 시장이 호황을 맞이하게 되었고 빙해선박 특히 내빙선박에 대한 관심이 집중되었다. 당시에 한국의 조선소들은 FMA rule 상의 엔진 출력이 과도한 것을 인지하고, 적정한 엔진 사양을 파악하기 위한 공격적인 연구개발로 ICE Class 1A, 1B, 1C의 선박을 상당히 많이 수주하여 선주에게 인도하였다. 또한 Ice belt의 구조적인 보강을 하기위한 설계와 연구가 활발히 진행되었다. 내빙선에 이어 쇄빙선의 연구에 관심을 집중시킨 선박은 최근 실해역에서 활동 중인 연구 조사선 "아라온"호 이다. 아라온호는 설계와 건조가 국내 조선소에서 이루어졌으며, 학계와 조선소 및 연구소에 쇄빙선에 대한 관심을 불러 일으켰다. 이와 비슷한 시기에 삼성 중공업에서 세계 최대 쇄빙선인 70K shuttle tanker를 수주 및 인도하면서 대형 쇄빙선 시장이 개척되어 국내외 조선소의 큰 관심을 불러일으키고 있다. 쇄빙 기술이 응용된 선박으로 Drill ship과 LNG FPSO등이 수주되어 현재 설계를 진행 중이다. 가장 최근에 현대중공업에서 수주한 원통형 FPSO의 경우 북해 지역에 투입을 목적으로 언론에 발표된 것과는 달리 발주처와 유럽의 관련 연구기관에서는 러시아 유전지역 투입을 염두에 두고 쇄빙관련 연구를 진행한 것으로 파악되고 있다. 본 기고에서는 이러한 빙해선박의 개발 및 건조 사례 현황을 기술하고, 향후 수주가능성이 있는 쇄빙선 분야와 조선소의 대응 전략 등에 대해서 정리해 보고자 한다.

• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.187-206
• /
• 2019

After reviewing the concept and previous studies related to green ports, this study analyzes the implications of green port policy of advanced ports in foreign countries and analyzes problems in terms of environmentally-friendly green port policy for Ulsan port, and to present sustainable green logistics establishment measures. The literature survey and Benchmarking methods are adopted as research methodology and the results are as follows. First, the pan-government climate change response management system, legislation of relevant laws, implementation of fiscal support policies, and roadmaps should be established. Second, the foundation for eco-friendly green growth should be established through the discovery of business models in conjunction with leading industries in the Southeastern Metropolitan Economic Area. Third, the Ulsan Port Greenport, such as AMP, in-port LNG propulsion ship, and ESI vessel incentive, should be built. Fourth, a low-carbon, high-efficiency sea-shuttle service shall be established through the introduction of the sea-shuttle service along the sea route. Fifth, energy self-reliant ports, including all institutions in the metropolitan Ulsan port area that have exceeded the level of Ulsan port Authority, should be built. Finally, water-type ports need to be built through the creation of coastal forests, the purification of marine water quality, and the introduction of colors to port.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.5
• /
• pp.411-422
• /
• 2014

A helideck is a very valuable offshore structure for the take-off and landing of a helicopter. In order to design a helideck, the design parameters and various loads defined by the regulations related to the design of a helideck should be applied. In this study, a risk analysis was performed based on the helicopter accidents for seven years, and the frequency and possible reasons for accidents involving helidecks were investigated. In addition, a finite element analysis of a steel helideck mounted on the upper deck of a ship (shuttle tanker) was performed with the load that should be considered when designing a helideck. Based on the results, a parametric study of helideck was carried out by applying a variety of design parameters, and an improved helideck design was presented. This improved helideck reduced the steel used by up to 24% compared to the initial helideck design, and the results of a finite element analysis were analyzed and compared with those of the initial analysis.

• Korea Trade Review
• /
• v.45 no.5
• /
• pp.141-159
• /
• 2020

Container terminals at Gwangyang Port are operated by three container operators: A, B and C. Ultimately, there is consensus that a single operator should operate all terminals so that economies of scale can be achieved even in the operation of the container terminal. Integration between operators has a positive effect on both operators and shipping companies. From the operator's point of view, overlapping fixed costs between operators can be unified, reducing overall costs and utilizing spare facilities. On the other hand, from the viewpoint of the shipping company, it is possible to ensure stable use of the port facilities and always allow berthing, reduce days on demurrage and ship waiting, and provide one-stop service for work. However, existing cases of operators' integration or relocation of terminals remained to estimate the expected effects of alternatives, emphasizing only the financial point of view. The port terminal is a large system, and it is important to consider that it is an aggregate of major logistics facilities and equipment. Moreover, if the estimation can be made by quantifying the expected effect, the justification of the terminals' relocation can be further emphasized. Therefore, it is very important to estimate the expected effect from the viewpoint of systemic operation. Moreover, the need for operators' integration can be further emphasized if it can be estimated through quantification of expected effects. Currently, three alternatives are considered as alternatives to the terminals' relocation, and in this study, the optimal plan was derived for the 3 alternatives by the linear planning model of the minimum shuttle transportation cost in the terminal. The optimal plan is alternative 2, which shows the most advantageous integration effect in terms of expected effects. Alternative 2 integrates the B terminal into the C terminal, and the A terminal operates independently as it is.