• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.129-140
• /
• 2022

The purpose of this study to improve the shoulder wheel that is used frequently during shoulder circumduction exercise in a park, to link the shoulder wheel to a game application comprising various shoulder circumduction exercise and shoulder ROM exercise, and to enjoy the game during the exercises. A step motor was added to the shoulder wheel, and the rotating speed and rotating angle, and rotating direction can be controlled. The shoulder height, different for different people, can be controlled as well, so that any user can use this device. The developed application content includes the game elements, to enjoy the repetitive and boring exercise with fun and interest, and the control to adjust the degree of difficulty. This was to help users heighten their desire to rehabilitate by inducing active participation during repetitive shoulder rehabilitation exercise because the game vests users with intrinsic motivation and immersion. If the shoulder wheel and application contents proposed in this study are used, shoulder diseases can be prevented in advance by performing muscle strengthening exercises required in an aging society. This study is expected to contribute to the field of research related to serious games and rehabilitation.

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.429-436
• /
• 2010

The purpose of this study was to analyze the kinematic factors and throwing variables for the 3-turn and 4-turn techniques and for release as well as to provide technical advice for improving athletic performance in hammer throwing. Data analysis led to the following conclusions: To increase the rotation speed for the 3-turn and 4-turn techniques, the time elapsed during the 1-foot support period should be decreased the distance between the rotating foot and the rotation axis should be small and the height of the hip joint should be increased at the times of release The throwing angle at the moment of release should be more than 40 degrees, and the throwing position should be taken vertically high at the shoulder joints. To accelerate the motion of the hammer, the speed should not be reduced during the 1-foot support period but should be increased during the 2-foot support period for much greater acceleration. In the 3-turn technique, the angles of the shoulder axis and hummer string should be dragged angle at the maximum point and lead angle at the minimum point, and dragged angle at the maximum and minimum points in the 4-turn at the time of relase The upper body should be quickly bent backward, the knee angle should be extended, and the angles of the shoulder axis and hammer string should be dragged angle close to 90 degrees.

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.487-495
• /
• 2010

The purpose of this study was conducted to make a comparative biomechanical analysis of X-factor and X-factor stretch during driver and iron swing. The subjects were composed of 10 professional golfers with more than 10 years career. The result was as follows: First, the analysis of the back swing with driver and iron swing showed no differences statistically between both the timing in horizontal rotating of shoulder and hip, the time required for X-factor stretch also showed no differences statistically. Second, the back swing with a driver swing showed more maximum horizontal rotation of shoulder and hip joint than the back swing with an iron swing, but the twist of shoulder and hip that was X-factor stretch angle showed no difference. Third, the GRF of the max value for the left and right foot during shoulder and hip horizontal rotation of back swing showed no differences statistically in the movement of driver and iron swing during the back swing, and the GRF of X-factor stretch for the left and right foot showed no differences statistically in driver and iron swing. Therefore the result of this research showed that the operation of torso(X-factor stretch) and weight shifting were similar although the horizontal rotation of body was different during the driver and iron swing.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.104-111
• /
• 2009

This paper shows the behaviors of macro- and micro-structures and mechanical properties for specimen's welding region welded by FSW. according to welding conditions with 5mm thickness aluminum 5083O alloy plate. It apparently results in defect-free weld zone in case traverse speed was changed to 32 mm/min under conditions of anti-clockwise direction and tool rotation speed such as 800 and 1250 rpm with tool's pin diameter of 5 ${\Phi}mm$ and shoulder diameter of 20 ${\Phi}mm$, pin length of 4.5 mm and tilting angle of $2^{\circ}$. The ultimate stress of ${\sigma}_T=331$ MPa and the yield point of 147 MPa are obtained at the condition of the travel speed of 32 mm/min with the tool rotation speed of 1250 rpm. There is neither voids nor cracks on bended surface of $180^{\circ}$ after bending test. The improvement of toughness after impact test was found. The lower rotating and traverse speed became, the higher were yield point, maximum stress and elongation(%) with the stresses and the elongation(%) versus the traverse speed diagram. Vickers hardness for cross section of welding zone were also presented. The typical macro-structures such as dynamically recrystallized zone, thermo-mechanically affected zone and heat affected zone and the micro-structures of the transverse cross-section were also showed. However, the author found out that the region of 6mm far away from shoulder circumference was affected by friction heat comprehensively, that is, hardness softened and that part of micro-structures were re-solid-solution or recrystallized, the author also knew that there is no mechanically deformation on heat affected zone but there are the flow of plastic deformation of $45^{\circ}$ direction on thermo-mechanically affected zone and the segregation of Al-Mg on nugget. The solid solution wt(%) of parent material as compared against of friction stir welded zone was comprehensively changed.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.175-183
• /
• 2005

This study investigates the kinetic characteristics of the Driggs motion in horse vaulting by stages through the three-dimensional video analysis of YTY and TABARA who won a high score and a low score respectively from the Driggs motion in horse vaulting during the Daegu Universiade 2003, which involves putting one's hands on the horse vaulting rotating sideways, stretching and rotating backward in the air, and twisting 900 degrees, so as to help develop the techniques of Korean gymnastic athletes. From the analyses of the duration of body center, horizontality, vertical position and horizontality, vertical speed and angle factors for each of four phases from the contact of the board to the takeoff from the horse vaulting. I arrived at the following conclusions: 1. It was found that the motion of bending oneself forward while rapidly stretching the knee joint when taking off from the board increases the horizontal speed of body center and shortens the time of the first jump. 2. It was found that S1 who won a high score shortened the time of the contact and takeoff from the horse vaulting and enlarged the shoulder joint angle for full blocking motion. It was also found that horizontal speed decreased while vertical speed increased when you rapidly stretch the right elbow joint while taking off from the horse vaulting. 3. It was found that horizontal distance was shortened to increase the height and time of staying in the air during the second jump.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.639-644
• /
• 2011

The purpose of this study was to provide quantified data on the throwing skills of world-class athletes and to analyze the kinematic variables for women shot-putters at the IAAF World Championships Daegu 2011. Three-dimensional motion analyses of the eight players who qualified for the final round were carried out to obtain the data. The Kwon3D XP program was used for image analysis of the kinematic data, which included the configurations of each joint. The following conclusions were arrived at. The throwing distance increased with an increase in the release speed, and a significant correlation (p <. 01) was observed between the throwing distance and release speed. It was also shown that players using the spin technique increased their release speed with a fast shoulder-rotation-angle speed. The release height varied with their height and showed a significant difference with the record. This showed that the release angle did not greatly influence the record for the game, but varied with their technical and physical characteristics. Therefore, an increase in release speed is required to improve the record.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2053-2058
• /
• 2008

Extruded aluminium panels have been widely used for railway vehicle structures because of their light specific weight and other merit. In the past, GMAW (Gas Metal Arc Welding) and GTAW (Gas Tungsten Arc Welding) were mainly used to join aluminium panels. But recently friction stir welding (FSW) is widely used. due to its lots of advantage. In this study aluminium A6005-T6 which are used for car body structures was chosen. The influence of main parameters such as : pin rotating speed, welding speed, shoulder diameter, pin length and tilting angle on mechanical properties was examined. Optical microscope observation, micro hardness test and tensile test were carried out. Tensile strength of the stir welded plates is 74% of that of the base material.

• Clinics in Shoulder and Elbow
• /
• 제10권1호
• /
• pp.146-149
• /
• 2007

선천성 상위 견갑골은 주로 편측성으로 발생하는 선천성 질환으로 견갑골이 정상적인 위치보다 위에 위치하고 하각은 내측으로 상각은 외측으로 회전되는 변형이 발생한다. 저자들은 3-7세인 수술 적기가 이미 지난 상태였으며 수술적 치료를 시행한 1예를 문헌 고찰과 함께 보고하고자 한다. 환자는 7세 남자로 좌측 견갑-흉곽 운동의 제한을 주소로 내원하였으며 견갑 척추 골 유합과 견갑주위 근육의 발육부전도 동반되어있었고 수술적 교정 후 운동범위 증가와 미용의 개선이 있었다.

• 한국철도학회논문집
• /
• 제12권4호
• /
• pp.512-517
• /
• 2009

알루미늄합금 철도차량의 차제를 조립하기 위하여 적용하는 용접방식으로는 가스 메탈 아크용접과 가스 텅스텐 아크용접이 주로 적용되고 있다. 그러나 알루미늄합금은 강재에 비해 용접성이 불리하며, 용접결함을 제어하기 위하여 보다 엄격한 용접조건과 용접설비의 작업환경이 요구된다. 따라서 선진국을 중심으로 비 용융 고상접합 방식인 마찰교반용접(FSW)이 널리 상용화 되고 있다. 본 연구에서는 대형 중공형 알루미늄합금 차량에 적용되는 압출재 A6005 소재의 마찰교반용접 시 용접변수에 따른 용접부의 기계적 특성을 평가하고, 적용 공구에 대한 최적의 용접조건을 파악하고자 하였다.

• 대한기계학회논문집A
• /
• 제33권7호
• /
• pp.693-699
• /
• 2009

This paper shows mechanical properties and behaviors of macro- and micro-structures on friction stir welded specimen with 6061-T6 aluminum alloy plate. It apparently results in defect-free weld zone jointed at welding conditions like the traverse speed of 267mm/min, tool rotation speed of 2500rpm, pin inserted depth of 4.5mm and tilting angle of $2^{\circ}$ with tool dimensions such as tool pin diameter of 5mm, shoulder diameter of 15mm and pin length of 4.5mm. The tensile stress ${\sigma}_T=228MPa$ and the yield point ${\sigma}Y=141MPa$ are obtained at the condition of traverse speed of 267mm/min and tool rotation speed of 2500rpm. With the constant rotation speed, the higher traverse speed become, the higher tensile stress and yielding point become. Vickers hardness for welding zone profile were also presented.