• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.174-174
• /
• 2009

The acromioclavicular-hook-plate is one of the surgical treatments for distal clavicle fracture and traumatic acromioclavicular (AC) joint dislocation. Although this procedure can obtain rigid and accurate anatomical reduction of the AC joint, secondary widening of the hook-hole in the acromion is often seen during postoperative follow-up. This complication is owing to the high-degree of mobility of the AC joint. Therefore, it is important to evaluate the effect on these complications due to the position of the hook-hole. The purpose of the present study is to investigate three-dimensionally the effect due to the position of the hook-hole during arm abduction motion. We studied in vivo and three-dimensional kinematics of the normal shoulder joint with use of a markerless bone-registration technique. Magnetic resonance images of 14 shoulders of 7 healthy volunteers were acquired in 7 positions between $0^{\circ}$ and $180^{\circ}$ of abduction. We created three-dimensional computer models of the bones and the acromioclavicular-hook-plate. Based on the three-dimensional kinematics data, we simulated the widening of the hook-hole each different positioning of the hook-hole. The widths of the hook-holes almost linearly increased. And these widths significantly increased, when we put the hook-hole on the acromion from AC joint to 20 mm and 25 mm posterior position.

• The Journal of Korean Physical Therapy
• /
• v.12 no.2
• /
• pp.95-105
• /
• 2000

Glenohumeral internal and external rotation with shoulder abducted in the frontal plane often causes impingement of the supraspinatus tendon. whereas similar activity in scapular plane does not cause impingement. The Purpose of this study was to determine if assessment among the three positions as 30 degrees, 60 degrees, 90 degrees abduction in the sitting position of the scapular plane could be affected the comparison between intemal and external peak torque, total work, average power. In this study, Isokinetic shoulder rotational strength was evaluated in twenty healthy male university students, using the Cybex NORMTM System (CYBEX Division of LUMEX, Inc., Ronkonkoma, New York). Test data was gathered in the plane of the scapular, 30 degrees of horizontal flexion anterior to coronal plane, and the subjects performed the test with the arm 30, 60, and 90degrees abducted in the sitting position. also, test speed was set at deg/sec. Statistical analysis was performed using SPSS 7.5 for Windows software and mean and standard deviations were calculated. ANOVA was used to analyze the difference of the values in the three test positions. A paired t-test was used of examining the difference in the means peak torque between external and internal rotation. Not any significant difference was found among three abduction positions in scapular plane, even though there was a consistent pattern of greater strength in the abducted position of 60 degrees. Internal relation strength peak torque and total work were greater than those of external rotation in every test positions.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2005.03a
• /
• pp.107-111
• /
• 2005

29 year-old male was suffered from deep shoulder pain and muscle weakness 2 years ago. Recently 2 month ago lancinating shoulder pain and night pain was progressed. physical examination and MRI and EMG finding showed suprascapular nerve compression syndrome due to ganglion cyst in the shoulder joint. Arthroscopic ganglion cyst excision was performed and his symptoms was improved. 2 years later shoulder pain was developed in abduction and external rotation position and mild discomfort was continued. In second operation, SLAP lesion was found and arthroscopic SLAP repair was performed. Our case presented SLAP lesion occurred arthroscopic ganglion excision in the shoulder joint 2 years later.

• The Korean Journal of Pain
• /
• v.21 no.1
• /
• pp.57-61
• /
• 2008

Background: Shoulder joint injection is currently performed under fluoroscopic or computed tomography scan guidance. We performed this study to determine if an ultrasound guided shoulder joint injection through rotator cuff interval would have clinical usefulness. Methods: A total of 17 volunteers [12 women, 5 men; mean age 28 yr (23-32 yr)] received shoulder joint injection under multilinear ultrasound (5-10 MHz). Volunteers were positioned supinely on a table with their arm in a neutral position. The anterior shoulder region of the patient was sterilized using povidone iodine. A 24 gauge needle was introduced and directly visualized in real time as it passed obliquely from the skin surface to the inferior space of the biceps tendon. If there was little or no resistance to the injection, a contrast media (omnipaque) was injected and checked fluoroscopically. Results: Ultrasound guided shoulder joint injection through rotator cuff interval was successful in all cases. The average time taken for the procedure was $27.5{\pm}16.5sec$. The vertical distance from skin to the inferior space of the biceps tendon was $1.6{\pm}0.4cm$ and the distance of needle from the skin to the inferior space of biceps tendon was $2.8{\pm}0.6cm$. The procedure was well tolerated by all volunteers. Conclusions: Ultrasound guided shoulder joint injection through rotator cuff interval is an effective, rapid, and easy-to-perform injection technique. Ultrasound guided injection enables exact needle placement and avoids the use of both ionizing radiation and iodinated contrast material.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.1 no.2
• /
• pp.112-116
• /
• 2008

Ultrasonography of shoulder joint recently enlarges its utility since the knowledge of the shoulder disease is increased by numerous researches. Ultrasonography is not only noninvasive, safe, and relatively cheap, but also an unique modality that can monitor tendon movement during shoulder motion. Sonographic examination generally starts from the front side of the shoulder joint and finishes at back side in sitting position. Many structures in shoulder joint such as muscles, ligaments, glenoid labrum, bone, and especially rotator cuff tendon can be examined by ultrasonography. The rotator cuff is a motion unit consisted with subscapularis, supraspinatus, infraspinatus, and teres minor muscles. It functions as fulcrum and compresses the humeral head onto the glenoid, and steers for shoulder joint.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.15 no.1
• /
• pp.32-40
• /
• 2009

Purpose: The purposes of this study were to determine the intertester and intratester reliabilities of the Lateral Scapular Slide Test (LSST) method, and to examine if significant differences existed in scapular positions among the pain groups (right-shoulder pain group, left-shoulder, pain group and both-shoulders pain group). 27 female subjects (mean age = 51.6, mean height = 157.7 cm, mean weight = 57.5 kg) with shoulder pain were recruited for this study. Methods: The bilateral distances between the root of the scapular spine and T3/4 (RSS), and between the inferior scapular angle and T7/8 (IA), were recorded. Subjects were tested at three positions: the with arms with abducted at 0, 45 and 90 degrees in the coronal plane. The LSST measurements were performed by two testers, selected randomly. Results: The results were as follows: Intraclass correlation coefficients (ICCs) for the intertester reliability were excellent (ICC 0.78-0.94). And the ICCs for the intratester reliability were excellent (ICC 0.83-0.99). In the right-shoulder and both-shoulders pain groups, the right-side RSS and IA values of right side were significantly greater than of the left-side RSS values left side for the arms abducted at 0 degrees of right shoulder pain group and both shoulder pain group (p<.05). However, the side-to-side difference was less than 1.5 cm. Conclusion: Our results suggest that the LSST is highly reliable in identifying the abnormal scapular position of patients with shoulder problems. Future research should be continued to clarify the clinical usefulness of this method.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.16 no.1
• /
• pp.26-36
• /
• 2010

Purpose: The study compared the muscle activity and ratio of upper trapezius (UT) to lower trapezius (LT) activity between acute and chronic whiplash-associated disorder (WAD) patients. Methods: Twelve healthy (male: 7), 14 acute WAD (male: 7), and 11 chronic WAD (male: 3) volunteers participated in this study. Electromyography using a surface EMG recorded the activity of the upper trapezius and lower trapezius of both shoulders (dominant and non-dominant) during $120^{\circ}$ elevation when standing and shoulder depression when sitting. The testing order was selected randomly. Subjects were asked to maintain each experimental position for 5 seconds at end range. EMG activity was normalized using the maximal voluntary isometric contraction (MVIC) elicited using a manual muscle-testing technique. One-way repeated measures analysis of variance (ANOVA) was used to compare the average root mean square (RMS) value of EMG activity for each condition. Results: The EMG activity of the dominant UT for chronic WAD subjects was significantly higher than for acute WAD subjects during $120^{\circ}$ elevation (p<.05). The EMG activity of the dominant LT for acute WAD subjects was significantly lower than for the control group (p<.05) during $120^{\circ}$ elevation. The EMG activity of the dominant LT for WAD patients was significantly lower than for the control group during shoulder depression (p<.05), and the chronic WAD patients scored significantly the lowest (p<.01). The dominant UT/LT for chronic WAD patients was significantly higher than the ratio for acute WAD subjects during shoulder depression (p<.05); this result was higher than for the control group (p<.01). The non-dominant UT/LT (ratio) for chronic WAD patients was significantly higher than the ratio for acute WAD subjects during shoulder depression (p<.05). Conclusion: The UT for chronic WAD subjects was hyperactive when compared to the acute WAD subjects, and the was hypoactive for both acute and chronic patients, therefore intra-trapezius imbalance was more prevalent during shoulder depression.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.187-197
• /
• 2013

PURPOSE. The purpose of this study was to evaluate various core designs on stress distribution within zirconia crowns. MATERIALS AND METHODS. Three-dimensional finite element models, representing mandibular molars, comprising a prepared tooth, cement layer, zirconia core, and veneer porcelain were designed by computer software. The shoulder (1 mm in width) variations in core were incremental increases of 1 mm, 2 mm and 3 mm in proximal and lingual height, and buccal height respectively. To simulate masticatory force, loads of 280 N were applied from three directions (vertical, at a $45^{\circ}$ angle, and horizontal). To simulate maximum bite force, a load of 700 N was applied vertically to the crowns. Maximum principal stress (MPS) was determined for each model, loading condition, and position. RESULTS. In the maximum bite force simulation test, the MPSs on all crowns observed around the shoulder region and loading points. The compressive stresses were located in the shoulder region of the veneer-zirconia interface and at the occlusal region. In the test simulating masticatory force, the MPS was concentrated around the loading points, and the compressive stresses were located at the 3 mm height lingual shoulder region, when the load was applied horizontally. MPS increased in the shoulder region as the shoulder height increased. CONCLUSION. This study suggested that reinforced shoulder play an essential role in the success of the zirconia restoration, and veneer fracture due to occlusal loading can be prevented by proper core design, such as shoulder.

• The Journal of Korean Physical Therapy
• /
• v.32 no.4
• /
• pp.228-232
• /
• 2020

Purpose: This study examined the electromyography (EMG) activity of the abdominal muscles and the ratio of the oblique abdominal muscle activity to the rectus abdominis muscle during a single-leg holding position with isometric shoulder abduction (SLHISA) in the supine position on a foam roller. Methods: Nineteen healthy males were recruited to the study. Each subject was asked to lay on a round foam roller and perform singleleg (nondominant) holding with contralateral shoulder abduction to one of three angles (45°, 90°, or 135°) in random order. The surface EMG signals of the bilateral rectus abdominis (RA), external oblique abdominis (EO), and combined internal oblique abdominis (IO) and transverse abdominis (TrA) muscle were collected during the tasks. The EO/RA and (IO & TrA)/RA ratios were determined using surface EMG. One way repeated measure ANOVA with three SLHISAs was used to assess the significant abdominal muscle EMG activity and the ratio of the oblique abdominal muscles activity to the RA muscle. The statistical significance level was p<0.05. Results: The results were as follows. The SLHISA 135° showed significantly higher EMG activity of both RAs, left EO, and right IO & TrA muscles (p<0.05). The right EO and left IO and TrA muscles/RA were significantly different among the SLHISA angles. The SLHISA 45° showed a significantly greater ratio of right EO/RA and left IO & TrA/RA (p<0.05). Conclusion: SLHISA on a foam roller is useful for lumbopelvic stabilization exercise by increasing the activity and recruiting a specific pattern of the oblique abdominal muscle.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.295-306
• /
• 2002

The purpose of this study was analysis inter relative the ball velocity and isotonic torque of shoulder joint. The subject were twelve overthrow pitcher of professional baseball player. The measurement was used Cybex 6000. The results of this study were as follows : 1. As the siting position of maximal adduction torque of dominant, A group was higher than B group. As the non-dominant, B group was higher than A group for improved angular velocity. There is no significance difference between group. 2. As the siting position of maximal abduction torque of dominant and non-dominant, B group was higher than A group for all measurement. There is no significance difference between group. 3. As the layed position of maximal internal torque of dominant, A group was higher than B group. As the non-dominant was just higher at $180_{\circ}$/sec than B group, B group was higher at $60_{\circ}$/sec and $300_{\circ}$/sec than A group. There is no significance difference between group. 4. As the layed position of maximal external torque of dominant and non-dominant, A group was more higher than B group for all measurement. There is no significance difference between group. 5. As the standing position of maximal internal torque of dominant, A group was just higher at $60_{\circ}$/sec than B group, B group was higher at $180_{\circ}$/sec and $300_{\circ}$/sec than A group. As the non-dominant, B group was higher than A group. There is no significance difference between group. 6. As the standing position of maximal external torque of dominant, A group was higher $60_{\circ}$/sec and $180_{\circ}$/sec than B group. But B group was higher $300_{\circ}$/sec than A group. As the non-dominant, B group was higher than A group. There is no significance difference between group.