• 한국운동역학회지
• /
• 제14권1호
• /
• pp.51-63
• /
• 2004

The purpose of this study was to investigate a three dimensional kinematic variables about the last stride and the release phase of the throwing technique for female javelin throwers. For the motion analysis, Six female javelin throwers were used as subjects. Three-dimensional coordinates were collected using the Kwon3D Motion Analysis Package Version 2.1 Program. Two S-VHS Video Cameras were used to record the locations and orientations of control object and the performances of the subjects at a frequency of 6.0 HZ. After the kinematic variables such as the time, the distance, the velocity, and the angle were analyzed about the last stride and release phase, the followings were achieved; 1. For the effectively javelin throwing, the subjects appeared to do long the approach time in the phasel of landing phase, and short the delivery time in release phase 2. In the release event, the other subjects except for subject A appeared to throwing in the lower condition than the height of themselves. This result showed to slow the projecion velocity. 3. For increase the projection vcelocity of the upper extremity joint in the release event, it appeared to do extend rather the shoulder angle than increase the extension of elbow joint. 4. The body of COG angle showed to gradually increase nearly at the vertical axis in the release event. But the front lean angle of trunk showed a small angle compare to increase of the body of COG angle. Therefore for the effectively momentum transmission of the whole body in the javelin, the front and back lean angle of trunk appeared to do fastly transfer the angle displacement in the arch posture or the crescent condition during the deliverly motion of the release phase.

• 대한정형도수물리치료학회지
• /
• 제24권2호
• /
• pp.51-58
• /
• 2018

Backdround: Using RUSI (Rehabilitation Ultra Sound Imiging) method, which showed high reliability in soft tissue measurements, we compared the muscle relax and contraction, sex, and physical characteristics of the activity of the multifidus muscle in patients with chronic low back pain and normal subjects. Methods: In this study, 16 patients (male: 8, female: 8) with chronic low back pain and 16 healthy adult (male: 8, female: 8) were participated. Subjects lied prone posture on the table with elbow flexed $90^{\circ}$ and shoulder abducted $120^{\circ}$ (starting position). Test was applied two types that muscle relax position and muscle contraction position. Muscle relax position is equal to starting position and muscle contraction position is that upper extremity lift up about 5cm from the table. We measured the thickness of the multifidus muscle in each position by ultrasound. Results: There was a statistically significant difference between the two groups in deviation of Both Side Difference of Activated resting-Arm Lifting Ratio according to posture change between the chronic low back pain patient group and the normal group. Conclusion: The result of this study support previous study showing that there is an imbalance in the activity of multifidus in patients with chronic low back pain.

• 한국전문물리치료학회지
• /
• 제11권4호
• /
• pp.7-17
• /
• 2004

Individuals who propel wheelchairs have a high prevalence of upper extremity injuries (i.e., carpal tunnel syndrome, elbow/shoulder tendonitis, impingement syndrome). Musculoskeletal injuries can result from overuse or incorrect use of manual wheelchairs, and can hinder rehabilitation efforts. To better understand the mechanisms of upper extremity injuries, this study investigates the motion of the wrist during wheelchair propulsion. This study also examines changes in the variables that occur with fatiguing wheelchair propulsion to determine how the time parameters of wheelchair propulsion and the state of fatigue influence the risk of injury. A two dimensional (2-D) analysis of wrist movement during the wheelchair stroke was performed. Twenty subjects propelled a wheelchair handrim on a motor-driven treadmill at two different velocities (50, 70 m/min). The results of this study were as follows; The difference in time parameters of wheelchair propulsion (cadence, cycle time, push time, recovery time, and PSP ratio) at two different velocities was statistically significant. The wrist kinematic characteristics had statistically significant differences at two different velocities, but wrist radial deviation and elbow flexion/extension had no statistically significant differences. There were statistically significant differences in relation to fatigue in the time parameter of wheelchair propulsion (70 m/min) between initial 1 minute and final 1 minute. The wrist kinematic characteristics between the initial 1 minute and final 1 minute in relation to fatigue had statistically significant differences but the wrist flexion-extension (50 m/min) had no statistically significant differences. According to the results, the risk of musculoskeletal injuries is increased by fatigue from wheelchair propulsion. To prevent musculoskeletal injuries, wheelchair users should train in a muscle endurance program and consider wearing a splinting/grove. Moreover, wheelchair users need education on propulsion posture, suitable joint position, and proper recovery patterns of propulsion.

• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.650-659
• /
• 2020

The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.421-426
• /
• 2015

Need to develop human body's posture supervised robots, gave the push to researchers to think over dexterous design of exoskeleton robots. It requires to develop quantitative techniques to assess human motor function and generate the command to assist in compliance with complex human motion. Upper limb rehabilitation robots, are one of those robots. These robots are used for the rehabilitation of patients having movement disorder due to spinal or brain injuries. One aspect that must be fulfilled by these robots, is to cope with uncertainties due to different patients, without significantly degrading the performance. In this paper, we propose chattering free sliding mode control technique for this purpose. This control technique is not only able to handle matched uncertainties due to different patients but also for unmatched as well. Using this technique, patients feel active assistance as they deviate from the desired trajectory. Proposed methodology is implemented on seven degrees of freedom (DOF) upper limb rehabilitation robot. In this robot, shoulder and elbow joints are powered by electric motors while rest of the joints are kept passive. Due to these active joints, robot is able to move in sagittal plane only while abduction and adduction motion in shoulder joint is kept passive. Exoskeleton performance is evaluated experimentally by a neurologically intact subjects while varying the mass properties. Results show effectiveness of proposed control methodology for the given scenario even having 20 % uncertain parameters in system modeling.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.203-218
• /
• 2004

The purpose of this study was to analyze the comparisons of the kinematical variables when performing Yoko Ukemi(side breakfall) by three Stage in Judo. The subjects were four male judokas who were trainees Y. I. University Squad members and the Yoko Ukemi were filmed by two S-VHS 16mm video cameras(60fields/sec.). The selected times were subject to KWON 3D analysis program and kinematical analysis to compare variables of three Yoko Ukemi. Temporal variables(total time-required : TK, TR by each phase), the body part touched order on the mat and COG variables were computed through video analysis while performing right Yoko Ukemi by three stage. From the data analysis and discussion, the following conclusions were drawn : 1. Temporal variables : total time-required(TR) when performing Yoko Ukemi(side breakfall) by each stage, the first stage(full squat posture: FP : 1.11sec.) showed the shortest time, the next was 3rd(Shizenhontai, straight natural posture: NP : 1.41sec.), and 2nd(Jigohontai, straight defensive posture, DP : 1.42sec.), respectively- 2. TR when performing Yoko Ukemi(side breakfall) by each stage, and phase : the first phase(take of phase, average 0.68sec.) showed the longest time, next was the third phase(ukemi phase, 0.39sec.), and the second phase(air phase, 0.23sec.), respectively. 3. When performing yore Ukemi the body part touched order and TR on the mat : hip(0.94sec.) showed the shortest time, the next was elbow hand(0.97sec.), back(0.98sec.), and shoulder(1.04sec.) order. The hip part touched on the mat the first, but slap the mat in order to alleviate the shock try hand palm and forearm before receiving impact (difference 0.03sec,) 4. Vertical COG variables in each event by each stage : e1(ready position, average 78.33cm) moved the highest, the next was e2(jumping position, 70.14cm), e3(transition position, average 64.00cm), e4(landing position, average 35.99cm), and e5(ukemi position, average 18.32cm) order, gradual decrease respectively. And the difference of COG were showed in initial by each stage, because position fo Yoko Ukemi was difference by each stage in preparation position, but in accordance with executing of Ukemi phase that difference of COG was by decreasing, almost equal displacement in e4(landing) and e5(Ukemi)position finally.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.277-291
• /
• 2003

This study was designed to examine the kinematic factors in the phase during the marche fente motion. For this study, the subjects were 5 elite male fencing players. The direct linear transformation (DLT) method was used in calculating 3-D coordinate of the digitized body parts. The cubic spline function was used for smoothing and the kinematic data for displacement, velocity, angle variables were calculated for Kwon3d ver 2.1. And the following conclusions were drawn; 1. It show that the marche phase appeared to longer time than the pante phase In the performance time. For the fast attack, it showed that the subjects should be moving in a short stride width. 2. For a fast and stable movement posture in the marche phase, the vertical change of COG must be maintain the same position as possible, but all subjects appeared to decrease the COG because of a excessive the knee flection. 3. In the COG velocity change, all the subjects showed to the same change in both the marche and the fente phase. However in the attack extremity velocity, it increased velocity in order of upper arm, fore arm, and hand in the marche phase, but it showed different velocity among each subjects at the moment of stabbing. So that in order to do effective stabbing, they have to extend their upper extremity max and do faster the distal segment than the proximal segment. 4. It showed to take a fast and stable movement, because some subjects showed the big anteroposterior angle of the trunk flexed max shoulder angle and elbow angle of their attack arm and the other upper extremity.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.74-79
• /
• 2015

The purpose of this study is to find out its effect on changes in the joint angle and the success rate of cardiopulmonary resuscitation by conducting cardiopulmonary resuscitation (CPR) when wearing and not wearing PPE (personal protective equipment) targeting 20 paramedics with more than 5 years of experience. The subjects carried out CPR in 30:2 for 4 minutes and collected images were digitized by Kwon3D XP Software Package(Version 4.0) and then data were obtained. Data, which were collected by analyzing the motion when starting in one cycle, when pressing to the maximum, in the final position (relaxed), were analyzed by using SPSS 18.0. In conclusion, during CPR, the angle of the both shoulder joints was not significant (p>.05) and the angle of the right elbow joint was reduced in all positions and was statistically significant (p<.05) and the angle of the left was significantly reduced in the maximum pressure posture and the final position (p>.05). In the case of the trunk, the angle increased statistically significantly at all stages (p<.01, p<.001). Also, during CPR, the average compression rate was significantly reduced after wearing PPE (p<.05) and average hand escape time by cycle increased statistically significantly (p<.05) but chest compression execution rate at the correct depth did not show any significant difference between the two groups (p>05).

• 디자인학연구
• /
• 제12권1호
• /
• pp.157-166
• /
• 1999

컴퓨터의 도입과 함께 VDT 증후군이라는 새로운 사회문제가 제기되고 있다. 다양한 체격의 사용자가 무리 없는 자세로 VDT작업을 수행하기 위해서는 인간공학적인 설계기준이 필요하다. 본 연구에서는 선 연구의 설계지침을 이용하여 설계 권장치수를 먼저 제시하였다. 이에 대찬 타당성 검증을 위해 사용자의 선호치수를 구하였고, 그것과 설계지침에 따른 차이를 분석하였다. 그리고 안락감과 신체불편도 평가를 통한 주관적 평가와 근전도(EMG)분석을 통한 객관적 평가를 사용하여 각 설계치수가 인체에 미치는 영향을 비교분석 하였다. 워크스테이션에서 중요한 키보드의 높이는 팔꿈치보다 높이가 낮다면 손과 손목에 영향을 미치고, 높으면 목과 어깨에 피로를 가져다준다. 본 연구 실험결과 한국인을 위한 키보드책상의 권장치수는 고정식일 때 660mm 조절식일 때 540-774mm를 추천한다. 그 외 설계권장치수는 본문에 제시하였으며 이와 같은 인간공학적 권장치수는 결론적으로 사용자의 신체에 맞게끔 조절범위를 제공하므로 설계 분야에 중요한 기초자료가 되리라본다.

• 복식문화연구
• /
• 제25권3호
• /
• pp.301-314
• /
• 2017

This study focused on the movement adaptability of $19^{th}$ century classical opera stage costumes. Researchers focused on a basic $19^{th}$ century women's jacket. The study analyzed movement adaptability using ROM (range-of-motion) tests of the upper limb flexion and abduction postures. It developed two research garments to mimic basic $19^{th}$ century style jackets with or without gussets at the axilla. The ROM experiment identified the gusset size as 11cm in length. Experimental postures included upper limb flexion and abduction. The study measured subjective comfort at 8 postures. These postures included the flexion and abduction of the arms and torso. Subjects also evaluated the subjective comfort of the rotation posture of the torso. Researchers evaluated the similarities between research garments' silhouettes and the $19^{th}$ century women's jacket. The study used a 3D virtual fitting system to evaluate fit, and specialists further analyzed fit with photographs and 3D virtual graphics. The results are as follows. The silhouettes of both research garments were similar to the silhouettes of the $19^{th}$ century western women's jacket. The jacket with axilla gusset had a better fit than the basic style jacket. The basic style jacket without the axilla gusset showed limited movement adaptability at the shoulder joint and it caused discomfort at the axilla and elbow. The 3D virtual fit test was not a suitable method for analyzing silhouette similarity.