• 한국운동역학회지
• /
• 제22권3호
• /
• pp.269-276
• /
• 2012

The purpose of This study's aim is to examine the difference in the changes of body segment movement, variables for ball quality, and carry at golf driver swing according to the ball quality using comparative analysis. Regarding the impact variables according to the ball quality using the track man and carry, club speed was the fastest at draw shot, ball speed was the fastest at straight shot, and smash factor was the lowest at draw shot. About the vertical launch angle, the fade shot showed the highest launch angle while the max height of the ground and ball was the highest at fade shot. And carry was the longest at draw shot. For the flight time, it was the longest at draw shot. The landing angle was the largest at fade shot. About the club head position change and trajectory, at the overall event point, the fade shot drew a more outer trajectory at the point of the follow through(E6) than the straight or draw shot. Regarding the angular speed of shoulder rotation, at the overall event point, the fade shot showed the greatest angular speed change in the follow through(E6). Also, about the angular speed of pelvic rotation, at the overall event point, the draw shot showed the greatest angular speed change at the point of down swing(E4). Concerning the stance angle change, both straight and fade shots were open as the concept of open stance whereas the draw shot was close as that of close stance. Regarding the previous study, the most important factor of deciding Ball Quality is the club face angle's open and close state at Impact. In short, the Ball Quality and carry were decided by this factor.

• Journal of Korean Neurosurgical Society
• /
• 제52권4호
• /
• pp.346-352
• /
• 2012

Objective : We compared the radiological and clinical outcomes between patients who underwent posterior fixation alone and supplemented with fusion following the onset of thoracolumbar burst fractures. In addition, we also evaluated the necessity of posterolateral fusion for patients treated with posterior pedicle screw fixation. Methods : From January 2007 to December 2009, 46 consecutive patients with thoracolumbar burst fracture were included in this study. On the basis of posterolateral fusion, we divided our patients into the non-fusion group and the fusion group. The radiological assessment was performed according to the Cobb's method, and results were obtained at immediately, 3, 6, 12 months after surgery. The clinical outcomes were evaluated using the modified Mcnab criteria at the final follow-up. Results : The demographic data and the mean follow-up period were similar between the two groups. Patients of both groups achieved satisfactory clinical outcomes. The mean loss of kyphosis correction showed that patients of both groups experienced loss of correction with no respect to whether they underwent the posterolateral fusion. There was no significant difference in the degree of loss of correction at any time points of the follow-up between the two groups. In addition, we also compared the effect of fixed levels (i.e., short versus long segment) on loss of correction between the two groups and there was no significant difference. There were no major complications postoperatively and during follow-up period. Conclusion : We suggest that posterolateral fusion may be unnecessary for patients with thoracolumbar burst fractures who underwent posterior pedicle screw fixation.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 1997년도 제11회 하계학술발표회 논문집
• /
• pp.224-243
• /
• 1997

The study examines the similarities of competitive strategy between fashion industry and high-tech industry through a case study of a Japanese maker. From the study, some implications are drawn for the Korean fashion industry. It is hoped that this, will help towards establishing a suitable competitive strategy for firms in this industry. In the fashion industry, the product life cycle is so short as to prompt a new product obsolete too quickly, and the extent of product differentiation is remarkably extensive compared to any other industry. Generally speaking, firms in this industry focus more of their resources on product development and marketing rattler than on production and they attempt to maneuver the speed when they are required to enhance their competitive edge. This is enabled through being, as one might expect, information- and technology- intensive as are high-tech industries. In this sense, that of the competitive strategy of a firm in fashion industry to be similar to high-tech industry. The Japanese firm Y has transformed itself a leading firm in fashion uniform segment. The firm could achieve this status by integrating each function needed for creating customer*s value, that is, product development, production and marketing within one Quick Response System. For this purpose, Y introduced a bundle of high-tech communication systems such as SPD, SDS, ATOM, NICS and so on. In this sense it can be said that Y was aware of what sort of competitive strategy was required in the industry. Implications for Korean firms is that, first, the magnitude of understanding the industry specific factors in establishing competitive strategy in the fashion industry, are speed, flexibility and systematic integration supported by high technology which are characteristic of high-tech industries. Secondly, as can be seen in the fact that Y emphasized logistics in its technological transformation, the significance of logistics control is a key to manipulating speed and flexibility in the industry. To sum up, those who have insight into above findings will be likely to keep their competitiveness in the industry not only in the Korean market but also in global market in the near future.

• 대한토목학회논문집
• /
• 제40권3호
• /
• pp.265-271
• /
• 2020

첨단 차량에서 가장 중요한 장비 중 하나인 차량레이더는 일반적으로 자동차와 같은 객체의 속도와 범위를 감지하는데 사용된다. 본 논문에서는 객체감지 이외에 차량레이더 자료를 이용하여 강수 정보를 추정하는 방법을 제안한다. 제안된 방법은 레이더 수신신호의 감쇠 정도가 강수 강도에 따라 다르다는 사실과 시공간적으로 짧은 관측에서는 강수의 분포가 일정하다는 가정에 근거한다. 본 논문은 차량 레이더를 이용하여 강수정보 추정에 대한 타당성을 평가하는데 목적이 있다. 실제 주행 중 제안 된 방법의 실현 가능성을 검증하기 위해, 다양한 강수 사상의 각 시간 세그먼트에 대한 강수정보 추정 방법이 적용되었다. 주행 현장실험의 결과로부터 제안된 방법이 다양한 강우 유형에서 강수 정보 추정에 적합하다는 것을 알 수 있었다.

• 한국대기환경학회지
• /
• 제29권6호
• /
• pp.745-756
• /
• 2013

The purpose of this study is to evaluate representativeness of fuel-based emission factors. Twelve light-duty diesel vehicles which meet Euro-3 to 5 legislative emission limits were selected for emission tests. Second-by-second modal emission rates of vehicles were measured on a standard laboratory chassis dynamometer system. An off-cycle driving cycle was developed as a representative Korean real-world on-road driving cycle. Fuel-based emission factors were developed for short trip segments that involved in the selected driving cycle. Each segment was defined to have unit travel distance, which is 1 km, and characterized by its average speed and Relative Positive Acceleration (RPA). Fuel-based $NO_x$ emission factors demonstrate relatively good representativeness in terms of vehicle operation conditions. $NO_x$ emission factors are estimated to be within ${\pm}20%$ of area-wide emission factor under more than 40% of total driving situations. This result implies that the fuel-based $NO_x$ emission factor could be practically implemented into the on-road emission management strategies, such as a remote sensing device (RSD). High emitting vehicles as well as high emitting operating conditions heavily affect on the mean values and distributions of CO and THC emission factors. Few high emitting conditions are pulling up the mean value and biasing the distributions, which weaken representativeness of fuel-based CO and THC emission factors.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권7호
• /
• pp.921-926
• /
• 2012

In order to protect the genetic resource of native horse breeds, the genetic diversity of mitochondrial DNA (mtDNA) D-loop of three native horse breeds in western China were investigated. Forty-three 600 bp mtDNA D-loop sequences were analyzed by PCR and sequencing techniques, 33 unique haplotypes with 70 polymorphic sites were detected in these horses, which account for 11.67% of 600 bp sequence analyzed, showing the abundant genetic diversity of the three native horse breeds in western China. The Neighbour-Joining (NJ) phylogenetic tree based on 247 bp of 43 D-loop sequences demonstrated the presence of seven major lineages (A to G), indicating that the three native horse breeds in western China originated from multiple maternal origins. Consistent with the front, the NJ phylogenetic tree based on 600 bp of mtDNA D-loop sequences of 43 Chinese western native horses and 81 sequences of six horse breeds from GenBank indicated that the three horse breeds had distributed into the seven major lineages (A to G). The structure of the phylogenic tree is often blurred because the variation in a short segment of the mitochondrial genome is often accompanied by high levels of recurrent mutations. Consequently, longer D-loop sequences are helpful in achieving a higher level of molecular resolution in horses.

• Journal of Chest Surgery
• /
• 제32권2호
• /
• pp.185-188
• /
• 1999

폐에 발생한 거세포암종은 대세포암의 일종의 변형으로 현미경상 전체세포중 10% 이상의 거대한 다형, 다핵의 거세포종으로 구성되어 있으며, 중성구가 종양세포내로 들어가는 세포내행동(Emperipolesis)이 특징적인 소견이다. 국소재발과 초기전이를 잘 일으키는 고도의 악성종양으로 예후는 불량하나, 수술후 보조화학요법과 방사선요법에 의해 생존률을 높일 수 있다는 보고들이 있다. 2달간의 객혈을 주소로 내원한 46세의 남자환자가 단순 흉부 X선 검사와 전산화 단층촬영상 우상엽 첨부에 5 cm크기의 종괴가 발견되었고, 수술을 위한 검사도중 관상동맥조영술상 좌전하행지에 협착소견이 보여 경피적 경혈관혈관확장술을 시행하였다. 4주후 우상엽 절제술을 시행후 병리조직상 거세포암종으로 확인되어, 보조화학요법과 방사선요법을 받았다.

• Journal of Chest Surgery
• /
• 제50권2호
• /
• pp.133-136
• /
• 2017

A 27-year-old female patient was referred due to an edematous left lower extremity. Both saphenous veins had been ablated with an endovenous laser procedure used to treat varicose veins. Venography revealed that the left common femoral vein had been divided and that thrombosis was present at the site of division. No veins were available around the thighs. The patient was treated using a staged procedure. During the first stage, a ringed polytetrafluoroethylene graft was used to repair the common femoral vein, and an arteriovenous fistula was constructed from the femoral artery to the graft using a short segment of cephalic vein to increase graft patency. The edema was relieved postoperatively and the graft was patent. During the second stage, which was performed 6 months later, the fistula was occluded by coil embolization. The staged procedure described herein provides an alternative for venous reconstruction when autologous vein is unavailable.

• Journal of Korean Neurosurgical Society
• /
• 제44권1호
• /
• pp.52-56
• /
• 2008

Objective : The purpose of this study was to introduce our surgical experiences of scoliosis and to evaluate the effectiveness of anterior correction and fusion in adolescent idiopathic scoliosis (AIS). Methods : Between August 2004 and August 2007, four patients with AIS were treated with anterior segmental fusion and fixation at our hospital. Mean follow-up period was 9 (6-12) months. The average age was 14.0 (13-15) years. According to Lenke classification, three patients showed Lenke 1 curve and one patient with Lenke 5 curve. Single rod instrumentation was performed in one patient, dual rod instrumentation in one patient and combined rod instrumentation in two patients. Coronal Cobb measurements were performed on all curves in thoracic, thoracolumbar and, lumbar spine and the angle of hump was measured by a scoliometer pre- and postoperatively. Results : The average operative time was 394 minutes (255-525) with an average intraoperative blood loss of 1,225 ml (1,000-1,700). The mean period of hospital stay was 19.3 days and there was no complication related to the surgery. The mean Cobb angle was reduced from $43.3^{\circ}$ to $14.8^{\circ}$ (65.8% correction) postoperatively and the rib hump corrected less than $5^{\circ}$. All patients and their parents were satisfied with the deformity correction. Conclusion : Anterior spinal correction and fusion of AIS with Lenke 1 and 5 curve showed excellent deformity correction without any complications. In particular, we recommend anterior dual rod instrumentation because of mechanical stability, better control of kyphosis, and a higher fusion rate.

• Earthquakes and Structures
• /
• 제10권6호
• /
• pp.1253-1272
• /
• 2016

For a nonlinear control system, there are many uncertainties, such as the structural model, controlled parameters and external loads. Although the significant progress has been achieved on the robust control of nonlinear systems through some researches on this issue, there are still some limitations, for instance, the complicated solving process, weak conservatism of system, involuted structures and high order of controllers. In this study, the computational structural mechanics and optimal control theory are adopted to address above problems. The induced norm is the eigenvalue problem in structural mechanics, i.e., the elastic stable Euler critical force or eigenfrequency of structural system. The segment mixed energy is introduced with a precise integration and an extended Wittrick-Williams (W-W) induced norm calculation method. This is then incorporated in the market-based control (MBC) theory and combined with the force analogy method (FAM) to solve the MBC robust strategy (R-MBC) of nonlinear systems. Finally, a single-degree-of-freedom (SDOF) system and a 9-stories steel frame structure are analyzed. The results are compared with those calculated by the $H{\infty}$-robust (R-$H{\infty}$) algorithm, and show the induced norm leads to the infinite control output as soon as it reaches the critical value. The R-MBC strategy has a better control effect than the R-$H{\infty}$ algorithm and has the advantage of strong strain capacity and short online computation time. Thus, it can be applied to large complex structures.