• 제목/요약/키워드: Shorea sp.

검색결과 6건 처리시간 0.018초

Pathogenic Effects of the Microsporidian Nosema sp., on Larval and Post-cocoon Parameters in Tasar Silkworm, Antheraea mylitta Drury (Daba TV)

  • Renuka, G.;Shamitha, G.
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제26권1호
    • /
    • pp.1-12
    • /
    • 2013
  • The commercial rearing of polyphagous Indian tasar silkworm, Antheraea mylitta Drury being practiced on naturally grown primary food plants like Terminalia arjuna, (Arjun) Terminalia tomentosa (Asan), and Shorea robusta (Sal) available in the tropical forests of central India, at times, is seriously affected by the disease- Pebrine, caused by Nosema sp., a microsporidian pathogen. The present investigation on comparative larval, silk gland weight and also cocoon parameters in Pebrine-free and Pebrine-infected ecorace of tasar silkworm Antheraea mylitta Drury (Daba TV), illustrates the tasar silkworm larvae infected with pebrine disease causing heavy losses to the economy of the silk industry.

춘천 조양루 목부재의 수종과 연륜연대 분석 (Species Identification and Tree-ring Dating of Wood Elements of Joyangru Pavilion, Chuncheon, Korea)

  • 박서영;김상규;박원규
    • 한국가구학회지
    • /
    • 제20권1호
    • /
    • pp.52-60
    • /
    • 2009
  • Joyangru, which is located in Woodo mountain in Chuncheon, Korea, was a gate tower of Monsogak. There are little historical records about Joyangru except of the 20th-century records. To study about Joyangru history, a dendrochronological analysis was conducted. We identified also the species of woods, We took 87 samples of wood elements for the species analysis and 13 samples for the dendrochronological analysis. We found 78 hard pines(Diploxylon), 4 Douglass-fir, 3 exotic hard pines(Pinus ponderosa type) and 1 Shorea sp.(Dipterocarpaceae). In the dendrochronological analysis, 2 floor flames were dated in 1887 (with complete sapwood) and 2 beams in 1884. We concluded that Joyangru was reconstructed just after 1888, most likely in 1890 together with Monsogak.

  • PDF

침엽수와 활엽수 골목에서 Ganoderma lucidum의 발생과 자실체의 Organic Germanium과 Ganoderic Acid 함량 (Development of Ganoderma lucidum on Soft and Hard Wood Logs and Determination of Organic Germanium and Ganoderic Acid Content of the Fruiting Body Produced)

  • 남피아 수카르노;알-아즈하리아타 에이니;비비 슈마르니;에티로해티;라티페K. 다르슈만
    • 한국버섯학회지
    • /
    • 제2권3호
    • /
    • pp.157-162
    • /
    • 2004
  • 이 실험의 목적은 침엽수(Paraserianthes falcataria)와 활엽수(Shoreasp) 골목에서 두 개의 Ganoderma lucidum 균주의 자실체 발생과 성장을 연구하고 자실체의 organic germanium 과 crude ganoderic acid 함량을 측정하기 위함이다. 두 개의 Ganaderma lucidum중 하나는 인도네시아 본지에서 분리한 것이고 또 다른 하나는 Fungi Perfecti, USA에서 구입한 것을 사용하였다. 일반적으로 활엽수에서 생성된 자실체의 농도가 침엽수에서 자란 것보다 훨씬 높다. 두 종류의 골목 모두에서 상업용 균주에서 생산된 자실체의 organic germanium 농도가 인도네시아의 균주에서 생산된 자실체의 organic germanium 농도보다 높았다. 이에 반하여 버섯 자실체의 crude ganoderic acid 농도는 두 개의 균주로부터 생산된 자실체에서 거의 같은 농도를 보였다. 인도네시아 균주는 상업용 분리균주와 비교했을 때 생산된 자실체의 총 organic germanium과 총 crude ganoderic acid의 생산성이 높았다.

  • PDF

Some Physical and Chemical Properties of Carbonized Wood Wastes(II)

  • Kim, Byung-Ro;Mishiro, Akiyoshi
    • Journal of the Korean Wood Science and Technology
    • /
    • 제26권2호
    • /
    • pp.6-15
    • /
    • 1998
  • A total of forty five-ply, 30- by 30-cm lauan and larch plywood sheets were manufactured in the laboratory using commercial urea and phenol resin adhesives; half of these sheets were treated with fresh concrete. Each sheet was carbonized for 2, 4, and 6hours at $400^{\circ}C$, $600^{\circ}C$, and $750^{\circ}C$, respectively, and their physical properties were measured. The yie1d of charcoal decreased as carbonization temperature and time increased. Charcoal yield was greater in plywood than in veneer, and slightly greater in plywood treated with concrete compared to untreated plywood. Plywood manufactured with phenol resin adhesive had higher pH, higher equilibrium moisture content (EMC), and greater adsorption of methylene-blue dye compared to plywood manufactured with urea resin. For concrete-treated plywood, pH was greater than 10 even when the sheets were carbonized for 2hours at $400^{\circ}C$. Although the EMC of the phenol resin plywood was higher than that of the urea resin plywood, EMC of the phenol resin was lower than that of the urea resin. The larch phenol resin plywood that was carbonized for 6 hours at $750^{\circ}C$ adsorbed more methylene-blue than did the commercia1 wood-based activated charcoal as a result of total pore volume and surface area.

  • PDF

목재의 흡방습에 관한 연구 - 수종에 의한 흡방습성의 차이 - (Studies on Absorption and Desorption Wood - Difference of Absorption and Desorption Behavior of Wood -)

  • 이원희
    • Journal of the Korean Wood Science and Technology
    • /
    • 제19권4호
    • /
    • pp.52-61
    • /
    • 1991
  • In this paper, the difference of the property of absorption and desorption for five species in semi-steady state are studied. The species used are listed in Table 1 and the dimension of specimen was $8\times8{\times}T$(Tangential direction)cm and tested in various conditions. A change of average moisture content with time were measured in each cycles. The results obtained are summarized as follows. When the relative humidity in air was maximum or minimum, the distribution of moisture In wood of all specimens were illustrated by exponential curves of decrease or increased from lace 10 center of wood. From the consideration of coefficient of decrease(C), the amount of moisture change of spruce was larger than the others. The pheonomenon was considered no relation to the specific gravity in air dry, but the wood structures. The velocity of the absorption and desorption for species decreased in the order spruce(Picea sitchensis) neodobam(Fagus crenata), solsong(Tsuga heterophylla), meranti(Shorea sp.) and kaesoo(Cercidiphyllum japoicum). In case of constant temperature and water vapor pressure is changed. the amount of absorbed moisture was larger than that of constant water vapor pressure and temperature vaned. In this fact, it is considered that the property of sorption of wood is strongly influenced by vapor pressure gradient than temperature gradient.

  • PDF

폴리프로필렌사(絲)칩과 배향사(配向絲)를 결체(結締)한 톱밥보드의 물리적(物理的) 및 기계적(機械的) 성질(性質)에 관(關)한 연구(硏究) (A Study on Physical and Mechanical Properties of Sawdustboards combined with Polypropylene Chip and Oriented Thread)

  • 서진석;이필우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제16권2호
    • /
    • pp.1-41
    • /
    • 1988
  • 톱밥을 보드에 활용(活用)하기 위한 방안(方案)으로서, 톱밥자체의 약(弱)한 결집력(結集力)과 치수불량성(不良性)을 개선(改善)하기 위하여 비(非) 목질계(木質系) 재료(材料)인 폴리프로필렌 사(絲)칩과 배향사(配向絲)를 혼합(混合) 결체(結締)함에 다른 보드의 기초성질(基礎性質)로서 물리적(物理的) 기계적(機械的) 성질(性質)을 고찰(考察)하였는 바, 현재(現在) 제재용(製材用)으로 많이 이용(利用)되고 있는 나왕재(羅王材)(white meranti)의 톱밥에 개질재료(改質材料)로서 비(非) 목질(木質) 계(系) 플라스틱 물질(物質)인 폴리프로필렌 사(絲)를 칩상(狀) 또는 배향사(配向絲)의 형태(形態)로 조제(調製)하여 일반(一般) 성형법(成型法)을 적용(適用)함으로써 톱밥과 결체(結締) 구성(構成)한 톱밥보드를 제조(製造)하였다. 12 및 15%로 하여 구성(構成)하였다. 배향사(配向絲)는 보드폭방향(幅方向)으로 0.5, 1.0 및 1.5cm의 일정(一定)한 간격(間隔)으로 배열(配列)하였다. 위의 조건(條件)에 의(依)해 단(單) 2 3층(層)으로 각기(各己) 구분(區分)제조된 사(絲)칩 또는 배향사(配向絲) 구성(構成) 톱밥보드의 물리적(物理的) 및 기계적(機械的) 성질(性質)을 구명(究明)하였는 바, 그 주요(主要)한 결론(結論)을 요약(要約)하면 다음과 같다. 1. 사(絲)칩 혼합(混合) 단층구성(單層構成)보드의 두께 팽창율(膨脹率)은 톱잡대조(對照)보드의 팽창율보다 모두 낮았다. 사(絲)칩 함량(含量)을 증가(增加) 시킴에 따라서 두께 팽창율은 점차(漸次) 감소(減少)하는 경향이 뚜렷하였다. 한편, 2층구성(層構成)보드는 단층(單層) 구성(構成)보드보다 높은 팽창율을 나타냈으나 대부분이 톱밥대조(對照)보드 보다 팽창율이 낮았다. 3층(層)으로 사(絲)칩구성(構成)한 보드는 톱밥대조(對照)보드보다도 모두 낮은 두께 팽창율을 나타냈다. 2. 사(絲)칩 배향사(配向絲) 구성(構成)보드의 두께 팽창율은 0.5cm 배향간격에서 사(絲)칩함량(含量) 12%와 15%의 길이 1.0cm와 1.5cm로 구성함으로써 단층(單層) 및 3층구성(層構成)보드의 최저치(最低値)보다 더 낮았다. 3. 단층구성(單層構成)보드의 휨강도는 비중(比重) 0.51 구성(構成)보드의 경우 사(絲)칩함량(含量) 3%에서 톱밥대조)對照)보드보다 높은 강도를 나타냈으나, KS F 3104 의 파티클보드 100타입 기준(基準) 값인 80 kgf/$cm^2$에 훨씬 못 미쳤다. 그러나 비중(比重) 0.63 구성(構成)보드에서 함량(含量) 6%의 길이 1.5cm 사(絲)칩 구성과 함량(含量)3% 의 모든 사(絲)칩 길이로 구성한 보드, 그리고 비중(比重) 0.72의 모든 사(絲)칩 구성보드는 KS F 기준값을 훨씬 상회(上廻) 하였다. 2층구성(層構成)보드의 휨강도는 톱밥대조(對照)보드보다도 사(絲)칩구성의 경우 모두 낮았으며 단층구성(單層構成)보드의 휨강도보다도 낮은 값을 나타냈다. 3층구성(層構成)보드의 휨강도는 사(絲)칩 함량(含量) 9% 이하(以下)의 길이 1.5cm 구성보드는 모두 톱밥대조(對照)보드보다 높은 값을 나타냈으며 KSF 기준값을 훨씬 상회(上廻) 하였다. 4. 배향사구성(配向絲構成) 톱밥보드의 경우(境遇), 배향간격(配向間隔)이 좁은 0.5cm에서 가장 높은 휨강도를 나타냈으며, 배향간격이 보다 넓은 1.0cm 와 1.5cm 구성(構成)에서는 휨 강도가 0.5cm 간격 보다 낮았다. 그러나 배향사구성(配向絲構成) 톱밥보드는 모두 톱밥대조(對照)보드 보다 높은 휨강도를 나타냈다. 5. 사(絲칩) 배향사(配向絲) 구성 보드의 휨강도는 거의 대부분(大部分)의 구성보드에서 톱밥대조(對照)보드보다 높은 값을 나타냈으며 KSF 기준값을 훨씬 상회(上廻) 하였다. 특(特)히 배향간격이 좁고, 길이가 긴 사(絲)칩으로 구성한 보드의 휨강도가 높은 값을 나타냈다. 그리고 사(絲)칩을 배향사(配向絲)와 혼합(混合) 구성(構成)할 때 배향사의 간격이 넓어짐에 따라 톱밥과 배향사(配向絲)만으로 구성한 보드보다도 휨 강도가 높아지는 현상(現象)이 나타났다. 6. 단층(單層), 2층(層) 및 3층(層) 구성(構成) 보드의 탄성계수는 대부분(大部分) 톱밥대조(對照)보드 보다 낮은 값을 나타냈다. 그러나 배향사(配向絲) 구성(構成) 톱밥보드에 있어서는, 배향 간격이 0.5, 1.0, 1.5crn로 됨에 따라서 톱밥대조(對照)보드보다도 각각(各各) 20%, 18%, 10% 탄성계수가 증가(增加)되었다. 7. 사(絲)칩 배향사(配向絲) 구성(構成) 보드의 탄성계수(彈性係數)는 배향간격 0.5crn, 1.0cm 및 1.5crn에서 거의 모두 톱밥대조(對照)보드보드보다도 훨씬 높은 값을 나타냈다. 그리고 함량(含量)9% 이하(以下)에서 사(絲)칩길이를 0.5cm이상(以上)으로 구성하였을 때 배향사(配向絲)만을 구성한 톱밥보드보다도 탄성계수가 높아지는 현상(現象)이 나타났는데, 배향(配向)간격이 좁은 경우 사(絲)칩결체(結締)에 의(依)한 탄성계수(彈性係數) 증가효과(增加效果)가 컸다. 8. 사(絲)칩 혼합(混合) 단층구성(單層構成) 보드의 박리저항(剝離抵抗)은 톱밥대조(對照)보드 보다 모두 낮았다. 그러나 비중(比重) 0.63의 사(絲)칩 구성보드는 KS F 3104의 100타입 기준 값인 1.5kgf/$cm^2$를 모두 상회(上廻) 하였고, 비중(比重) 0.72의 사(絲)칩 구성보드는 200타입의 기준값 3kgf/$cm^2$를 상회(上廻)하는 박리저항(剝離抵抗)을 나타냈다. 2층(層), 3층(層) 및 배향구성(配向構成)도 거의 모두 200타입의 기준값 3kgf/$cm^2$를 상회(上廻) 하였다. 9. 단층구성(單層構成)보드의 나사못유지력(維持力)은 사(絲)칩을 혼합 구성한 경우, 대체(大體)로 톱밥대조(對照)보드보다도 낮은 값을 나타냈다. 그러나, 2층(層) 및 3층구성(層構成)보드에서는 사(絲)칩 구성(構成)에 따른 감소경향(減少傾向)이 나타나지 않고 대체로 고른 나사못 유지력을 나타냈다. 또한, 사(絲)칩 배향사(配向絲) 구성(構成)보드에서는 사(絲)칩함량(含量) 9% 이하(以下)에서 거의 모두 톱밥대조(對照)보드 보다도 높은 나사못 유지력을 나타냈다.

  • PDF