• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2013

The commercial rearing of polyphagous Indian tasar silkworm, Antheraea mylitta Drury being practiced on naturally grown primary food plants like Terminalia arjuna, (Arjun) Terminalia tomentosa (Asan), and Shorea robusta (Sal) available in the tropical forests of central India, at times, is seriously affected by the disease- Pebrine, caused by Nosema sp., a microsporidian pathogen. The present investigation on comparative larval, silk gland weight and also cocoon parameters in Pebrine-free and Pebrine-infected ecorace of tasar silkworm Antheraea mylitta Drury (Daba TV), illustrates the tasar silkworm larvae infected with pebrine disease causing heavy losses to the economy of the silk industry.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.52-60
• /
• 2009

Joyangru, which is located in Woodo mountain in Chuncheon, Korea, was a gate tower of Monsogak. There are little historical records about Joyangru except of the 20th-century records. To study about Joyangru history, a dendrochronological analysis was conducted. We identified also the species of woods, We took 87 samples of wood elements for the species analysis and 13 samples for the dendrochronological analysis. We found 78 hard pines(Diploxylon), 4 Douglass-fir, 3 exotic hard pines(Pinus ponderosa type) and 1 Shorea sp.(Dipterocarpaceae). In the dendrochronological analysis, 2 floor flames were dated in 1887 (with complete sapwood) and 2 beams in 1884. We concluded that Joyangru was reconstructed just after 1888, most likely in 1890 together with Monsogak.

• Journal of Mushroom
• /
• v.2 no.3
• /
• pp.157-162
• /
• 2004

The objectives of this experiment were to study the growth and development of fruiting body of the two Ganoderma lucidum isolates on log of the soft wood Paraserianthes falcataria and the hard wood Shorea sp., and determination of organic germanium and crude ganoderic acid content of the fruiting body produced. The two Ganoderma lucidum isolates used were one Indonesian native (Indonesia isolate) and another isolate was purchased from Fungi Perfecti, USA (commercial isolate). The development and quality of the primordium and fruiting body of the mushroom, in general, were influenced by the isolates used. The types of wood, however, had no effect on the quality of the primordium and fruiting body produced. The Indonesian isolate produced better fruiting body compared to that of the commercial isolate. The development of fruiting body from primordium, however, was low for the two isolates tested. In general, only about one third of the primordium developed further into mature fruiting bodies, except for the commercial isolate grown on the soft wood medium in which more than 60% of the primordium developed into mature fruiting body. Apart from producing normal fruiting body, the commercial isolate also produced an abnormal one, which had a white mature pileus, whereas the normal one was brownish red. The organic germanium concentration of the fruiting body produced on the hard wood, in general, was higher than that of grown on the soft wood. The fruiting body from commercial isolate had higher organic germanium concentration compared to that of Indonesian isolate in both wood types. The two isolates used, however, had almost the same value of the crude ganoderic acid concentration in both types of wood tested. The Indonesian isolate had higher total yield of both organic germanium and crude ganoderic acid of the fruiting body produced compared to that of the commercial isolate.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.2
• /
• pp.6-15
• /
• 1998

A total of forty five-ply, 30- by 30-cm lauan and larch plywood sheets were manufactured in the laboratory using commercial urea and phenol resin adhesives; half of these sheets were treated with fresh concrete. Each sheet was carbonized for 2, 4, and 6hours at $400^{\circ}C$, $600^{\circ}C$, and $750^{\circ}C$, respectively, and their physical properties were measured. The yie1d of charcoal decreased as carbonization temperature and time increased. Charcoal yield was greater in plywood than in veneer, and slightly greater in plywood treated with concrete compared to untreated plywood. Plywood manufactured with phenol resin adhesive had higher pH, higher equilibrium moisture content (EMC), and greater adsorption of methylene-blue dye compared to plywood manufactured with urea resin. For concrete-treated plywood, pH was greater than 10 even when the sheets were carbonized for 2hours at $400^{\circ}C$. Although the EMC of the phenol resin plywood was higher than that of the urea resin plywood, EMC of the phenol resin was lower than that of the urea resin. The larch phenol resin plywood that was carbonized for 6 hours at $750^{\circ}C$ adsorbed more methylene-blue than did the commercia1 wood-based activated charcoal as a result of total pore volume and surface area.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.52-61
• /
• 1991

In this paper, the difference of the property of absorption and desorption for five species in semi-steady state are studied. The species used are listed in Table 1 and the dimension of specimen was $8\times8{\times}T$(Tangential direction)cm and tested in various conditions. A change of average moisture content with time were measured in each cycles. The results obtained are summarized as follows. When the relative humidity in air was maximum or minimum, the distribution of moisture In wood of all specimens were illustrated by exponential curves of decrease or increased from lace 10 center of wood. From the consideration of coefficient of decrease(C), the amount of moisture change of spruce was larger than the others. The pheonomenon was considered no relation to the specific gravity in air dry, but the wood structures. The velocity of the absorption and desorption for species decreased in the order spruce(Picea sitchensis) neodobam(Fagus crenata), solsong(Tsuga heterophylla), meranti(Shorea sp.) and kaesoo(Cercidiphyllum japoicum). In case of constant temperature and water vapor pressure is changed. the amount of absorbed moisture was larger than that of constant water vapor pressure and temperature vaned. In this fact, it is considered that the property of sorption of wood is strongly influenced by vapor pressure gradient than temperature gradient.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.1-41
• /
• 1988

For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.