• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2003년도 추계학술발표대회(하)
• /
• pp.605-608
• /
• 2003

신발의 디자인과 설계는 기술의 부족으로 과거 수십년 동안 3차원 실물을 대상으로 직접 이루어지지 못했다. 불과 몇년 전까지만 해도 신발 설계는 신발모형을 본뜬 근사적인 2차원 Last상에서 숙련된 전문 신발 디자이너의 손에 의해서만 가능한 일이었으나 최근에는 컴퓨터 S/W와 그래픽스 기술의 빠른 성장에 힘입어 3차원 Last를 대상으로 직접 신발을 설계하는 기술들이 개발되어 보다 효율적인 신발 설계가 가능하게 되었다. 그러나 아직 국내에서는 이러한 기술에 대한 연구, 개발은 미미한 수준이다. 본 논문에서는 3차원 Last를 2차원 평면으로 펼쳐서 양 차원간의 기하정보를 적절하게 Mapping 시키고 3차원 Last상에 직접 스타일 라인을 생성, 설계한 다음 이를 인터렉티브하게 2차원 패턴으로 생성해내는 3차원 신발 캐드 시스템을 구현 하였다.

• 제어로봇시스템학회논문지
• /
• 제9권5호
• /
• pp.368-373
• /
• 2003

This paper presents a cost-effective 3D foot scanner system that provides the 3-dimensional point cloud foot data to design the custom footwear. To measure the 3-dimensional point cloud data of the foot, a CCD camera, a Non-Gaussian laser line projector and optical triangulation method are employed. Furthermore, the integrated system employs a measurement base, a frame grabber, a CCD moving cart, a stepping motor and a computer. The measurement result is saved as 3D dxf format and it could be converted to 2D essential data fer a shoe design. The experimental results demonstrate that the proposed system have the decent resolution of 1mm which is enough for last and shoe design.

• 대한의용생체공학회:의공학회지
• /
• 제29권4호
• /
• pp.316-322
• /
• 2008

The purpose of this study was to investigate muscle activation of lower extremity such as rectus femoris, tibialis anterior and soleus according to 0cm(bare foot), 4cm and 7cm heel height of shoe on the rocking surface in older women. 20 older women who did not have any lower musculoskeletal and neurological disorders in the past were participated in this study. Each subject was standing for 15 seconds on the level 8 of Biodex Stability System (BSS) while wearing 4cm and 7cm heel height shoes including bare foot. Electromyography was used to measure muscle activation of lower extremity, and the muscle activation was expressed as a percentage of maximal voluntary isometric contraction (% MVIC). We measured % MVIC of three muscles during 5 seconds except for the first 5 seconds and last 5 seconds. SPSS 12.0 program was used for this study. Repeated one-way analysis of variance(ANOVA) was performed to compare the significant difference among the muscles of lower extremities according to heel heights of shoe on the rocking plate. % MVIC of each muscle such as rectus femoris, tibialis anterior and soleus regarding heel heights of shoe had statistically significant differences (p<0.05). The results of contrast test were as follows; 1) % MVIC of rectus femoris had significant differences between barefoot and 4cm, and barefoot and 7cm. 2) % MVIC of tibialis anterior had significant differences between barefoot and 4cm, barefoot and 7cm, and 4cm and 7cm. 3) % MVIC of soleus had significant differences between barefoot and 7cm, 4cm and 7cm. The results indicate that all commonly responsive muscle on the conditions of barefoot, 4cm, and 7cm shoe height on the rcoking surface is tibialis anterior muscle. We found out that the more heels of shoe high, the more muscle activation increases. High-heeled shoes above 7cm remarkably increase the muscle activation of lower extremity and may result in muscle fatigue. Thus, these shoes may summate risk factors of falls in older women. We can acknowledge that the heels above 4 cm affect each muscle activation in lower extremity on the rocking surface.

• 한국지능시스템학회논문지
• /
• 제14권7호
• /
• pp.871-877
• /
• 2004

본 논문은 맞춤형 신발제작을 위하여 신발에 필요한 화형제작용 데이터를 3차원 측정 장치를 통해 획득한 발의 형상을 인공지능 기법을 기반으로 하는 최적화된 형상을 복원하는 방법을 제시하고자 한다. 본 연구를 위해 개발된 시스템은 PC를 기반으로 하는 기존의 3차원측정 방식을 이용하여 상, 하, 좌, 우로 각각 장착된8대의 CCD 카메라와 4대의 laser를 통해 화형 및 발의 형상 데이터를 획득한다. 획득된 데이터들은 인공지능 기법을 이용한 영상처리 알고리즘으로 처리되며, 처리 결과는 기존의 지능 기법을 도입하지 않은 시스템에 비해 노이즈제거 특성이 향상되었고, 후처리과정을 간소화 할 수 있다. 따라서 본 논문에서는 3차원 측정을 위해 하드웨어적인 부분과 이를 제어하기 위한 소프트웨어 및 GUI로 전체 시스템을 구성하고, 본 논문에서는 데이터 처리용 소프트웨어에서 입력영상의 전처리 과정 중 영상의 이진화 단계에서 임계값을 결정하기 위하여 신경망을 사용하였으며, 이에 대한 결과를 제시하고자 한다.

• Physical Therapy Rehabilitation Science
• /
• 제4권2호
• /
• pp.115-120
• /
• 2015

Objective: To examine the effects of different shoe weights on lower leg muscle fatigue when walking by electromyographic (EMG) analysis due to the most effective weight for loading not being established. Design: Cross-sectional study. Methods: Thirty healthy university students (15 male, 15 female) were enrolled and randomly assigned into three conditions, which included wearing athletic shoes with an addition of 300 g, 500 g, and 1,000 g weights respectively. Prior to walking, all subjects were instructed to sit in a chair for 10 minutes. All subjects walked at a speed of 3.6 m/s on a treadmill for 20 minutes without rest. EMG measurements were taken using the median power frequency to assess for the effect of the different weight of shoes on muscle fatigue of the soleus, gastrocnemius, and tibialis anterior while walking on a treadmill in an upright posture. EMG measurements were taken during the first and last 30 seconds of walking. Results: In terms of muscle fatigue, for the soleus, the median power frequency was significantly lower with 1,000 g compared with 300 g and 500 g (p<0.05). For the tibialis anterior, the median power frequency was significantly lower with 1,000 g than 300 g and 500 g (p<0.05). For the gastrocnemius, the median power frequency was significantly lower with 1,000 g compared with 300 g (p<0.05). Conclusions: Increased shoe weight increases soleus, gastrocnemius, and tibialis anterior muscle fatigue during ambulation.

• 한국운동역학회지
• /
• 제29권3호
• /
• pp.167-172
• /
• 2019

Objective: The aim of this study was to investigate the effect of midsole hardness of running shoe on muscle fatigue and impact force during distance running. Method: Ten healthy college recreational runners who were performing distance running at least three times a week participated in this experiment. They were asked to run for 15 minutes in the treadmill at 10 km/h with running shoes having three different types of midsole hardness (Soft, Medium, Hard). EMG signal and insole pressure were collected during the first and last one minute for each running trials. Data were analyzed using a one-way analysis of variance (ANOVA) with repeated measures. Results: Midsole hardness did not affect the consistency of stride length. For the median frequency of the EMG signal, only VL was affected by midsole hardness; that of medium was greater than other midsoles (p<.05). The loading rate of impact forces increased by midsole hardness (p<.01). Conclusion: Although soft midsole could attenuate impact forces at heel contact, it might have a negative effect on the fatigue of muscle which could decelerate the body after heel contact. Therefore, it is necessary to select the optimum hardness of midsole carefully for both reduction impact forces and muscle fatigue.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 춘계학술대회 논문집
• /
• pp.262-270
• /
• 2001

본 연구의 목표는 새로 개발된 구두골을 평가하여 보다 편리하고 기능성이 향상된 구두를 제작할 수 있는 한국형 구두골(shoelast)을 설계하는 것이다. 구두의 적합성에 영향을 주는 인자를 찾아내고, 이들에 대한 평가 방법을 개발하여 인간공학 실험을 실시하였다. 새로 개발한 구두골은 남.여 각각 2 개의 타입(type)으로 10 명의 평가자에 의하여 단기간 (1 주일)의 착화감 평가가 이루어졌다. 인체측정치와 발 부위의 상관성 평가, 피험자 각각에 대한 시계열분석의 결과를 종합하여 두 타입의 구두골에 대한 문제점을 파악하고, 그 개선점을 도출하였다. 이 결과를 바탕으로 한국형 구두골(shoelast) 설계 치수를 설정하였다. 본 연구에서는 얻어진 결과는 구두 제작 공정에 직접 사용될 수 있으며, 구두의 쾌적성 및 기능성 향상에 크게 기여할 것으로 기대한다.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.88-95
• /
• 2008

In the paper, the permanent magnet synchronous generator of 1.5[MW] output power which is driven directly without gear system is designed by conventional magnetic equivalent circuit method and analyzed by finite element method. We analyzed the characteristics of generator like no load, rated load, short circuit condition and demagnetization of permanent magnet in order to verify the design results by magnetic circuit method. The last, the analysis results of two kinds of rotor types are compared with each other. Especially the THD(total harmonic distortion) of output voltage is examined for the comparison.

• 산업경영시스템학회지
• /
• 제11권17호
• /
• pp.47-54
• /
• 1988

Korean National Railroad(K.N.R) playing a important role in land transportation gives us many problems to solve considering proper management of National Budget and development of the state of operation by maintaining train parts rationally as public services. According this study is to show inventory provision system for deciding the safety inventory level as the better rational method. Bibliography for this study is limited to only three kinds of seven brakes-shoe which is produced by T workshop in Korean National Railroad. To reduce the holding cost coming from the want of the stock and shortage cost of the stock expected. This study is to present a ratio of shortage on the stock permitted for the last definite period and the demand result forecast per month.

• 한국운동역학회지
• /
• 제29권3호
• /
• pp.197-204
• /
• 2019

Objective: The purpose of this study was to identify the effect of high-heels (HH) modification on metatarsal stress in female workers. Method: Seven females who work in clothing stores ($heights=160.4{\pm}3.9cm$; $weights=47.4{\pm}4.1kg$; $age=31.3{\pm}11.1yrs$; $HH\;wear\;career=8{\pm}6.5yrs$) wore two types of HH (original and modified). The modified HH had been grooved with 1.5 cm radius and 0.2 cm depth around the first metatarsal area inside of the shoes using the modified shoe-last. Participants were asked to walk for 15 minutes on a treadmill and to stand for 10 minutes with original and modified HH, respectively. Kinetics data were collected by the F-scan in-shoe system. After each test, participants were asked to rate their perceived exertion using the Borg's 15-grade RPE scale and interviewed about their feeling of HH. Nonparametric Wilcoxon signed-rank test and effect size (Cohen's d) were used to determine the difference of the variables of interest between the original and modified HH. Results: In the present study, modified HH of the peak contact pressure of 1st metatarsal (PCP) left, PCP right, pressure time integral (PTI) left, peak pressure gradient (PPG) left during standing and PPG right during walking are greater than original HH. And even it didn't show statistically significant, the average in all pressure values of modified HH showed bigger than original HH. It surmised to be related to awkward with modified HH. Even though they said to feel the comfortable cause of big space inside of HH in the interview, they seemed to be not enough time to adapt with new HH. So their walking and standing postures were unstable. Conclusion: Modified the fore-medial part of HH can reduce the stress in the first metatarsal head and big toe area during standing and walking.