• The Research Journal of the Costume Culture
• /
• v.21 no.6
• /
• pp.967-973
• /
• 2013

During high speed sewing, the needle thread is exposed to dynamic loading, short strike loading, inertia forces, friction, rubbing, force of check spring, bending, pressure, friction, impact, shock and thermal influence. The dynamic thread loading/tension alters throughout the stitch formation cycle and along its passage through the machine. The greatest tensile force occurs at the moment of stitch stretching, when the take up lever pulls for required thread length through the tension regulator. These stresses act on the thread repeatedly and the thread passes 50-80 times through the fabric, the needle eye and the bobbin case mechanism, before getting incorporated into the seam, which result in upto 40% loss in tensile strength of the sewing thread. This damage in the sewing thread adversely affects its processing and functional performance. In this paper, the contribution of dynamic loading, passage through needle and fabric, and bobbin thread interaction in the loss in tensile properties has been studied. It is observed that the loss in tensile properties occurs mainly due to the bobbin thread interaction. Dynamic loading due to the action of take up lever also causes substantial loss in tenacity and breaking elongation of cotton threads.

• Journal of The Korean Astronomical Society
• /
• v.47 no.6
• /
• pp.219-233
• /
• 2014

The main site of dust formation is believed to be the cool envelopes around AGB stars. Nearly all AGB stars can be identified as long-period variables (LPVs) with large amplitude pulsation. Shock waves produce by the strong pulsation and radiation pressure on newly formed dust grains drive dusty stellar winds with high mass-loss rates. IR observations of AGB stars identify various dust species in different physical conditions. Radio observations of gas phase materials are helpful to understand the overall properties of the stellar winds. In this paper, we review (i) classification of AGB stars; (ii) IR two-color diagrams of AGB stars; (iii) pulsation of AGB stars; (iv) dust around AGB stars including dusty stellar winds; (v) dust envelopes around AGB stars; (vi) mass-loss and evolution of AGB stars; and (vii) contribution of AGB dust to galactic environments. We discuss various observational evidences and their theoretical interpretations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.75-76
• /
• 2015

This study has examined the impact resistance and blast resistance characteristics of HPFRCC as a research on impact resistance and blast resistance characteristics using high volume mortar and high velocity projectile for evaluating the protection performance of actual buildings as small quantity experiment of laboratory conditions is performed although there was an instance of performing research on mortar that has reinforced fiber followed by the rise of problems on the damage of human life and buildings created due to explosion and shock. As a result, the destruction loss area and depth have decreased in case of the surface compared to the rear side. As tensile strength and tenacity have increased with the increased fiber replacing ratio, a tendency of destruction loss area and depth getting decreased was shown as the impact resistance has increased.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.678-683
• /
• 2000

The one-dimensional performance model of a torque converter has been widely used to analyze and predict the performance and dynamic behavior of a torque converter. But this model doesn't include the information of the operating fluid properties. Therefore, to precisely predict dynamic performance of a torque converter, the effect of operating conditions must be considered through experimental coefficients such as friction loss coefficient and shock loss coefficient. And these coefficients cannot be achieved without experiments or internal flow analysis. In this study, the effects of varying material properties of operating fluid according to various operating temperatures are clarified with flow analysis of a torque converter. And these results are verified by comparing with those of performance experiment.

• Women's Health Nursing
• /
• v.3 no.1
• /
• pp.28-38
• /
• 1997

Recently, the birth rate of congenitally anomalic babies is increasing in Korea. But there are few studies and articles in nursing field. So nurses are having difficulties in caring those mothers. This study is to reveal experiences of the mothers with congenitally anomalic babies. Subjects were six and data were gathered by interviews. Data were analyzed by Giorgi's method. Mother's responses were organized into five categories-shock, sadness, expectation, attribution and loss of confidence on future pregnancies. Loss of confidence on future pregnancies were categories which were not found in foreign articles. Based on the result of this study, author recommend that another studies which deal only same anomaly will be done, and genetic counseling system will be organized in hospitals.

• Journal of Mechanical Science and Technology
• /
• v.14 no.4
• /
• pp.456-465
• /
• 2000

An experiment was conducted to investigate the aerodynamic losses of high pressure steam turbine nozzle (526A) subjected to a large range of incident angles ($-34^{\circ}\;to\;26^{\circ}$) and exit Mach numbers (0.6 and 1.15). Measurements included downstream Pitot probe traverses, upstream total pressure, and end wall static pressures. Flow visualization techniques such as shadowgraph and color oil flow visualization were performed to complement the measured data. When the exit Mach number for nozzles increased from 0.9 to 1.1 the total pressure loss coefficient increased by a factor of 7 as compared to the total pressure losses measured at subsonic conditions ($M_2<0.9$). For the range of incidence tested, the effect of flow incidence on the total pressure losses is less pronounced. Based on the shadowgraphs taken during the experiment, it' s believed that the large increase in losses at transonic conditions is due to strong shock/ boundary layer interaction that may lead to flow separation on the blade suction surface.

• Journal of Trauma and Injury
• /
• v.28 no.4
• /
• pp.248-255
• /
• 2015

Purpose: study of the mutual influence of the individual anatomical regions damage in patients associated with falls from heights. Methods: 561 medical reports of patients associated with falls from heights admitted to Republican Research Center of Emergency Medicine (RRCEM), in period of 2010-2013 yy, were analyzed retrospectively. Patient's age range was from 15 to 89. Treatment of these patients held in three stages: period of acute disorders of vital functions; relative stabilization period; stabilization of vital functions. The scope and content of medical diagnostic procedures performed on pre-hospital and intensive care stages. The severity of each injury was scored according to the AIS scale, the total severity of lesions was scored by points due to ISS. Digital material is treated by methods of mathematical statistics. Results: Falls from heights leads to associated injuries for 4 times more than isolated trauma, and increases according to height of fall and falling surface. Patients with TBI+chest trauma, are most serious contingent that has highest mortality and complications (36.8%). TBI+musculoskeletal system trauma are characterized by high blood loss, traumatic shock and fat embolism, forming a vicious circle. Conclusion: in patients associated with falls from heights clinical manifestations of injuries mutual aggravation syndrome will be seen. TBI leads to complication of chest trauma, delayed diagnostics of abdominal and chest trauma, aggravation of coma condition. Developing of high blood loss and fat embolism in musculoskeletal system trauma leads to shock and pulmonary embolism, which increases probability of death in the presence of abdominal or chest trauma, but abdominal trauma or chest trauma has no significant effect on the severity of the musculoskeletal system trauma.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.5
• /
• pp.297-308
• /
• 2022

Most air-breathing aircraft operated in the hypersonic region are equipped with a scramjet engine. In a scramjet engine, a shock wave generated at an inlet acts as a compressor for a general gas turbine engine instead, so total pressure loss caused by the shock wave is considered very important. In this study, to minimize total pressure loss, a method of designing an external compression inlet using isentropic compression surface was proposed, and an external compression inlet with 3-deflection angles and Busemann inlet were designed under the same conditions. After that, through computational analysis, the performance characteristics at off-design conditions were compared. Each inlet shape was truncated according to the length of the 3-ramp external compression inlet, and the boundary layer correction was performed. The isentropic external compression inlet showed superior performance at the design point, but under the off-design conditions, its performance was degraded compared to the 3-ramp external compression inlet.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.676-681
• /
• 2001

We usually divide the noise of exhaust system into pulsation noise and flow noise. Pulsation noise is the shock wave to occur when the burning gas of low pressure emits and include harmonic having basic frequency as the exhaust cycle of engine. Flow noise is the noise that is produced when gas flow emits into the atmosphere through the pipe and has the character of frequency like pink noise which has the high level of high frequency component. A muffler is divided into reflective type and absorptive type. We usually use the muffler compounding the property of them. In this study, it is the case of transfer matrix method that a muffler is compounded to analyze the elements of each section according to sound wave's proceed direction. But we use simple model. So, we use finite element method that takes short time to analyze. Acoustic analysis gives us transfer matrix to use FEA of SYSNOISE and we use STAR-CD for fluid analysis. We made database that is based on analytical results about the muffler of expansion type, extended type, offset type, reverse type, and perforated type and developed the muffler design system to perform work efficiently.

• The Korean Journal of Emergency Medical Services
• /
• v.24 no.2
• /
• pp.111-121
• /
• 2020

Purpose: The purpose of this study was to compare visual blood loss estimation and subjective emergency according to clothing color. Methods: This is a quasi-experimental study which involved the use of mock bleeding patients wearing different colors tops. Results: Differences in visual estimates according to clothing color were significant in both paramedic students (F=6.69, p=.002) and the general department students (F=20.92, p=.000). When looking specifically at the accuracy of visual estimates, the paramedic students group tended to underestimate (50% white, 62.5% black, 32.5% yellow) the actual blood volume in all experimental conditions. On the other hand, the general department group tended to overestimation (45% white, 40% black, 67.5% yellow). The subjective emergency was also found to differ between paramedic students (F=13.58, p=.000) and general department students (F=9.67, p=.000). Conclusion: Paramedics treating bleeding patients at pre-hospital stages need to pay attention to blood loss estimations depending on clothing color, a factor not to be neglected or underestimated.