• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.627-632
• /
• 2002

The paper considers acoustic analysis of the shock absorbing muffler within a rotary compressor. The internal space of the compressor is modelled as a combination of cavities and pipes. A simple one-dimensional impedance approach is used fur the acoustic analysis in the low frequency range, with ignoring the effects of gas flow and temperature gradients that are closely related to power efficiency of the compressor. Using the similarity between the vibration isolator and the shock absorbing muffler, the source strength transmissibility is newly proposed as a performance measure of the muffler and its validity is supported by power analysis. Some Important muffler design rules obtained are; (1) a muffler cavity and its opening throat should be used as a pair, (2) a long thin throat is desirable for high frequency noise isolation, (3) a large muffler cavity should be used with care since it shortens the working frequency range of the muffler. The rules were applied to redesign a compressor muffler currently in use, and a significant improvement was achieved by simply attaching a throat to the outlet holes of the muffler.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.375-380
• /
• 2004

Seismic Isolation and Shock/vibration Control Laboratory has performed the National Research Laboratory(NRL) project, 'Design and Application of Control Devices against Earthquake/Shock/Vibration'. In this project, the prototypes of the vibration control devices for structural control against earthquake and wind were developed and verified their performances. And also, the computer programs were developed for the seismic response analysis and the optimum design of the base-isolated structures with vibration control devices. This paper introduces the developed vibration control devices and computer programs.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.342-347
• /
• 2015

The launcher pod for missiles capable of carrying a range of different warheads has been designed to be mounted on the tracked vehicle of the hybrid weapon system (HWS). In the development of this launcher pod, its structure was designed to be resilient to damage caused by shock and vibration, as well as preventing assembly errors due to the spring-back of the main composite cover and interfacing parts. This study investigated the design of the newly developed launcher pod, with its hybrid composite-metal structure, through simulation and experiment. Both simulation and actual experiments showed that the structure of the launcher is resilient to vibration and shock. The launcher pod was also subjected to vibration and shock tests to verify its performance.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권1호
• /
• pp.31-41
• /
• 2011

A strut mount is an important part of vehicles which reduces the vibration and the impact transmitted from the wheels while supporting a shock absorber and a coil spring. Rubber compounding, shape design, and process design technologies are important components to improve the functionality of a strut mount such as durability, static, dynamic, and torsional characteristics. Among them the rubber compounding technology is the key technology which dominates the quality of a strut mount. In this study a strut mount with high reliability has been developed by adopting new rubber compounding and improving the shape of the inner plate and the isolator. Through the tests for prototypes it has been shown that the durability has been improved more than 2.5 times, from about 60,000 cycles to about 160,000 cycles.

• 한국소음진동공학회논문집
• /
• 제23권8호
• /
• pp.759-769
• /
• 2013

기동중인 헬리콥터는 공기역학적인 현상에 의하여 발생하는 불규칙 진동과 회전날개의 작동으로 인한 정현파 진동이 합성되어 발생하는 진동, 작업 및 착륙 시 발생하는 충격, 그리고 갑작스런 기동 시 발생하는 가속도와 같은 동적 하중에 노출 된다. 이때 발생하는 진동과 같은 동적 하중은 기체내부로 전달되어 헬리콥터운용에 필요한 전자장비를 가진 한다. 과거에 이러한 현상을 최소화하기 위하여 진동크기 감쇠시키기 위한 완충기를 전자장비의 장착대에 적용하여 왔다. 그러나 헬리콥터의 경우, 저주파에서 정현파 가진이 발생하므로 완충기 적용은 오히려 장착 플레이트 및 전자장비 부품의 파손을 발생시킬 수 있다. 이 연구에서는 완충기를 제거한 장착대를 동적 하중에 강건하며 전자장비에 전달되는 진동크기를 최소화 하도록 설계하였다. 완충기를 제거한 장착 대를 적용 시, 무게와 부피를 획기적으로 줄일 수 있으며 전자장비를 기체에 체결하는 나사 수가 적어짐에 따라 체결작업에 필요한 시간이 감소되는 장점을 갖는다. 최적화 해석에 적용되는 동적 하중을 선정하기 위하여 진동, 충격, 가속도하중을 비교 분석하여 가장 결정적인 동적 하중인 진동에 의한 하중을 선정하였다. 전체모델 유한요소 해석을 통하여 전자장비의 동적 거동을 분석하고 최적화 해석에 필요한 단순화 모델을 구축하였으며, 모달 테스트를 통해서 동특성을 검증하였다. 위상 최적화를 적용하여 강성대비 체적비가 큰 장착대의 형상을 도출한 후 고유진동수, 응력을 제약조건으로 무게가 최소화 되도록 하는 파라미터 최적화를 수행하여 장착대의 최종 형상 및 치수를 결정하였다. 개선모델은 체적 및 질량이 약 13 % 감소하였으며 사용시간은 규격대비 9.2배 증가하였다. 마지막으로 최적화된 장착대를 운용중인 실제 장비에 적용하여 진동환경에 대한 안정성을 평가하였다.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.103-108
• /
• 2013

The operation of a Doppler wind LIDAR in a mobile environment is very sensitive to shocks and vibrations, which can cause critical failures such as misalignment of the optical path and damage to optical components. To be able to stabilize the LIDAR and to perform wind field measurements in motion, a shock absorption and vibration isolation system was designed and implemented. The performance of the vehicle-mounted Doppler wind LIDAR was tested in motion, first in a circular test route with a diameter of about 30 m and later in regular expressway traffic. The vibration isolation efficiency of the system was found to be higher than 82% in the main vibration area and shock dynamic deflection was smaller than maximal deflection of the isolator. The stability of the laser locking frequency in the same mobile environment before and after the vibration isolation system installation was also found to be greatly improved. The reliability of the vibration isolation system was confirmed by good results of the analysis of the LIDAR data, in particular the plane position indicator of the line of sight velocity and the wind profile.

• 한국소음진동공학회논문집
• /
• 제13권2호
• /
• pp.132-143
• /
• 2003

Viscoelastic components for vibration isolation or shock absorption in automobiles, machines and buildings are often subject to a high level of static deformation. From the dynamic design point of view, it is requisite to predict dynamic complex stiffness of viscoelastic components accurately and efficiently. To this end, a systematic procedure for complex modulus measurement of the viscoelastic material under large static deformation is often required in the industrial fields. In this paper, dynamic test conditions and procedures for the viscoelastic material under small oscillatory load superimposed on large static deformation are discussed. Various standard test methods are investigated in order to select an adequate test methodology. The influence of fixed boundary condition in the compression tests upon complex stiffness are investigated and an effective correction technique is proposed. Then the uniaxial tension and compression tests are performed and its results are compared with analysis results from conventional constitutive models.