• Journal of Preventive Medicine and Public Health
• /
• 제29권1호
• /
• pp.91-102
• /
• 1996

Low back pain patients and controls of shipyard workers were surveyed between June 1995 and September 1995 to identify risk factors of industrial low back pain. The patients were 17 male workers who had got medical treatment for over 3 days because of industrial back pain. Controls were 51 male workers who had not have musculoskeletal disorder for one year before the survey. By univariate analysis, the workers who did overtime work 4 times or more for the last 2 weeks showed odds ratio of 3.67 on low back pain with the workers who did less overtime work. Carrying heavy materials was also associated with the low back pain and the odds ratio increased with the increase of carrying weight. Work space and work posture were not associated with the low back pain significantly. The welder had higher odds ratio than the other workers on low back pain. The duration of employment and job satisfaction did not affect the risk of low back pain. Multiple logistic regression analysis showed that frequency of overtime work for the last 2 weeks and carrying heavy materials among the risk factors were associated significantly with the low back pain. We found that important risk factors of low back pain of shipyard workers are work intensity factors such as overtime work and carrying heavy weight.

• 한국산업보건학회지
• /
• 제28권2호
• /
• pp.200-210
• /
• 2018

Objectives: The purpose of this study is to assess the exposure to ozone and total volatile organic compounds(TVOCs) generated during welding work at a shipyard and recommend respiratory protective equipment(RPE) adequate against these hazards. Method: Ozone was collected for about 30 minutes at two-minutes intervals using a direct reading instrument, specifically an ozone analyzer(Serinus 10, Ecotech, Australia). TVOCs were collected for about 30 minutes at three-minute intervals using a portable GC (Alpha 115, Synspec BV, the Netherlands), and were determined simultaneously by area sampling at the welding plume closest to the welder's breathing zone. The total measurements were 162 for ozone($CO_2$ welding 47, TIG 60, stick 55), and 136 for TVOCs($CO_2$ 65, TIG 50, stick 21). Based on these measurements, a literature survey was conducted to assess the adequacy of RPE. Results: Relative to Korean OEL, measurements above STEL 0.2 ppm were 23.4% for $CO_2$, 63.3% for TIG and 14.5% for stick welding. There were significant differences(p=<0.0001) among welding types. Compared with ACGIH peak exposure of 0.4 ppm for ozone, which is not applied in Korea, $CO_2$ welding exceeded it by 10.6%, TIG by 40.0% and stick by 7.3%. Although it was not feasible to compare them directly since there are no Korean OEL, TVOCs had very high levels similar to the concentrations before moving into a new apartment and about 10-20 times the indoor air quality recommendations for some individual measurements. Conclusions: As ozone removal RPE has been recommended in welding environments for a long time(Lunau, 1967), this fact was demonstrated based on the results of the on-site work environment measurements(ozone and TVOCs). In conclusion, for all welding at a shipyard, gas/vapor and particulate combination RPE are recommended. If this is not possible, it should at least be present for TIG welding.

• 대한조선학회논문집
• /
• 제45권4호
• /
• pp.441-454
• /
• 2008

Shipyard design and equipments layout problem, which are directly linked with the productivity of ship production, is an important issue serving as reference data of production plan for later massive production of ships. So far in many cases, design of a shipyard has been relying on the experienced engineers in shipbuilding, resulting in sporadic and poorly organized processes. And thus, economic losses as well as trials and errors in that accord have been pointed out as inevitable problems. This paper extracts a checklist of major elements to fine tune the shipbuilding yard designing process and the input/output data based on the simulation based shipbuilding yard layout designing framework and methodology proposed in existing researches, and executed initial architecture to develop software that integrates all the relevant processes and designing tools. In this course, both user request and design data by the steps are arranged and organized in the proposed layout design template form. In addition, simulation is done based on the parent shipbuilding process planning and scheduling data of the ship product, shipbuilding process and work stage facilities that constitute shipbuilding yard, and design items are verified and optimized with the layout and equipment list showing optimal process planning and scheduling effects. All the contents of this paper are based on simulation based shipbuilding yard layout designing methodology, and initial architecture processes are based on object oriented development methodology and system engineering methods.

• Safety and Health at Work
• /
• 제1권2호
• /
• pp.124-133
• /
• 2010

Objectives: This study was conducted to develop a model describing the interaction between lifestyle, job, and postural factors and parts of the upper extremities in shipyard workers. Methods: A questionnaire survey was given to 2,140 workers at a shipyard in Ulsan City. The questionnaire consisted of questions regarding the subjects' general characteristics, lifestyle, tenure, physical burden, job control, posture and musculoskeletal symptoms. The overall relationship between variables was analyzed by a structural equation model (SEM). Results: The positive rate of upper extremity musculoskeletal symptoms increased in employees who worked longer hours, had severe physical burden, and did not have any control over their job. Work with a more frequent unstable posture and for longer hours was also associated with an increased positive rate of musculoskeletal symptoms. Multiple logistic regression analysis showed that unstable posture and physical burden were closely related to the positive rate of musculoskeletal symptoms after controlling for age, smoking, drinking, exercise, tenure, and job control. In SEM analysis, work-related musculoskeletal disease was influenced directly and indirectly by physical and job stress factors, lifestyle, age, and tenure (p < 0.05). The strongest correlations were found between physical factors and work-related musculoskeletal disease. Conclusion: The model in this study provides a better approximation of the complexity of the actual relationship between risk factors and work-related musculoskeletal disorders. Among the variables evaluated in this study, physical factors (work posture) had the strongest association with musculoskeletal disorders.

• Journal of Ship and Ocean Technology
• /
• 제5권1호
• /
• pp.1-13
• /
• 2001

As Indonesia determines to increase its marine fishery production, the development of tradi-tional boatyards has to be included in the agenda as it will give the local fishing communities a better chance to compete with large capital intensive fishing companies. It will also spread job opportunities evenly throughout the country instead of concentration fishing vessel con- struction in a few large shipyards located primarily on the highly populated island of Java. However development every single boatyard in indonesia would not only be prohibitively ex-pensive, but it would also create social tensions as the introduced technology would not be immediately accepted by the rural societies whose own traditions are still culturally signif-icant. Both these problems can be reduced by developing a collaborative scheme between traditional boatyards and a larger shipyard. The shipyard, with modern facilities, can develop work packages containing knock down components which are then assembled in the tradi-tional boatyards. The work packages are planned and designed so that every component can be assembled with relatively simple tools. Radical changes can be avoided as new techniques can be introduced gradually, responding to the boatyard\\`s own requirements and aspirations. While this manufacturing procedure is conceptually straightforward its efficient implemen-tation is in practice complicated by the fact that each traditional boatyard has unique char-acteristics in terms of labour resources, technological capability, and transportation links. By developing a computer model to simulate the interaction between the main shipyard and small traditional a computer model to simulate the interaction between the main shipyard and small traditional boatyards work packages can be designed that ensure that activities at all manufacturing locations are efficient.

• 대한조선학회논문집
• /
• 제54권3호
• /
• pp.187-195
• /
• 2017

The operation planning of transports used to move blocks is the one of key factors. Furthermore, reducing the running time through the effective plan contributes to pulling forward the whole logistic process of the shipyard and substantially saving the fuel consumption of itself as well. The past researches of the transporter focused on finding only the shortest distances, so called, Manhattan distance. However, these searching approaches cannot help having the significant difference in the real operational time and distance with the minimum cost approach which considers the speed retardation for turns or safety at the intersection. This study suggests the noble transporter's operational model which could take account of the consuming operational time around the crossroads on the shipyard. Concretely, the proposed method guarantees the minimization of transporters' turns and passage number which are huge burdensome to the operation time and the whole planning of transports with the given period. Resultantly, this paper is willing to explain the appropriateness of our approach, compared with the previous ones.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.510-520
• /
• 2014

Unlike other mass production in small variety, shipbuilding process is a project-based method in single variety, which causes unpredictable volatility in the planning system. In shipyards, series of manufacturing processes from fabrication to erection is sequentially carried out. In order to predict unfavorable changes such as overload or low load of working volume, computerized simulation has been being gradually adopted. The data used in the simulation are processed from the database of the main scheduling and planning system. Thus the quality of those data is very crucial for the meaningful results. Unfortunately, research on the verification of data quality is very rare and hardly known to the authors. In this work, using the database of scheduling and product information system of a large domestic shipyard, the data required for the simulation are qualitatively analyzed and verified.

• 한국의류학회지
• /
• 제34권3호
• /
• pp.518-528
• /
• 2010

This study analyzes the work environment and the work clothes wearing conditions of shipyard painters. In addition to this, three types of experimental painting work clothes were evaluated by painters in terms of the material performance and wearing functions. The findings on the harmful painting work environmental factors were organic solvents, noise, heavy dust, high temperatures, and noxious fumes. The body parts damaged during painting operations were the skin, arms, whole body, and face. In general, the satisfaction with the wearing performance of work clothes for painting was low especially in regards to sweat absorbency, sweat permeability, body protection, covering, and the work motion suitability. The satisfaction with the wearing sense of painting working clothes (regardless of the type of material) was high in the order of movement comfort> sensual comfort> physiological comfort. The satisfaction in overall comfort according to the types of material was high in the order of nylon> SMS nonwoven fabric> SF nonwoven fabric.

• 한국전자거래학회지
• /
• 제19권2호
• /
• pp.75-93
• /
• 2014

본 연구에서는 공리적 설계 방법론을 기반으로 조선소의 블록 물류 운영 시스템을 효과적으로 설계하는 방법을 다룬다. 체계적인 설계를 위하여 블록 물류 운영 시스템의 독립적인 기능 요구를 정의하고 이를 만족시키는 설계 파라미터를 정의한다. 그리고 기능 요구들과 설계 파라미터들 사이의 상관관계를 고려하여 구현 순서를 결정한다. 설계 결과는 IDEF0 모델링을 이용하여 제시하였다. 설계된 시스템은 국내 한 조선소에서 구현되었으며, 현장에 적용되고 있는 사례를 분석하여 함의를 도출한다.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.444-451
• /
• 2015

Lifting lugs are frequently used in shipyard to transport and turn over blocks of ship and offshore structures. As the shipbuilding technology develops, blocks has become bigger and bigger, and block management technology takes a more important role in shipbuilding to enhance the productivity. For the sake of economic as well as safe design of lug structure, more rational design procedure based on the rigorous structural analysis is needed. This study is concerned with the optimum design of T type lug which is frequently used in shipyard. The optimum thickness of lug's main body is to be determined based on the results of non-linear strength analysis. As far as the present results for the present T type lugs having different capacity are concerned, it seems to be necessary to review the current design procedure of lug structure. The present design procedure can be extensively used in design of various types of lug structures used in shipyard.