• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.1
• /
• pp.69-84
• /
• 2018

In order to analyze the characteristics of propeller exciting force, the hybrid grid is adopted and the numerical prediction of KCS ship model is performed for hull-propeller-rudder system by Reynolds-Averaged Navier Stokes (RANS) method and volume of fluid (VOF) model. Firstly, the numerical simulation of hydrodynamics for bare hull at oblique state is carried out. The results show that with the increasing of the drift angle, the coefficients of resistance, side force and yaw moment are constantly increasing, and the bigger the drift angle, the worse the overall uniformity of propeller disk. Then, propeller bearing force for hull-propeller-rudder system in oblique flow is calculated. It is found that the propeller thrust and torque fluctuation coefficient peak in drift angle are greater than that in straight line navigation, and the negative drift angle is greater than the positive. The fluctuation peak variation law of coefficient of side force and bending moment are different due to various causes.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.2
• /
• pp.20-27
• /
• 2008

A moon-pool is a vertical well in a floating barge, drilling ship, or offshore support vessel. In this study, numerical simulation of two-dimensional moon-pool flaw coupled with a ship's motion in waves is carried out using a particle method, the so-called MPS method. The particle method, which is recognized as one of the gridless methods, was developed to investigate nonlinear free-surface motions interacting with structures. The method is more feasible and effective than convectional grid methods in order to solve a flaw field with complicated boundary shapes.

• Journal of the Korea Society for Simulation
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2012

In recent days, global shipbuilding companies have been showing great interest in eco-friendly ship products and trying to reduce environmental pollution - harmful gas and dust in shipbuilding process. Following this trend, Life Cycle Assessment (LCA) was carried out to an application of shipyards layout. LCA is a technique used to assess environmental impacts during the life cycle of products and systems. Until now, LCA has been used through ISO 14040 in somewhat limited industries, such as Building Life Cycle Assessment. Thus, this study analyzes the shipyard layout planning framework and builds life cycle inventory along with the simulation model structure to evaluate environmental impacts.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.2 s.140
• /
• pp.165-174
• /
• 2005

Recently, world leading companies on manufacturing field are trying to adopt a PLM methodology, which is a new production paradigm, for a survival and strengthening the competitiveness. Some projects for a digital shipyard including a methodology of a digital simulation framework are going on by Seoul national university and Samsung heavy industry. A Database methodology for a scheduling data, an interfacing methodology for a simulation input and output, and a synchronized simulation related methodology are required for enhancing the value of the digital simulation for shipbuilding. In this paper, such a methodologies and a related case study for a fabrication factory and an assembly factory are presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.2
• /
• pp.119-127
• /
• 2012

A wire rope is comprised of several metal wires which are wound together like a helix and it can resist relatively large axial loads, as compared with bending and torsional loads. A shipbuilding crane for erection such as a floating crane, a gantry crane, and a crawler crane hoists up and down heavy blocks by using these wire ropes. Thus, it is necessary to find dynamic properties of a wire rope in order to safely lift the blocks using the crane. In this study, a formula for calculating the tension and torsional moment acting on wire ropes of the crane was derived based on the existing study, and then dynamic simulation of the crane was performed based on the formula. The result shows that the dynamic simulation can be applied to find the safe method for block erection of shipyards.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.418-426
• /
• 2015

Recently, shipping operators have been making efforts to reduce the fuel cost in various ways, such as trim optimization and bulb re-design. Furthermore, IMO restricts the hydro-dioxide emissions to the environment based on the EEDI (Energy Efficiency Design Index), EEOI (Energy Efficiency Operational Indicator), and SEEMP (Ship Energy Efficiency Management Plan). In particular, ship speed is one of the most important factors for calculating the EEDI, which is based on methods suggested by ITTC (International Towing Tank Conference) or ISO (International Standardization Organization). Many shipbuilding companies in Korea have carried out speed trials around the Korea Straits. However, the conditions for these speed trials have not been exactly the same as those for model tests. Therefore, a ship’s speed is corrected by measured environmental data such as the seawater temperature, density, wind, waves, swell, drift, and rudder angle to match the conditions of the model tests. In this study, fundamental research was performed to evaluate the ship resistance performance due to changes in the water temperature and salinity, comparing the ISO method and numerical simulation. A numerical simulation of a KCS (KRISO Container ship) with a free-surface was performed using the commercial software Star-CCM+ under three conditions that were assumed based on the water temperature and salinity data in the Korea Straits. In the simulation results, the resistance increased under low water temperature & high salinity conditions, and it decreased under high water temperature & low salinity conditions. In addition, the ISO method showed the same result as the simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.434-437
• /
• 2004

This paper presents the development of a new climbing mechanism for inter-block welding in Shipbuilding. The climbing mechanism is that it is career type of robot that can pass over block interval for welding of interblock in shipbuilding. The point part of mechanism is that move ballscrew. The Ballscrew`s capacity account and dynamic analysis of leg part are achieved through this paper. Force and torque analysis were achieved by simulation. This can have strong point in side of cost-cutting and welding amount of work than existent method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.8
• /
• pp.440-447
• /
• 2015

In the shipbuilding process, the confined work spaces of the ship are formed continuously; the ventilation method can therefore be limited to dilution ventilation due to the complex structure and limited opening of the confined space. Also, it is difficult to evaluate air-quality using measurement and an adequate ventilation method. CFD simulation methods are typically used in analyzing ventilation efficiency in these cases. In this study, a method is suggested to analyze the air quality of the complex enclosures in shipbuilding using CFD. Especially, among the conventional indices, the ventilation efficiency scales or indices, the supply air contribution (SVE4), and the age of the air (SVE3) (fit for the confined and complex enclosure) were applied.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.695-703
• /
• 2010

Training is one of the representative application fields of virtual reality technology where users can have virtual experience in a training task and working environment. Widely used in the medical and military fields, virtual-reality-based training systems are also useful in industrial fields, such as the aerospace industry, since they show superiority over real training environments in terms of accessibility, safety, and cost. The shipbuilding industry is known as a labor-intensive industry that demands a lot of skilled workers. In particular, painting jobs in the shipbuilding industry require a continuous supplement of human resources since many workers leave due to the poor working environment. In this paper, the authors present a virtual-reality-based training system for spray painting tasks in the shipbuilding industry. The design issues and implementation details of the training system are described, and also its advantages and shortcomings are discussed based on use cases in actual work fields.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.6
• /
• pp.589-601
• /
• 2016

The hybrid grid was adopted and numerical prediction analysis of propeller unsteady bearing force considering free surface was performed for mode and full-scale KCS hull-propeller-rudder system by employing RANS method and VOF model. In order to obtain the propeller velocity under self-propulsion point, firstly, the numerical simulation for self-propulsion test of full-scale ship is carried out. The results show that the scale effect of velocity at self-propulsion point and wake fraction is obvious. Then, the transient two-phase flow calculations are performed for model and full-scale KCS hull-propeller-rudder systems. According to the monitoring data, it is found that the propeller unsteady bearing force is fluctuating periodically over time and full-scale propeller's time-average value is smaller than model-scale's. The frequency spectrum curves are also provided after fast Fourier transform. By analyzing the frequency spectrum data, it is easy to summarize that each component of the propeller bearing force have the same fluctuation frequency and the peak in BFP is maximum. What's more, each component of full-scale bearing force's fluctuation value is bigger than model-scale's except the bending moment coefficient about the Y-axis.