• 한국해양공학회지
• /
• 제18권6호
• /
• pp.44-50
• /
• 2004

A small, highly-trained crew working on the ship's automation has contributed to the improvement of operations and the labor environment on board ship. However, at the same time, having a small crew adds more responsibility to the ship's officers to safely operate and manage the ship. With the use of information and computer technology, efforts are being made towards the development of a system that will concentrate important information from the various pieces of navigational equipment. The purpose of this study is to set up and implement an integrated marine data networking and communication system on the training-research ship. Information relating to navigation, engine and office automation are investigated and analyzed, and implementation methods associated with navigation, engine and management information system were designed and presented. In addition, the networking system of the navigational signal interface unit for the integrated communication system, and the data communication method between the ship and land are also discussed.

• 대한조선학회논문집
• /
• 제47권5호
• /
• pp.751-756
• /
• 2010

The rapid growth of IT technology has enabled ship automation systems to gain better functionality and safety with reduced costs and crew numbers. Nowadays, the remote maintenance services for the systems are required because a ship may be located in a very remote area. To provide the remote maintenance services, some issues such as how to collect the ship automation systems data, how to monitor a ship's data from onshore offices, how to get support from experts while sailing, and how to reduce the maintenance costs, should be addressed. In this paper, we propose a remote ship maintenance system for remote monitoring and diagnostics of ship automation systems, which is based on both a ship area network to integrate separate system networks and a ship-shore communication infrastructure to support a remote access using satellite communications. Finally, we present the function test to verify the applicability of the proposed system.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.59-66
• /
• 2020

This paper is the result of a study conducted in the ship concept design stage on the concept of system integration of the submarine rescue systems to be mounted and operated on the next submarine rescue ship (ASR-II Batch II) of the Korean Navy. In this paper, the concept of realization of naval ship system integration is considered, the operational concept of the next submarine rescue ship is analyzed, the requirements of the rescue operation system were analyzed, and the conceptual architecture (draft) of the rescue operation system was designed and proposed to meet the naval ship system integration policy.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.307-311
• /
• 1987

This paper presents a ship navigation system and automated equipments on ship board, whose technology has been quite rapidly developing in recent years. The ship owners and builders are much interested in ship automation systems, due to their comfort, safety and lower life cycle cost in ship operation. Here the basic technology and structure of the system are described, also taken into account is the future trend on the development of the system.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.164-170
• /
• 2006

To improve ship's maneuverability and carry out special goal POD propulsion system was equipped as propulsion and maneuvering system. To predict the maneuverability of a ship with POD propulsion system HPMM tests and POD open water test are carried out. In this paper modular model with 4 degree of freedom of a ship with twin POD propulsion system is presented. To use modular model the forces of POD propulsion system are measured separately from the hull forces. The measured forces and moments are analyzed by using modular model and whole ship model The simulation results of modular model are compared with those of whole ship model. From the present study it is Possible to analyze HPMM tests of a ship with twin POD propulsion system by modular model.

• 드라이브 ㆍ 컨트롤
• /
• 제10권4호
• /
• pp.14-21
• /
• 2013

The numerical analysis of the automatic ship mooring system which was equipped in the ship for trying to berth at the pier was performed in this study. The automatic ship mooring using hydraulic winch was a new method that had not need to change the existing devices and to help a pilot ship of outside. The numerical results of the proposed mooring system including ship motion were that the speed and rolling phenomenon of ship was affected by changing in the ship weight and affected the slope maintenance and yaw degree of ship if there has a trim of stern. Also, a static force of ship at the initial movement was important to calculate the mooring power. The moving force and inertial force of ship on the vertical direction was confirmed for the mooring stability. Therefore, the power and velocity of hydraulic mooring winch should be determined by considering the significant characteristics such as weight, velocity, inertial force and moving force of ship.

• 한국항해항만학회지
• /
• 제44권2호
• /
• pp.136-143
• /
• 2020

Maritime autonomous surface ships (MASS) has been developed over the years. But, there are many unresolved problems. To overcome these problems, this study proposes connected ship navigation system. The system comprises a slave ship and a master ship that leads the slave ship. To implement this system, communication network, route planning algorithms, and controllers are designed. The communication network is built using the transmission control protocol/Internet protocol (TCP/IP) socket communication method to exchange data between ships. The route planning algorithms calculate the course and distance of the slave ship using the middle latitude sailing method. Nomoto model is used as the mathematical model of the slave ship maneuvering motion. Then, the autoregressive with exogenous variables (ARX) model is used to estimate the parameters of Nomoto model. Based on the above model, the automatic steering controller is designed using a proportional-derivative (PD) control. Also, the speed controller is designed for the slave ship to maintain constant distance from the master ship. Sea experiments are conducted to verify the proposed system with two remodeled boats.

• 한국항해학회지
• /
• 제18권4호
• /
• pp.11-21
• /
• 1994

Final aim of this paper is a study on simulation of automatic steering of a ship in random seas. In order to achieve this aim, we need excitation due to random seas. The excitation may be estimated from energy spectrum of irregular waves and response functions of manoeuvring motion of a ship in regular waves. This paper deals with response functions of manoeuvring motion of a ship in regular waves. We discussed New Strip Method(NSM) of sway-yaw-roll coupled motions in regular waves. NSM is defined in space axes system and that has been used to predict seakeeping performance of a ship in waves. But ship manoeuvring is defined in body fixed axes system. So we cannot use NSM theory itself in predicting manoeuvring performance of a ship in waves. We introduced relationship between space axes system and body fixed axes system. And we developed modified NSM which was defined in body fixed axes system and was able to be used in manoeuvring motion of a ship in waves. We calculated sway and yaw response functions of manoeuvring motion of a bulk carrier in regular waves.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 춘계학술대회
• /
• pp.7-9
• /
• 2011

In December 2002, International Maritime Organization (IMO) has adopted the Resolution MSA.137(76) Standards for the Ship Maneuverability. For applying the standards, we have to estimate and evaluate the Maneuverability of a ship at the design stage in difference of trim and displacement as accurate as possible. In this paper, the effect of loading condition on the ship Maneuverability was investigated through 3 methods : numerical simulation, free running model ship and real ship data.. Firstly, We carried out numerical simulation, free running model ship experiments and real ship experiments at ballast condition, half loaded condition and full loaded condition with difference of trim.. Secondly, by comparing these results of 3 methods, we draw out the trend of ship Maneuverability due to the change of trim and displacement of a ship.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.777-784
• /
• 1994

A design expert system for the ship structural design is developed to support inexperienced designers. To establish the knowledge-base, an expert system development shell, Nexpert, is used. Knowledge is extracted from the rules of a classification society of ships, and also from an existing ship structural program that is being used by ship designers. This knowledge is systematized using the objectoriented concept. The design support system is constructed by adding additional functions which are required for the conventional engineering design work. Added functions are; calculation of longitudinal strength, database of existing ship designs, graphical user interface, and visualization of design results. It is observed that visualizing the relationships among the rules, which are activated to draw a certain design decision, is helpful. The system can easily be updated according to changes of the rule books of ship classification societies.