• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.46-50
• /
• 2008

The purpose of the present study was to investigate the mariner's information characteristics in ship-ta-ship collision situation using the full mission ship-handling simulator. Risk levels of ship-to-ship collision were manipulated by whether the target ship complies with the naval regulations and by movement patterns of target ship. Dependent variables reflecting mariner's information characteristics in ship-ta-ship collision situation were measured in terms of radar detection reaction time, free recall performance of past navigation situation, and subjective ratings for the task difficulty. The results showed that, in general, the mariners appeared to be deteriorated in their radar detection reaction time and free recall performance as the risk of ship-ta-ship collision increased. Also, the mariners tended to rate required tasks more difficult in the high risk ship-ta-ship collision situation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2001.10a
• /
• pp.104-107
• /
• 2001

Based on the analysis of the functions of ship management company, this paper aims to explore how to build the platform to transmit anti process the information about ships by means of modern information management so as to solve a series of problems caused by blockages in information transmitting in present ship’s management. The paper also talks about the necessity of establishing various resource bases and using different information communicating methods to realize the resource sharing and intellectualization of ship’s business.

• Korean Journal of Remote Sensing
• /
• v.38 no.4
• /
• pp.435-446
• /
• 2022

Identifying ship types is an important process to prevent illegal activities on territorial waters and assess marine traffic of Vessel Traffic Services Officer (VTSO). However, the Terrestrial Automatic Identification System (T-AIS) collected at the ground station has over 50% of vessels that do not contain the ship type information. Therefore, this study proposes a method of identifying ship types through the Random Forest Classifier (RFC) from dynamic and static data of AIS and V-Pass for one year and the Ulsan waters. With the hypothesis that six features, the speed, course, length, breadth, time, and location, enable to estimate of the ship type, four classification models were generated depending on length or breadth information since 81.9% of ships fully contain the two information. The accuracy were average 96.4% and 77.4% in the presence and absence of size information. The result shows that the proposed method is adaptable to identifying ship types.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.24-29
• /
• 2004

A small, highly-trained crew working on the ship's automation has contributed to the improvement of operation efficiency and the labor environment on board ship. However, at the same time, having a small crew adds more responsibility to the ship's officers to safely operate and manage the ship. Recently, development on the system to concentrate important information being scattered at the various pieces of navigational equipment has been actively studied, using information and computer technology. The purpose of this study is to set up and implement an integrated marine data networking and communication system on the training-research ship. Information relating to navigation, engine and office automation were investigated and analyzed, and implementation methods associated with navigation, engine and the management information system were designed and presented. In addition, the networking system and navigational signal interface unit for the integrated communication system, and the data communication method between the ship and land are also discussed.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.6 s.61
• /
• pp.44-50
• /
• 2004

A small, highly-trained crew working on the ship's automation has contributed to the improvement of operations and the labor environment on board ship. However, at the same time, having a small crew adds more responsibility to the ship's officers to safely operate and manage the ship. With the use of information and computer technology, efforts are being made towards the development of a system that will concentrate important information from the various pieces of navigational equipment. The purpose of this study is to set up and implement an integrated marine data networking and communication system on the training-research ship. Information relating to navigation, engine and office automation are investigated and analyzed, and implementation methods associated with navigation, engine and management information system were designed and presented. In addition, the networking system of the navigational signal interface unit for the integrated communication system, and the data communication method between the ship and land are also discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.745-748
• /
• 2001

Digital-ship is the next-generation ship with an one-man bridge system which consists of INS(Intelligent Navigation System), AIS(Automatic Identification System), and IMIT(Integrated Maritime Information Technology). INS implements the functions is related of the ship's navigation, and supports in the digital GIS environments optimal route planning, stranding and a collision avoidance among the ship, an economic navigation, and an integrated control of ship's engine. AIS prevents the ship's collision by means of transmitting periodically the own ship's information to the other ship or the shore control center. IMIT systems supports the integrated fiat-form in ships, the communication between a ship and a control center of the land using the INMARSAT, OrbComm, Ocean Observation Satellite, and etc. The satellite communication in ships can monitor the ship at an earth control renter. This paper deals with the method for system implementation of digital-ship and the detailed sub-system.

• Korean Journal of Remote Sensing
• /
• v.39 no.1
• /
• pp.77-86
• /
• 2023

Ship detection is widely used in areas such as maritime security, maritime traffic, fisheries management, illegal fishing, and border control, and ship detection is important for rapid response and damage minimization as ship accident rates increase due to recent increases in international maritime traffic. Currently, according to a number of global and national regulations, ships must be equipped with automatic identification system (AIS), which provide information such as the location and speed of the ship periodically at regular intervals. However, most small vessels (less than 300 tons) are not obligated to install the transponder and may not be transmitted intentionally or accidentally. There is even a case of misuse of the ship'slocation information. Therefore, in this study, ship detection was performed using high-resolution optical satellite images that can periodically remotely detect a wide range and detectsmallships. However, optical images can cause false-alarm due to noise on the surface of the sea, such as waves, or factors indicating ship-like brightness, such as clouds and wakes. So, it is important to remove these factors to improve the accuracy of ship detection. In this study, false alarm wasreduced, and the accuracy ofship detection wasimproved by removing wake.As a ship detection method, ship detection was performed using machine learning-based random forest (RF), and convolutional neural network (CNN) techniquesthat have been widely used in object detection fieldsrecently, and ship detection results by the model were compared and analyzed. In addition, in this study, the results of RF and CNN were combined to improve the phenomenon of ship disconnection and the phenomenon of small detection. The ship detection results of thisstudy are significant in that they improved the limitations of each model while maintaining accuracy. In addition, if satellite images with improved spatial resolution are utilized in the future, it is expected that ship and wake simultaneous detection with higher accuracy will be performed.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.381-390
• /
• 1999

In this study, a pseudo ship structure data model for the :.hip cargo hold structure based on STEP is proposed. The proposed data model is based on Application Reference Model of AP218 Ship Structure which is the model that specifies conceptual structures and constraints used to describe the information requirements of an application. And the proposeddata model refers the Ship Common Model framework for the model architecture which is the basis for ongoing ship AP development within the ISO ship-building group and the ship product definition information model of CSDP research project for analyzing the relationship between ship structure model entities. The proposed data model includes Space, Compartment. Ship Structural System, Structural Part and Structural Feature of cargo hold. To generate this data model schema in EXPRESS format, ‘GX-Converter’was used which enables user to edit a model in EXPRESS format and convert schema file in EXPRESS format. Using this model schema, STEP physical file containing design data for ship cargo hold data structure was generated through SDAI programming. The another STEP physical file was also generated containing geometry data of ship cargo hold which was extracted and calculated by SDAI and external surface/surface intersection program. The geometry information of ship cargo hold can be then transferred to commercial CAD system, for example, Pro/Engineer. Examples of the modification of the design information are also Presented.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.3
• /
• pp.670-684
• /
• 2014

Ship Information Systems (SISs) have been one of the main research focuses in ship design and become a multidisciplinary area. With these growing research trends, it is important to consolidate the latest knowledge and information to keep up with the research needs. In this paper, the SIS and its different forms are introduced and discussed. The beginning of this paper discusses the history and evolution of SIS. The next part of this paper focuses on different fields and research areas such as networking technology, information fusion, information decision, message display, ship control in real-time SISs. A Semi-Physical Simulation Platform (SPSIM) designed for SIS research and its running effect through a new Fuzzy-PID fusion algorithm are introduced in this paper then. A brief literature survey and possible future direction concerning each topic is included.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.299-307
• /
• 2013

Introduction of PLM in domestic shipyards is being retarded as ship PLM has yet to firm up return of investment and process integration. To implement a ship PLM system, it is required to share ship CAD model data in various design and manufacturing environments. Lightweight CAD models provide a promising solution for sharing CAD models in the product life cycle, which can expedite implementation of ship PLM in domestic shipyards in the near future. Compared to proprietary CAD models, it is easy for lightweight CAD models to be interfaced with various application systems and be connected to manufacturing information. In this paper, the reason why lightweight CAD models are necessary to implement a ship PLM system is addressed and current implementation results are introduced.