• Structural Monitoring and Maintenance
• /
• v.5 no.2
• /
• pp.297-311
• /
• 2018

Plate and shell structure is widely applied in engineering, i.e. building roofs, aircraft wings, ship platforms, and satellite solar arrays. Its vibration problem has become increasingly prominent due to the tendency of lightening, upsizing and flexibility. As a new smart material with great actuating force and toughness, macro-fiber composite (MFC) is composed of piezoelectric fiber and epoxy resin basal body, which can be directly pasted onto the surface of plate and shell and is suitable for vibration control. This paper deduces the actuation equation of MFC coupled plate in different boundary conditions, an equivalent finite element modeling method is proposed which uses MFC actuating force as the applied excitation, and on this basis the active control simulation and experiment of MFC over plate and shell structure vibration are accomplished. The results indicate that MFC is able to implement effective control over plate and shell structure vibration in multi-band range. The comparison between experiment and simulation proves that the actuation equation deduced herein, effective and practicable, can be applied into the simulation calculation of MFC vibration control over plate and shell structure.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.92-97
• /
• 2006

Hull forms of a high speed small boat have been developed through numerical studies. A round bilge type hull form has been drived form a using chine hull form with HCAD, a hull form variation software. Wave resistance and the flow fields around the ships have been computed using well-known software, WAVIS. This software employs Rankine source method with non-linear tree surface condition as well as dry transom boundary conditions. The round bilge hull form showed better resistance performance than to the chine hull form for the whole speed range. However, considering the building and labor costs of the small shipyard, the chine hull form has been selected and its wave resistance characteristics has been improved by modifying the bow regions and applying the stem wedge. It is found that the effect of stem wedge is quite satisfactory to improve the resistance characteristics of high speed chine hull form.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1307-1313
• /
• 2014

In this paper, we have proposed a tapered slot antenna for IR-UWB communication system suitable of indoor positioning in the building. The designed tapered slot antenna is designed using Ansys Inc. HFSS and its standing wave ratio, return loss, and radiation pattern is analyzed. In 2.36 GHz ~ 5.51 GHz and, the designed antenna shows satisfactory return loss at -10 dB and meets the requirement of $VSWR{\leq}2$. The presented designed showed a higher sensitivity for the end-fire propagation characteristics in a specific direction across all bands of the radiation pattern.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.6
• /
• pp.850-856
• /
• 2012

Bilateration using two fixed nodes has been used in the field of the real time indoor location system in the narrow space such as building or ship passage. However, as the distance between the fixed nodes increases or any obstructions exist in their zone, it is difficult to detect the location of mobile node(user) due to the degradation of its reception ratio. In order to compensate for these problems, this paper presents, based on IEEE 802.15.4a chirp signal, a new real time indoor location system using stride measurement algorithm which can calculate the location through sensors attached to user. The proposed system consists of an ultrasonic sensor to measure the leg length, a geomagnetic sensor to recognize the user's orientation, and an inertial sensor to obtain the angle between the legs. The experimental results are shown that the proposed system has twice or more accurate output compared with conventional indoor location method in the section which is partially out of communication reachability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.178-185
• /
• 2012

In Korea, researches on the exposure assessment of the hand-transmitted vibration started from the mid-90, however, they were performed in the limited industries such as auto-assembly plants and the evaluation of the vibration was mostly conducted by ISO 5349(1986). Therefore, it was necessary to assess hand-transmitted vibration levels of workplace such as ship building/repairing industry or mining industry where occupational injuries are largely occurred and to evaluate the vibration levels using revised ISO 5349(2001). The SVAN 949 Four Channels Sound & Vibration Analyser was used for the measurement. The workers using a chain saw were exposed to $1.7{\sim}2.8m/s^2$ of daily vibration level. Workers using a rock drill in a coal mining were exposed to the highest vibration acceleration among workers and the levels were $7.1{\sim}10.8m/s^2$. Vibration levels of grinders were different according to the types of grinders. The hand-transmitted vibration of 3 types of grinders were measured and the levels were $3.3{\sim}11.1m/s^2$. Workers using a impact wrench were exposed to $1.5{\sim}1.6m/s^2$ of vibration. Out of 20 kinds of machines, only 4 tools provided the information of vibration acceleration on the instructions. In addition, the current condition of workplaces to control vibration was not much different from the past because there are no vibration exposure limit.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.3
• /
• pp.202-207
• /
• 2018

This paper presents the efficiency of a floating vertical axis wind turbine with variable-pitch. A model was designed to use the lift force and drag force for blades with various pitch angles. The blade's pitch angle is controlled by the stopper. To validate the efficiency of the wind turbine discussed in this paper, a model test was carried out through a single model efficiency experiment and wave tank experiment. The parameters of the single model efficiency experiment were the wind speed, electronic load, and pitch angle. The wave tank experiment was performed using the most efficient pitch angle from the results of the single model efficiency experiment. According to the results of the wave tank experiment, the surge and pitch motion of a structure slightly affect the efficiency of a wind turbine, but the heave motion has a large effect because the heights of the wind turbine and wind generator are almost the same.

• Journal of Information Technology and Architecture
• /
• v.9 no.2
• /
• pp.143-154
• /
• 2012

With the realization of the importance of the NWI, iterated by the Cheonan Ship sink and the YP-Do shelling, this thesis separates the NWI from the peninsula, regarding it separate from the Korea Theater of Operations, and suggests the method to establish NCOE with consideration to the characteristics of separated theater as well as the current situation. Although the NWI holds strategic value, systematical NCOE of surveillance and reconnaissance system, command and control system, and precision strike system is not yet established. Pertaining to this issue, Architecting was utilized to identify improvement measures and of the identified improvement measures, improvement on the "strike on nK hardened artillery sites with K-9 Self-Propelled Artillery in correlations with theater ISR" shows greatly improved strike effects when conducting simulations based on the Operation-Plan Analysis Model. Such a method of NCOE establishment will serve as a standard model for military force building and operation execution system for separated theater operations such as the NWI.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.517-517
• /
• 2000

Welding automation is one of the most important manufacturing issues in shipbuilding in order to lower the cost, increase the quality, and avoid the labor problems. Generally the on-line teaching is utilized on the robot that is used in the welding automation system, but it requires much effort and long time to program. Especially, if the system is composed of more than two cooperating robots, it demands much more skill to program the robots' motion. Thus, a convenient programming tool is required for efficient utilization of welding automation system. In this study, a convenient programming tool is developed for welding automation in which gantry-robot system is used. The system is composed of a gantry transporter and two robots mounted on the gantry to cover the wide work range in the ship building application. As a programming tool, an off-line programming software based on PC is developed. By using this software, field operator does not need to concern about coding of task programs for three control units, one is for gantry and two are for robots. The task programs are automatically generated by assembling the program modules in database according to geometrical information of workpiece and welding condition, which become the only concern of field operator, The feasibility of the generated programs can be verified via a motion simulator previously to on-line running.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.183-192
• /
• 2006

Predicting energy expenditure (EE) is important to prevent work-related musculoskeletal disorders (WMSDs). The problem to predict EE is that the standard of EE is based on western data. The authors checked average EE by job categories to provide basic data for suggesting proper work intensity for Korean workers. This study was conducted from 2003 to 2005. Study subjects were recruited from 4 car parts assembly plant, 2 car assembly plant, 2 Heavy machine manufacturing plant and 2 shipyards. Total study subjects were 515 male workers. To estimate VO2max, sub-maximal test was conducted to measure VO275%max by bicycle ergometer (Combi Co, Aerobike 75XL II). Heartbeats were recorded with heartbeat recorder (Polar Electro Co, Finland, S810) during work. EE of work was calculated by recorded heartbeat and individual regression equation which was derived from sub-maximal test. Subjects were classified into 4 industry and 8 work posture, 23 job task categories. Mean EEs (S.D.) according to industry classification (kcal/min) were 4.9 (0.7), 4.8 (0.7), 4.9 (0.7), 5.0 (0.9), and 4.0 (0.5) for Car Part manufacture, Car Assembly, Ship Building, Heavy Machinery Manufacture, and Hospital Office, respectively. The results suggest that Korean male workers of exceeding to the NIOSH criteria will be needed to plan for job rescheduling to maintain $worker^{\circ}$Øs health. Further study to establish Korean work intensity standard would be needed.

• Molecular & Cellular Toxicology
• /
• v.4 no.4
• /
• pp.360-365
• /
• 2008

In the last several years, studies on the association of oxidative stress damage with exposure in the work place have been conducted. Xenobiotics create an imbalance of the homeostasis between oxidant molecules and antioxidant defense. By monitoring oxidative stress biomarkers, information was obtained on damages induced by oxidative stress and the toxicity of xenobiotics. In the present study, a Job Exposure Matrix (JEM) was constructed using the data from the Working Environment Measurement (WEM) of painters in the shipyard industry from the past 3 years to assess the exposure status. Additionally, by measuring the concentration of urinary malondialdehyde (MDA), the effect of lipid peroxidation was examined. The subjects consisted of 68 workers who were exposed to mixed organic solvents in the painting process and 25 non-exposure controls. The exposure indices of the exposure groups were significantly different (sprayer: 0.83, touchup: 0.54, assistant: 0.13, P<0.05). The urinary MDA concentration of the exposure group was 48.60${\pm}$ 39.23 ${\mu}mol$/mol creatinine, which was significantly higher than 18.03${\pm}$16.33 ${\mu}mol$/mol creatinine of the control group (P<0.05). From the multiple regression analysis of urinary MDA, the regression coefficient for exposure grade was statistically significant. In future studies, evaluation of the antioxidant levels of subjects should be performed simultaneously with quantitative exposure measurements.