• 대한조선학회지
• /
• 제20권1호
• /
• pp.11-20
• /
• 1983

In this paper elastic-plastic large deflection analysis of ship structural members, plates, stiffened plates and cylindrical shallow shell, are performed by the finite element method. And for the consideration of the yielded propagation through the depth of the member, the layered element approach is employed. The present method is justified by comparing its results with those of experiment and others. As results, the nonlinear behavior and the ultimate strength curves are shown, which can be used in the design of the plates and the stiffened plates under compression, and the applicability to the shell structures is suggested. The analysis results are as followings. (1) The results of the approximate equations as well as those of buckling analysis may not guarantee precisely the safety of the structures in some cases and the optimum in other cases. Therefore they may not show the design criteria for the optimal design. (2) As the initial deflection increases, its effects on the ultimate strength of the structure generally increases, and the ultimate load, therefore, decreases. (3) This approach can be applied to the shell type structures. (4) The present method can be applied to the various structures composed of plate and beam members, for example, plates with hole and the stiffened plates with hole stiffened by spigot, doubler and/or stiffener, for the optimal design.

• 대한조선학회논문집
• /
• 제47권2호
• /
• pp.258-264
• /
• 2010

Various kinds of ballast water treatment systems (BWTS) have been developed corresponding to reinforced IMO rules for marine environment. Some of them got the certificate of IMO and others are waiting for it. Selection of optimum BWTS is very important. Optimum BWTS means not only functional requirements but also economic efficiency. This paper presents economic analysis model for optimum BWTS according to ship type and size. In this study 10 kinds of BWTS whose initial installation cost and maintenance cost are known are analyzed based on present worth method. It is assumed that all BWTS satisfy minimum functional requirements and we need to consider different economical efficiency. Through the economic analysis we could select optimum BWTS.

• 한국항해학회지
• /
• 제13권1호
• /
• pp.21-53
• /
• 1989

In the past twenty years, there has been a rapid increase in the volume of traffic in Korea due to the Korean great growth of the Korean economy. Since transformation provides an infrastructure vital to economic growth, it becomes more and more an integral part of the Korea economy. The importance of coastal shipping stands out in particular, not only because of the expansion limit on the road network, but also because of saturation in the capacity of rail transportation. In spite of this increase and its importance, coastal shipping is falling behind partly because it is givenless emphasis than ocean-going shipping and other inland transportation systems and partly because of overcompetition due to excessive ship tonnage. Therefore, estimating and planning optimum ship tonnage is the first take to develop Korean coastal shipping. This paper aims to estimate the optimum coastal ship tonnage by computer simulation and finally to draw up plans for the ship tonnage balance according to supply and demand. The estimation of the optimum ship tonnage is peformed by the method of Origin -Destimation and time series analysis. The result are as follows : (1) The optimum ship tonnage in 1987 was 358, 680 DWT, which is 54% of the current ship tonnage (481 ships, 662, 664DWT) that is equal to the optimum ship tonnage in 1998. this overcapacity result is in excessive competition and financial difficulties in Korea coastal shipping. (2) The excessive ship tonnage can be broken down into ship types as follows : oil carrier 250, 926 DWT(350%), cement carrier 9, 977 DWT(119%), iron material/machinery carrier 25, 665 DWT(117%), general cargo carrier 17, 416DWT(112%). (3) the current total ship crew of 5, 079 is more than the verified optimally efficient figure of 3, 808 by 1271. (4) From the viewpoint of management strategy, it is necessary that excessive ship tonnage be reduced and uneconomic outdated vessels be broken up. And its found that the diversion into economically efficient fleets is urgently required in order to meet increasing annual rate in the amounts of cargo(23, 877DWT). (5) The plans for the ship tonnage balance according to supply and demand are as follows 1) The establishment of a legislative system for the arrangement of ship tonnage. This would involve; (a) The announcement of an optimum tonnage which guides the licensing of cargo vessels and ship tonnage supply. (b) The establishment of an organization that substantially arrangement tonnage in Korea coastal shipping. 2) The announcement of an optimum ship tonnage both per year and short-term that guides current tonnage supply plans. 3) The settlement of elastic tariffs resulting in the protect6ion of coastal shipping's share from other tonnage supply plans. 4) The settlement of elastic tariffs resulting in the protection of coastal shipping's share from other transportation systems. 4) Restriction of ocean-going vessels from participating in coastal shipping routes. 5) Business rationalization of coastal shipping company which reduces uneconomic outdated vessels and boosts the national economy. If we are to achieve these ends, the followings are prerequisites; I) Because many non-licensed vessels are actually operating and threatening the safe voyage of the others in Korea coastal routes, it is necessary that those ind of vessels be controlled and punished by the authorities. II) The supply of ship tonnage in Korean coastal routes should be predently monitored because most of the coastal vessels are to small to be diverted into ocean-going routes in case of excessive supply. III) Every ship type which is engaged in coastal shipping should be specialized according to the characteristics of its routes as soon possible.

• 동력기계공학회지
• /
• 제16권4호
• /
• pp.17-23
• /
• 2012

In this study, the numerical simulation and basin model test have been performed to evaluate sea worthiness and resistance performance for a small pre-planning three type of leisure boats which are U, V, Y shapes of hull forms. As a well known commercial CFD code, Maxsurf, was applied for modeling hull forms used as the solver of motion analysis. Also the model resistance test was carried out to estimate the effective power of boat in the basin tank. Numerical simulation and model test results show that Y-shaped hull is better than the other types in terms of heave and pitch motion, having a key effect on a boat sea worthiness. But V-type hull is more efficiency than others cases in resistance performance.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.646-652
• /
• 2014

최근 10년간(2004~2013년) 국내의 조선소에서 발생한 해양오염사고의 건수를 연도별, 지역별, 조선소 작업별 및 오염물질별로 분석하였고, 이 분석 결과를 바탕으로 조선소 내 오염사고 방지 방안을 제시하였다. 전국의 조선소 내 오염사고는 10년간 총 103건이 발생하여 연평균 10.3건이었고, 연간 발생건수는 2004년 8건에서부터 점증하는 추세를 보이면서 2010년 23건으로 최고를 기록하였다가 다시 감소하는 추세로 바뀌어 2014년 9건을 나타내었다. 지역별 오염사고 건수는 부산이 32건(31%)으로 1위이고, 전남이 30건(29%), 경남이 21건(21%), 제주가 5건(5%), 강원과 경북이 각각 4건(4%), 인천과 충남이 각각 3건(3%)이었다. 조선소 작업별 오염사고 건수는 선박수리 작업이 60건(58%)으로 1위이고, 선박해체 작업이 25건(24%), 선박건조 작업이 10건(10%), 기타가 8건(8%)이었다. 오염물질별 오염사고 건수는 기름 및 유성혼합물이 59건(57%)으로 1위이고, 폐페인트 가루가 22건(21%), 쇳가루 및 용접슬래그가 13건(13%), 폐기물이 4건(4%), 폐FRP 가루가 3건(3%), 기타가 2건(2%)이었다. 국내 조선소 내의 오염사고를 방지하기 위한 방안으로는 (1) 관련 법규의 준수, (2) 조선소 밀집 지역에 대한 오염사고방지 실행계획의 수립 및 시행, (3) 특히 선박 수리 및 해체 작업을 하는 경우 조선소 내 기름오염방지 방안의 수립 및 시행, (4) 조선소 오염사고에 대한 민원 해결 대책의 마련, (5) 조선소 단속에 대한 국가 관리의 개선 등을 제시하였다.

• 수산해양기술연구
• /
• 제56권2호
• /
• pp.138-146
• /
• 2020

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.134-143
• /
• 1999

선박의 선미부와 선수부는 복잡한 곡을 가진 블록들의 조립으로 만들어진다. 이러한 복잡한 곡률 분포를 가진 이중 곡면을 성형하기 위해서 조선소에서는 롤러 굽힘 가공과 선상 가열을 이용하고 있다. 일차적으로는 롤러 굽힘에 의한 가공으로 실린더 형상이나 원추 형상의 곡면을 만들고 난 후, 선상 가열을 수행하여 목적 형상으로 이차 가공을 한다. 본 논문은 곡면 가공에서 선행되는 일차 가공의 정보로서 가공 방향과 가공 후 형상을 결정하는데 목적이 있다. 목적 형상의 가우스 변환(Gauss mapping)으로부터 가공 방향에 관한 정보를 결정하고 목적 형상과 롤러 굽힘 가공에 의해 변형된 판 사이의 기하학적 관계를 이용하여 롤러 굽힘 가공의 모양을 결정하는 알고리즘을 제시하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.425-429
• /
• 2002

It has been used many kinds of horizontal butt-welding methods at block-to-block erection stage in shipbuilding companies. For examples, some companies use conventional FCA W process with one side or both sides groove joint welding, others use carriage with torch holder type mechanized welding method. Although lots of efforts were done until now, some problems in quality and productivity still remain in ship's hull welding. In this study, we have attempted to raise productivity and quality on horizontal position of welding with following 3 items. 1) Prepare groove condition with no root gap for making easy fit-up work. 2) Develop improved MAG (100% $CO_2$ gas shielding) welding process with solid wire for making sound root bead from one side. 3) Develop and apply quite new automatic welding carriage. The stability of new welding process was confirmed by conducting mechanical tests of weldments to verify the soundness of weldments.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.34-38
• /
• 2003

It has been used many kinds of horizontal butt-welding methods at block-to-block erection stage in shipbuilding companies. For examples, some companies use conventional FCAW process with one side or both sides groove joint welding, others use carriage with torch holder type mechanized welding method. Although lots of efforts were done until now, some problems in quality and productivity still remain in ship's hull welding. In this study, we have attempted to raise productivity and quality on horizontal position of welding with following 3 items. 1) Prepare groove condition with no root gap for making easy fit-up work. 2) Develop improved MAG (100% $CO_2$ gas shielding) welding process with solid wire for making sound root bead from one side. 3) Develop and apply quite new automatic welding carriage. The stability of new welding process was confirmed by conducting mechanical tests of weldments to verify the soundness of weldments.

• 한국항해학회지
• /
• 제18권2호
• /
• pp.129-149
• /
• 1994

Sea casualties may happen in ship, cargo and the others concerned with sea transportation. : the shipo-wer, marine insurer and salvage company have been endeavored to compensate salvage award with some rule and regulation such as Marine Insurance Act, York Antwerp Rules and Average adjustment rules. Once sea casualties happened, the salvage contract is established between the owners, marine insurance and salvage company, the contract are divided into so many kinds of them. In this paper, we have an analysis on the character of the salvage contract whether the characteristic contents of them are in benefit to any party or not. In this connection with these positive or negative character of the contract, it is worthwhile to compare the actual salvage expenses contract with no cure no pay contract. LOF 1990 has been revised recently, which is based on no cure no pay, expecially, the special compensation, safety net clause of LOF 1990 could be understood in the view of the prevention of sea pollution and the preservation of sea circumstances in the world. Salvage has the complicated and quality, because the adjustment of almost salvage charges have been treated through the other sea casualties which is accompanied by and mixed with. Besides of the importance of salvage contracts, we are in need to understand that what the diversified character of salvage charges are. Furthermore the owners should carefully select the insured conditions on Hull Insurance according to the type of his company, operating ocean route, loading cargo and etc. In this paper, we would try to analyze the character of the salvage award such as General Average, Sue and Labour Charges and Particular charges. We would like to propose that the uniformed system of the salvage award. Compensation should be built up for the effective and efficient salvage operation and for reducing the claims and conflicts from the concerned parties. To this end, we could expect that the uniformed system for salvage award compensation will come to be the benefit of all owners, insurers, salvage company.