• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.723-731
• /
• 2020

The design of offshore plants should reflect the various requirements of the owner and the classification society. For a topside module mounted on an of shore structure, the design process is very demanding because of the large spatial constraints and the many requirements related to marine environmental conditions and safety such as the movement of the structure. In this study, the load acting on the hydraulic power unit, which is one of the main equipment in the topside module, was calculated according to the DNVGL rule; the structural safety was evaluated according to each load condition and the structural reliability of the developed product was improved. For structural analysis, MSC software was used, and structural analysis was performed under five load conditions to review structural safety for various movements. The results show that the maximum stress occurred during pitching toward the stern (Load Case 5). The stress level was approximately 85 % of the allowable stress, and the maximum deformation was approximately 5 % of the allowable value. The structural safety was confirmed, and no intermember interference occurred.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.462-472
• /
• 2017

Sunken vessels on major fairways can cause many problems in terms of maritime safety and the marine environment. In order to prevent secondary marine pollution accidents caused by sunken vessels, information on sunken vessels has been collected, a risk assessment has been conducted, and the relevant vessels are being managed according to the results of each assessment. However, there is still a demand for improvements. The most important of the improvement plans is a paradigm shift. In other words, the management of sunken vessels needs to be transformed according to a new paradigm to manage all sunken vessels within three years from the time of sinking. Legislative improvements are also needed for the reporting system for sunken vessels, risk assessment tools, the implementation of risk mitigation measures, and criteria for the implementation cost of risk mitigation measures. In addition, close coordination between marine pollution response and sunken vessel management efforts is needed. As the division of duties between the Korea Coast Guard and the Ministry of Oceans and Fisheries is vague, collaboration between the two ministries is required. Close collaboration is also needed between the departments of navigation safety management and sunken vessel management. Therefore, it is necessary to more clearly establish the relationship between the two systems and create a synergy effect between the two administrative operations using the results of the risk assessment in the Marine Environment Management Act to determine the navigational risk posed by obstacles with regard to the Maritime Safety Act.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.576-585
• /
• 2020

This study quantitatively investigated the increase in ballasting time through numerical calculations when an ultraviolet (UV) ballast water management system (BWMS) is installed on an existing vessel. The calculation results indicate that the ballasting time of a gas carrier having 55,000 dead weight tonnage was 2.152 hours without installation of the UV BWMS and implementation of a flow control function. Ballasting time increased by 14.2% after installing the UV BWMS, and it increased by 20.4% with both its installation and implementation of a flow control function. If actual conditions are taken into account, ballasting time after installing the UV BWMS is estimated to increase by at least 30% compared with current ballasting time. Therefore, when concerned parties select a UV type BWMS, it is advisable for them to minimize ship operation losses from an increase in ballasting time by considering the capacity of the actual ballast pumps on board and the flow energy loss of the UV BWMS. Additionally, it is recommended that a BWMS with larger capacity, larger pipes, and pipes with inside coatings be used to minimize the increase in ballasting time after installation of the BWMS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.412-418
• /
• 2020

Generally, the propeller shaft that constitutes the ship shaft system has different patterns of behavior due to the ef ects of engine power, propeller load and eccentric thrust, which increases the risk of bearing failure by causing local load variations. To prevent this, different studies of the propulsion shaft system have been conducted focused the relative inclination angle and oil film retention between the shaft and the support bearing, mainly with respect to the Rules for the Classification of Steel Ships. However, in order to secure the stability of the propulsion shaft via a more detailed evaluation, it is necessary to consider dynamic conditions, including the transient state due to sudden change in the stern wakefield. In this context, a 50,000 DWT vessel was analyzed using the strain gauge method, and the effects of propeller shaft movement were analyzed on the starboard rudder turn which is a typical transient state during normal continuous rate(NCR) operation in ballast draught condition. Analysis results confirm that the changed propeller eccentric thrust acts as a force that temporarily pushes down the shaft to increase the local load of the stern tube bearing and negatively affects the stability of the shaft system.

• Strategy21
• /
• s.38
• /
• pp.287-320
• /
• 2015

On October 27, 2015, USS Lassen(DDG82), a 9,200 ton class Aegis destroyer of the United States Navy, began its operations within 12 nautical miles of Subi Reef, one of the seven artificial islands that China has built and claimed sovereignty over. The maneuver was joined by anti-submarine patrol airplanes such as P-8A and P-3. The White House press secretary mentioned that the President of the United States approved the operation. In response, China announced that it warned the US Navy ship about the 'illegal violation' by sending two destroyers(PLAN Lanzhou and Taizhou). This event represents a close call case where tension between the United States and China in the South China Sea might have been elevated to a conflict between the two navies. Moreover, considering that this happened only one month after Chinese president Xi's state visit to the United States, the event shows that the positions of the two countries have become starkly different to the extent that they are so hard to be reconciled. The United States' position is different from those of Vietnam and the Philippines. Countries like Vietnam and the Philippines have been directly involved in disputes with regard to sovereignty claims across the waters in the South China sea. As for the United States, being a third party in the disputes, it still cannot be a by-stander watching the whole waters in the region fall under the influence of China. Accordingly, the United States maintains that all countries bear the rights of innocent passage and military operations in the Exclusive Economic Zones(EEZ) as stipulated by the United Nations Convention on the Law of the Sea(UNCLOS). In contrast, China claims that, historically, the South China sea has been part of China's territorial waters, and that foreign countries are not allowed to conduct military operations within the waters. It strongly accuses that such military operations are illegal. Against this background, this paper tracks the different positions of the United States and China on the issues regarding the South China sea. It also carefully looks at the possibility that, in the process of dealing with the issues, the two countries may get into an armed conflict as the phrase 'Thucydides Trap' predicts.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.191-195
• /
• 2005

The port entry system of the inner harbor in Pyeongtaek (Asan) was planned as lock-gate in 'Master plan project on port planning in Asan industry base(1990)', but was changed to tidal harbor in 'Project maintaining Master Plan for comprehensive development of Pyeongtaek (Asan) port(2001)'. Accordingly, southern sea bank constructed under the lower part of Seohae-bridge will be removed so that inbound/outbound vessels for the inner harbor can navigate at all times. However, in the view of the safety on passing through the lower of Seohae-bridge, navigating conditions for the inner harbor will be restricted in the single-way of 50,000 DWT vessel and the two-day of vessel less than 30,000 DWT. Therefore, this study carried out the estimation of traffic congestion arising from these vessels with above restrictions after supposing annual inbound/outboubd vessel's numbers for loading and unloading cargo surveyed on the inner harbor.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.155-162
• /
• 2014

In container terminals, stacking yard is the place where import and export containers are temporarily stored before being loaded onto or after being discharged from a ship. Since all the containers go through the stacking yard in their logistic flow, the productivity of the terminal critically depends on efficient operation of stacking yard, which again depends on how well the stacking locations of the incoming containers are determined. However, a good location for stacking an incoming container later can turn out to be a bad one when that container is to be fetched out of the stacking yard, especially if some rehandling is required. This means that good locations for the containers are changing over time. Therefore, in most container terminals, the so-called remarshaling is done to move the containers from bad location to good locations. Although there are many previous works on remarshaling, they all assume that the remarshaling can be done separately from the main jobs when the cranes are idle for rather a long period of time. However, in reality, cranes are hardly available for a period long enough for remarshaling. This paper proposes a crane dispatching strategy that allows remarshaling jobs to be mixed together with the main jobs whenever an opportunity is detected. Experimental results by simulation reveals that the proposed method effectively contributes to the improvement of terminal productivity.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.201-206
• /
• 2018

The purpose of this study is to estimate a proper Domain Watch between anchored vessels in order to propose a method for the efficient management of VTS(Vessel Traffic Service) of the N-anchorage in Busan harbor, which is the largest port in Korea. For this purpose, we proposed the calculation method of Domain Watch and investigated the ship length(L), the distance between anchored vessels ($D_{ij}$), the domain radius(R), and the domain radius vs L(R/L) during the peak time of the vessels in the latest usage of anchorage. As a result of technical analysis for the surveyed data, the minimum R/L for securing the safety distance between anchored vessels was selected based on 2.85 corresponding to the 70th percentile of the total data. This result was applied to the N-anchorage of Busan and compared with the 'Guidelines of Port and Harbor Design(2014)', and we have confirmed that it is reasonable to set the Domain radius with the minimum 2.85L or more in VTS. This study considers the safety management of anchorage for VTS. This study could contribute to the safety of vessels using anchorage and the safety management plan of VTS when it is applied to other ports in operation such as it was in Busan.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.347-353
• /
• 2020

Aids to Navigation (AtoN) contribute to preventing marine accidents and protecting marine environment by providing various information such as location information etc. to ships. Recognizing the importance of the AtoN, a 24 won of the AtoN service fee is charged for ships entering and leaving international trade ports. However, while the 24 won of the AtoN service fee has been maintained since its establishment in 1999, the demand for new roles of the AtoN service for autonomous shipping and smart port operations, etc. has gradually increasing with the change of shipping and port 4.0. Thus the purpose of this study was to estimate the appropriate level of the AtoN service fee in accordance with such changes in the shipping and port industries. To accomplish this, a method of recovering the total cost was introduced to the PROOF (Pyeongtaek Regional Office of Ocean and Fisheries). It is estimated that there are four cases in which estimation of the AtoN service fee is estimated in two cases year by year and conversion year, the AtoNs of PROOF are classified into the all and part of a ship using the trade port. As a result of the estimation, the AtoN service fee of PROOF is estimated at 53.78-71.62 won (as of 2019), and 29.78-47.62 won is higher than the today at 24 won. The results of this study can be used as useful basic data for the operation of budgets and policy management considering the role of the AtoN.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.115-122
• /
• 2017

Recently, the on-board equipments of vessels are getting diversifications with high technologies. With changing the trends, the shipboard network is turning to the light-weight ethernet architecture for integrated data management. For that necessity, this paper covers a development of the gateway system which gathers and processes the measured analog or NMEA data from loaded equipments to convert the messages based on IEC 61162-450 (standard for light-weight ethernet network of ships) in engine parts of small vessel. To do this, we analyzed the requirements for standardization of ship's equipments and related studies. To solve the problems of existing equipments, we defined the additional data formats (sentence formatter), developed the gateway system, and verified the utility of the developed system. Consequently, we established an interfacing framework for management and application of the generated data based on the ethernet in vessel.