• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.847-851
• /
• 2016

Due to global warming it is estimated that the arctic ocean route will be avaliable and traffic will increase by approximately year 2030. However, most navigation in the arctic is based on the ice breaker captains'orders, there is no exact measurement of convoy speed and distance between ships. So, this research was conducted to find out the minimum safe separation distance and minimum breaking distance via ship controling simulations, and the results are as stated. For breaking distances, for ships that have a lead distance which is 2~4 times the width of the ship and traveling less than 7 knots, crash astern and crash astern & hard rudder showed no significant difference. But ships traveling at 10 knots there was a decrease in breaking distance of 1L, from 3.5L to 2.5L. By analyzing 10 subject ships by crash astern the breaking distance for 5 knots is 0.98L~1.8L, for 8 knots is 1.9L~4.0L. The minimum safe separation distance in narrow sea-ways is 6L, but as the arctic sea-way is only one-way 3L is required. As the result, it is found that in the arctic the safe escort speed is less than 5 knots, if the escort speed is 8knots or more and by using crash astern & hard rudder to break the safe distance should be kept at 3.4L.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.603-612
• /
• 2017

Accidents associated with hazardous materials, including oil and HNS, in maritime transportation show increasing trend. Therefore, preventive countermeasures for such accidents should be provided. The purpose of this study is to analyze level of risk on human loss and potential damage to environment, using data on domestic marine accidents carrying hazardous materials (2002~2014), and identify high-risk accident types for urgent risk management which needs findings of accident causes and proper mitigation measures. High-risks on human loss are explosion and suffocation, occurred in process of ship maintenance and tank cleaning. On the other hand, high-risk on environmental damage is spill caused by ship accidents (collision, grounding and etc.). Especially, spill occurs during loading operation of oil and HNS onboard a ship. Strict operation supervision/management and safety education/training on a regular basis could prevent accidents, because human factors such as not wearing safety gear and careless cargo handling cause most of the marine accidents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.617-626
• /
• 2019

This study analyzes the optimal location of gas detectors through the gas dispersion in a cargo compressor room of a 174K LNG carrier equipped with high-pressure cargo handling equipment; in addition, we propose a reasonable method for determining the safety regulations specified in the new International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC). To conduct an LNG gas dispersion simulation in the cargo compressor room-equipped with an ME-GI engine-of a 174 K LNG carrier, the geometry of the room as well as the equipment and piping, are designed using the same 3D size at a 1-to-1 scale. Scenarios for a gas leak were examined under high pressure of 305 bar and low pressure of 1 bar. The pinhole sizes for high pressure are 4.5, 5.0, and 5.6mm, and for low pressure are 100 and 140 mm. The results demonstrate that the cargo compressor room will not pose a serious risk with respect to the flammable gas concentration as verified by a ventilation assessment for a 5.6 mm pinhole for a high-pressure leak under gas rupture conditions, and a low-pressure leak of 100 and 140 mm with different pinhole sizes. However, it was confirmed that the actual location of the gas detection sensors in a cargo compressor room, according to the new IGC code, should be moved to other points, and an analysis of the virtual monitor points through a computational fluid dynamics (CFD) simulation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.152-161
• /
• 2019

This research carried out a study on the job characteristics of the skipper of the coastal composite fishing vessels in order to find a way to prevent the ship collision caused by the highest human error among the marine casualty of fishing boats. Video observation was used as the research method in which six CCD cameras were installed on the vessel to collect image data and data extracted from the image were analyzed to derive the results of the functional activity of skipper according to the fishing operation process of experimental fishing vessel. The results are as follows. The working process of the experimental fishing vessel consisted of navigation for fishing ground, setting line, waiting for hauling line, hauling line and navigation to homeport. In these processes, the skipper was performing watchkeeping in the wheelhouse in which he carried out a single task, a dual task that performed two tasks simultaneously, and a triple task that performed two or more tasks simultaneously. In addition, one of the risk factors causing the collision was a no watchkeeping in the wheelhouse for navigating for fishing ground, waiting for hauling line, and hauling line at 25.4%, 64.6% and 0.3%, respectively among the marine casualty while drowsiness caused 1.2% of the marine casualty in navigating for fishing ground. Concurrent tasks that simultaneously perform two or more tasks that can overlook any other important duties while carrying out watchkeeping in the wheelhouse include 51.3% of navigation for fishing ground, 81.9% of setting line, 19.0% of waiting for hauling line, 87.9% of hauling, and 88.7% of navigation to homeport. The above concurrent tasks yielded an average of 66.1%. Experimental fishing vessels are required to focus on ship handling operations related to fishery operations, and the skipper is assigned more activities and attention to fishery related tasks. Therefore, it is considered desirable to build a collision prevention system that is appropriate to the characteristics of the skipper's work, escaping from transferring the responsibility of ship collision to the skipper completely.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.209-239
• /
• 2008

The purpose of this paper is to investigate the effectiveness of Korean port investment by using the newly developed slack-based multi-year panel congestion model of DEA(Data Envelopment Analysis). Inputs[port investment amount, cargo handling capacity, and berthing capacity], and outputs[cargo handling amount, number of ship calls, revenue, and score of customer service satisfaction] are used during 1994-2004 for 20 Korean seaports. Empirical analysis identified congestion especially in port investment as input at the ports of Gunsan, and Busan in the all 3 models, and the ports of Pyungtag, Mogpo, Yeosu, and leju in over 2 models. Port investment induced the rapid increase of port efficiency from the ports of Masan, Incheon, Donghae, and Samcheok. Therefore other ports except these ports should examine the reason about the inefficiency of port investment by searching out the situation of each ports directly. The main policy implication based on the findings of this study is that The Ministry of Land, Transport and Maritime Affairs in Korea should introduce the new measurement way after reviewing the multi-year slack-based congestion approach when the amount of port investment for each port is decided.

• Journal of Korea Port Economic Association
• /
• v.26 no.2
• /
• pp.82-98
• /
• 2010

The purpose of this paper is to suggest the efficiency measurement way of Korean seaport by using Average Index Transformation model of fuzzy DEA(Data Envelopment Analysis). Two inputs[cargo handling capacity, and berthing capacity], and outputs[cargo handling amount, and the number of ship calls] are used in 1995 and 2004 for 26 Korean seaports. Empirical main results are as follows: First, Tongyung, Gohyun, Okpo, and Sogcho Ports are efficient, and Yeasu Port shows the high efficiency level over 95% under input oriented CCR model. Gohyun and Sogcho Ports showed the most efficient score under average index transformation model. Okpo and Yeasu Ports increased their efficiency scores as the lamda(λ) values are up. The empirical results of fuzzy DEA average index transformation model for Wando, Yeasu, and Seoguipo ports showed that if the lamda values are higher, the efficiency scores are also higher. The main policy implication based on the findings of this study is that the management manager of Ministry of Land, Transport and Maritime Affairs in Korea should introduce the fuzzy DEA average index transformation model for deciding the size of inputs including the port investment amount and evaluating the port efficiency.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.573-581
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stacked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about $20\%$ compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.391-398
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stocked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about 20%compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.96-100
• /
• 2004

In the ship building industry various problems of erection is counterfeited due to formation of bottle necks in the block erection flow pattern This kind of problems cause accumulated problems in real-time erection right on the floor, When such a problem is approached, a support data of the entire erection sequence should be available, Here planning is done by reasoning about the future events in order to verify the existence of a reasonable series of actions to accomplish a goal. This technique helps in achieving benefits like handling search complications, in resolving goal conflicts and anticipation of bottleneck formation well in advance to take necessary countermeasures and boosts the decision support system, The data is being evaluated and an anticipatory function is to be developed This function is quite relevant in day to day planning operation. The system updates database with rearrangement of off-critical blocks in the erection sequence diagram, As a result of such a system, planners can foresee months ahead and can effectively make decisions regarding the control of loads on the man, machine and work flow pattern, culminating to an efficient load management. Such a foreseeing concept helps us in eliminating backtracking related adjustment which is less efficient compared to the look-ahead concept. An attempt is made to develop a computer program to update the database of block arrangement pattern based on heuristic formulation.