• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.227-232
• /
• 2004

Ballast water from ship harmful microorganism sterilized use of electrolytic sterilization system. The experimental methods were use of peristaltic flow pump upward on electrode pole. Due to reaction time, HRT were unlike microorganism on flow rate. In electrolysis, dioxide iridium coated titanium(Ti／IrO$_2$) and stainless steel plate were used for anode and cathode respectively. Current density controls make use of D.C Power supply on 250V 100Amper. Experimental use of current density between 0.1 and 0.5A was able to disinfect microorganism at 5 seconds by the reaction time. This study shows that the electrolyzed water has a potential for the sterilization of ballast water.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.206-208
• /
• 2013

The fact that the gigantic and luxurious cruise, Titanic, sank into the cold winter sea causing 1,490 casualties in 1912 resulted in discussing safety of life at sea international and Korea has adopted and operated the GMDSS to keep up with those international endeavors to decrease the number of tragic accidents at sea, However, all GMDSS equipment is making a monotonous beep sound when receiving a distress, emergency, safety and even general message so that it might contribute to lowering ship operators' cognitive abilities as well as being dull of safety precautions. So, I'd like to render great services for saving even one person by considering developing an automatic audio alarm device which allows people to respond in a prompt manner as soon as they hear an audion alarm such as a shipwreck.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.1
• /
• pp.73-80
• /
• 2008

An improved method to measure the dynamic viscoelastic properties of elastomers is proposed. The method is based on the analysis of forced oscillation of a cylindrical sample loaded with inertial mass. No special equipment or instrumentation other than the ordinary vibration measurement apparatus is required. Typical measurement of the viscoelastic properties of a silicone rubber $Silastic^{(R)}$ S2 were measured over the wide frequency range from 10 Hz to 3 kHz under the action of wide region of deformation from $10^{-4}%$ to 5%. It was shown that modulus of elasticity and loss tangent fall on the single curves when the ratio of load mass to sample mass changed from 1 to 20.

• Journal of Korean Society for Quality Management
• /
• v.48 no.3
• /
• pp.521-534
• /
• 2020

Purpose: This paper is to study the methodology of the development stage of the submarine vessel through the QMST/QCG system. Methods: In order to study the methodology for supporting the development stage of the submarine vessel system, the mission and role for QMST were defined, and the timing and detailed plans of the QCG review were established. Results: Through the analysis of the development stage of the ship's weapon system, QMST was formed, and roles were divided for each subdivision, and methods to effectively support the DAPA IPT were specified. In addition, QCG review timing and plans for submarine safety control lists were established. Conclusion: It is expected that the methodology in the development stage discussed in this study will be useful as a reference when supporting the general weapon system development stage in addition to similar equipment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1153-1158
• /
• 2010

In this paper, We make horizontal balancer (HB) and confirm a possibility of the technique that can be applied to ship through horizontal vibration reduction experiment. We use MATLAB as the simulator tool and experimental equipment consists of two induction motors shafts of which cam type unbalanced loads are fixed to, DSP and inverter circuit. Two induction motors perform roles as vibrator and balancer respectively, DSP control softwares such as speed, phase and vector control program. The simulation and experimental results show that the balancer characterizes good vibration reduction by phase control.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.193-202
• /
• 2014

The comprehensive review of the STCW 1978, as amended in 1995 and associated Code was carried out from 2006 to 2010. These amendments will have a certain degree of impact on Maritime Education and Training(MET) institutes in terms of education and training of seafarer worldwide. Particularly, the Far East region countries are effected more than other regions since they covered about 30% of officers and 37% ratings in the world. In view of these facts this dissertation conceived to analyze the problems in the Far East main seafarer supply countries faced the implementation of "STCW Manila Amendments" To analyze these problems, this dissertation carried out questionnaire research to 7 targeted main MET of major Far East seafarer supply countries. After research this dissertation suggests the possible solutions such as, Joint On-Board Training Center; Joint Asia Maritime E-learning Systems; methods to reducing work-load, ship inspection burden and determine mandatory minimum safety manning standards in a safe way; technical cooperation fund to installation of training equipment; and clarify vague terminology of STCW Manila Amendments, to solve problems identified through the questionnaires.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.23-29
• /
• 2016

Rotary machine is major equipment in industry. The rotary machine is applied for a machine tool, ship, vehicle, power plant, and so on. But a spindle fault increase product's expense and decrease quality of a workpiece in machine tool. A turbine in power plant is directly connected to human safety. National crisis could be happened by stopping of rotary machine in nuclear plant. Therefore, it is very important to know rotary machine condition in industry field. This study mentioned fault diagnosis algorithm with statistical parameter and empirical mode decomposition. Vibration locations can be found by analyze kurtosis of data from triaxial axis. Support vector of data determine threshold using hyperplane with fault location. Empirical mode decomposition is used to find fault caused by intrinsic mode. This paper suggested algorithm to find direction and causes from generated fault.

• Journal of the Korean Magnetics Society
• /
• v.24 no.4
• /
• pp.114-122
• /
• 2014

Since 1990, Agency for Defense Development (ADD) has been operating the nonmagnetic laboratory and the magnetic sensors laboratory to develop the key technology of the ship's magnetic silencing and to research the high performance magnetic sensors used in the weapon system and to perform the technical support for Republic of Korea Navy. Recently, the main test equipment in the laboratories has been upgraded to improve the measurement and analysis abilities against magnetic target and to evaluate the performance of the magnetic sensors. In this paper, the capability and the current state of magnetic test facilities of ADD are described.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.353-359
• /
• 2009

Most domestic container terminals are lack of container storage capacity compared to the throughput of container. The main reason is the difference between the theoretical capacity applied to the development of terminals and the real capacity of a berth Another reason seems to be the increase of the container crane in number per berth to match the need for the getting larger vessel, which is resulted from the increase of the berth capacity from the start. This study, therefore, aims to suggest the economic size of container yard by comparing the existing one. For this the berth capacity was recalculated, the required yard size derived considering up to 10,000TEU vessel and then cost comparison done.

• Journal of Ship and Ocean Technology
• /
• v.6 no.2
• /
• pp.12-22
• /
• 2002

Offshore pipelines play an important role in the transportation of gas, oil, water and oil products. It is common to have a group of pipelines in the oil and gas field. To reduce the installation cost and time, dual pipelines are designed. There are great advantages in the installation of dual pipelines over two separate single lines. It can greatly reduce the cost for trench, back-filling and installation. However the installation of dual pipelines often requires technical challenges. Pipelines should be placed to be stable against external loadings during installation and design life period. Dual pipelines in trench can reduce the influence of external forces. To investigate the flow patterns and forces as trench depth and slope changes, number of experiments are conducted with PIV(Particle Image Velocimetry) equipment in a Circulating Water Channel. Numerical approaches to simulate experimental conditions are also made to compare with experimental results. The velocity fields around dual pipelines in trench are investigated and analysed. Comparison of both results show similar patterns of flow around pipelines. It is proved that the trench depth contributes significantly on hydrodynamic stability. The trench slope also affects the pipeline stability. The results can be applied in the stability design of dual pipelines in trench section. The complex flow patterns can be effectively linked in the understanding of fluid motions around multi-circular bodies in trench.