• 한국산학기술학회논문지
• /
• 제21권6호
• /
• pp.103-108
• /
• 2020

일반적으로 LPG 운반선의 화물창은 국제해사기구(IMO)에서 정의한 독립형 탱크 Type A에 해당하며, 탱크의 외부는 폴리우레탄 폼으로 단열하고, 탱크는 영하 50도에서도 견딜 수 있는 값비싼 저온 강으로 제작된다. 따라서, 화물창 재료의 절감은 많은 비용의 절감으로 직결된다. 화물창은 외판, 격벽, 보강재, 웨브 프레임 및 스트링거로 구성된다. 그 중에서 외판, 격벽과 보강재는 구조해석 없이 선급 규정에 의해 설계될 수 있어 용이하게 최적 설계를 통해 설계된다. 하지만, 웨브 프레임과 스트링거는 구조해석을 통해 설계하고 선급승인을 받아야 하므로, 수없이 많은 구조해석을 포함하는 최적 설계는 사실상 수행하지 못하고, 수 십 번의 구조해석을 통해 설계치수를 결정하는 적정설계만을 수행하는 실정이다. 본 연구에서는 유한요소해석을 위해 2번 화물창을 대표 화물창으로 선정하여 8개의 하중조건을 적용하였고, 각 하중조건에 대한 선박 전체의 변형을 고려하였다. 또한, 탐색시간이 효과적인 미분 기반 최적화 기법을 통해 82,000 ㎥ LNG 운반선의 웨브 프레임을 대상으로 최소중량설계를 수행하였다. 본 연구를 통해 총 48개의 설계변수 치수를 결정하였고, 척 당 약 108 톤의 강재를 절감하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.280-280
• /
• 2012

DME(Dimethyl Ether) is the one of the massive energy sources synthesized from natural gas. KOGAS has already developed the commercial-scale production plant of DME and has been doing to obtain overseas resources to meet the domestic needs. This paper presents an experimental study on the evaporation phenomena of DME in FPSO or cargo vessel. The various moving motions, along with heat intake cause the evaporation of low temperature liquids in vessel's storage tank. The experimental result shows that the evaporation rate was changed with rolling degree and cycle and liquid level. The rolling motion leads to evaporate about 30~35% of total evaporation quantity and the rest amount from heat intake.

• 대한조선학회논문집
• /
• 제59권6호
• /
• pp.400-412
• /
• 2022

This paper provides the results of numerical and theoretical predictions of oil outflows from damaged single-hull and double-hull ships.Theoretical equations derived from the unsteady Bernoulli equation and a CFD method for multi-phase flow analysis were used to estimate the oil outflow rate from cargo tank. The predicted oil outflow rate from a single-hull cargo tank damaged due to grounding and collision accidents showed a good agreement with the available experimental results in both numerical and theoretical analyses. However, in the case of the double-hull conditions, the time variation of the amount of water and oil mixture inside the ballast tank predicted by the theoretical equation showed some different behavior from the numerical results. The reason was that the interaction of the oil flow with the water inflow in the ballast tank was not reflected in the theoretical equations. In the problems of the initial pressure condition in the cargo and ballast tanks, the oil outflow and water inflow were delayed at the pressure condition that the tanks were sealed. When the flow interaction between the oil and water in the ballast tank was less complicated, the theoretical and the numerical results showed a good agreement with each other.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.33-37
• /
• 2008

The evidence of the Cargo tank volume is very important between Buyer and Seller for agreement each other for LNG Ship. CTS(Custody Transfer System) Radar type level gauging sensor to be measured for cargo volume. The data of Trim & List sensor to be compensated for measuring data which is original data of the CTS sensor. The latest days, the Buyer would have posed a problem both the location and the accuracy of trim/list sensor specially neared final stage of the ship's delivery. So, we would like to report the introducing to the trim/list sensor and the confirmation of actual location for the trim/list sensor.

• 한국소음진동공학회논문집
• /
• 제13권10호
• /
• pp.791-797
• /
• 2003

A liquid storage rectangular tank structures are used In many fields of civil, mechanical and marine engineering. Especially, Ship structures have many tanks In contact with Inner or outer fluid, like ballast, fuel and cargo tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these thin walled tanks in contact with fluid near engine or propeller are strongly affected by added mass of containing fluid. Therefore it is essentially important to estimate the added mass effect to predict vibration of the tank structures. In the previous report, we have developed numerical tool of vibration analysis of 3-dimensional tank structure using finite elements for plates and boundary elements for fluid region. In the present report, using the numerical analysis, vibrations characteristics In deep water tank are investigated and discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1079-1084
• /
• 2003

A liquid storage rectangular tank structures are used in many fields of civil, mechanical and marine engineering. Especially, Ship structures have many tanks in contact with inner or outer fluid, like ballast, fuel and cargo tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these thin walled tanks ill contact with fluid near engine or propeller are strongly affected by added mass of containing fluid. Therefore it is essentially important to estimate the added mass effect to predict vibration of the tank structures. In the previous report, we have developed numerical tool of vibration analysis of 3-dimensional tank structure using finite elements for plates and boundary elements for fluid region. In the present report, using the numerical analysis, vibrations characteristics in deep water tank are investigated and discussed.

• 센서학회지
• /
• 제21권4호
• /
• pp.276-282
• /
• 2012

Vessels receive stress during their navigations as well as during their cargo operations. This stress may cause damages to the hull and may result in accidents. So the hull stress monitoring system(HSMS) is recommended in order to prevent these accidents. In this paper, we manufactured fiber Bragg grating(FBG) sensor and the model ship for towing tank experiments. The strain characteristics of the model ship on the water wave were measured through the towing tank experiment. The FBG sensors and electric strain gauges were attached on the connection jig, and then the characteristics of the FBG sensor were compared with those of the electric strain gauge. The strain of model ship was increased according to the increment of the amplitude of water wave. In particular, the largest strain was measured in the center of the model ship. As the wave period increased, the strain of model ship was decreased.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.33-34
• /
• 2015

북극항로(NSR)를 통항하는 상선과 화물량이 매년 중가추세에 있다. 쇄빙선의 도움을 받아 북극항로를 통항하는 상선의 안전한 항해를 위협하는 가장 큰 요인은 얼음과의 충돌이다. 따라서 선박과 얼음의 충돌 메커니즘을 규명하기 위한 노력이 관련 연구자들에 의해서 활발히 이루어지고 있다. 본 연구에서는 북극항로를 운항하는 내빙선과 유빙의 충돌을 가정한 예인수조실험을 실시하며, 충돌 후 얼음의 운동(속력, 궤적)을 머신비전검사를 통해서 계측한다. 아울러 오차계산을 통해서 머신비전검사 기법의 정밀도를 검증한다.

• Journal of Ship and Ocean Technology
• /
• 제12권1호
• /
• pp.35-44
• /
• 2008

As arctic energy resource is attracting public attention, arctic shipping market will also be growing in large as expected to increase in LNG trade from Arctic area to the western countries by shipping. During the voyages through such routes, collision with icebergs may be possible. In the present report, ice collision analyses are carried out from a practical point of view to verify the safety of hull structural strength of LNG carriers equipped with GTT $MKIII^{TM}$ membrane type cargo containment system. From the results of collision analyses and the operation-friendly design concept of no-repairing of cargo containment system, a safe operating envelope against ice collision is proposed for LNG carriers of membrane type cargo containment system. Based on the currently proposed safety criteria, it is concluded that LNG carriers with membrane tank type can operate safely with regard to the integrity of CCS in regions where collision between LNG carrier and iceberg is expected.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.132-140
• /
• 1993

LNG선은 극저온의 위험한 화물을 안전하게 격납, 운송해야 하기 때문에 일반 선박에 비해서 고도의 구조설계/해석 기술이 요구된다. 따라서 본고에서는 독립형 LNG탱크의 총체적인 구조안전성 평가과정을 다루었으며 구체적으로 다음과 같은 연구내용들을 포함한다. 1) 파랑하중의 직접계산, 선체 및 탱크의 응력해석 그리고 통계해석과정을 포함하는 파랑 응력의 장기분포해석. 2) S-N approach에 의한 피로강도 평가. 3) 피로균열 전파해석 및 LBF개념에 의한 구조안전성 평가. 본 제1보에서는 (1)(2)항에 중점을 두어 시설계 LNG선에 대한 예제계산을 수행하였으며 나머지 부분은 이어지는 제2보에서 상세히 다루어질 예정이다.