• Journal of Ocean Engineering and Technology
• /
• v.37 no.3
• /
• pp.99-110
• /
• 2023

When a fire accident accompanied by an explosion occurs, the surrounding firewalls are affected by impact and thermal loads. Damaged firewalls due to accidental loads may not fully perform their essential function. Therefore, this paper proposes an advanced methodology for evaluating the fire resistance performance of firewalls damaged by explosions. The fragments were assumed to be scattered, and fire occurred as a vehicle exploded in a large compartment of a roll-on/roll-off (RO-RO) vessel. The impact velocity of the fragments was calculated based on the TNT equivalent mass corresponding to the explosion pressure. Damage and thermal-structural response analyses of the firewall were performed using Ansys LS-DYNA code. The fire resistance reduction was analyzed in terms of the temperature difference between fire-exposed and unexposed surfaces, temperature increase rate, and reference temperature arrival time. The degree of damage and the fire resistance performance of the firewalls varied significantly depending on impact loads. When naval ships and RO-RO vessels that carry various explosive substances are designed, it is reasonable to predict that the fire resistance performance will be degraded according to the explosion characteristics of the cargo.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4335-4349
• /
• 2023

Nuclear marine propulsion has been emerging as a next generation carbon-free power source, for which proper passive residual heat removal systems (PRHRSs) are needed for long-term safety. In particular, the characteristics of unlimited operation time and compact design are crucial in maritime applications due to the difficulties of safety aids and limited space. Accordingly, a compact and long-term-operable PRHRS has been proposed with the key design concept of using both air cooling and seawater cooling in tandem. To confirm its feasibility, this study conducted system design and a transient analysis in an accident scenario. Design results indicate that seawater cooling can considerably reduce the overall system size, and thus the compact and long-term-operable PRHRS can be realized. Regarding the transient analysis, the Multi-dimensional Analysis of Reactor Safety (MARS-KS) code was used to analyze the system behavior under a station blackout condition. Results show that the proposed design can satisfy the design requirements with a sufficient margin: the coolant temperature reached the safe shutdown condition within 36 h, and the maximum cooling rate did not exceed 40 ℃/h. Lastly, it was assessed that both air cooling and seawater cooling are necessary for achieving long-term operation and compact design.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.161-172
• /
• 2024

Approximately 89% of all capsizing accidents involve small vessels, and despite their relatively high accident rates, small vessels are not subject to ship stability regulations. Small vessels, where the provision of essential basic design documents for stability calculations is omitted, face challenges in directly calculating their stability. In this study, considering that the majority of domestic coastal small vessels are of the Chine-type design, the goal is to establish the major hull form characteristic data of vessels, which can be identified from design documents such as the general arrangement drawing, as input data. Through the application of a deep learning approach, specifically a multilayer neural network structure, we aim to infer hydrostatic curves, operational draft ranges, and more. The ultimate goal is to confirm the possibility of directly calculating the initial stability of small vessels.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.357-366
• /
• 2014

On December of 2003, IMO's $23^{rd}$ Assembly discussed 'Guidelines on places of refuge for ships in need of assistance' At the discussion, Res. A.949(23) has been selected to appoint recommended place of refuge for countries signatory to the IMO Convention. IMO defines "Places of Refuge" as a places where a ship in need of assistance can take action to enable it to stabilize its condition and reduce the hazards to navigation, and to protect human life and the environment. Appointing and managing a Place of refuge can be a delicate problem because of its close connection to each country's coastal and environmental protection policies. However, in case of marine accident, the appointment or management of the place of refuge has a potential to avoid further damage and reduce to the minimum any environmental and estate losses. Currently a number of foreign countries, designated and operated a place of refuge. But, place of refuge selected method criteria were different by country and also does not have any standardized designating place of refuge model. Therefor, this study suggested the model of assigned places of refuge according to objective indication in order to assign reasonable and efficient places of refuge in domestic waters in the future by investigating and analyzing imported facts in considering the assignment of places of refuge in foreign countries and describing these imported data into quantitative value. In designating the model place of refuge, the final place of refuge location was presented by evaluating the probability of marine accidents, analyzing the location, and evaluating the supporting establishment.

• Journal of Navigation and Port Research
• /
• v.42 no.1
• /
• pp.25-30
• /
• 2018

This study was carried out to analyze the risk attitude based on situation awareness of the Vessel Traffic Service Operator (VTSO) on the risk of collision between vessels during the monitoring of vessel traffic through the use of the VTS system. In general, when two vessels are in the close quarters situation, we analyzed the degree of risk of collision from the subjective viewpoint of the VTSOs through an administered survey. Chiefly, we analyzed the risk attitudes of each VTSO in the close quarters situation, by comparing it with the calculated value by the CoRi, which is the ship collision risk model from the VTSO's viewpoint. As a result, it was confirmed that more than 40% of the total VTSO was noted as being in a weak risk aversion type of category. Through a review of the results of analyzing the risk attitude of VTSO according to gender, age, VTS career, VTS center position, accident experience, and boarded career, it was found that there was a significant difference in the VTS career, VTS center position and accident experience. In addition, a regression model that is able to further explain the risk attitude of VTSO was derived as a factor that confirmed the significant difference and applied to CoRi to predict the collision risk according to the individual VTSO to be used as a fundamental information gathering tool for providing more accurate and safe VTS service at sea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.474-482
• /
• 2021

An average of two to three typhoons that occur in the Philippines or Taiwan pass through Korea each year owing to the influence of the geographical location and western winds. Because Jinhae Bay is known as Korea's representative typhoon refuge, it is filled with ships during typhoons and later becomes saturated with ships anchored to the surrounding routes. If a strong wind drags an anchored ship, a collision accident may occur because of the short distance between the ships. Therefore, a systematic anchoring safety management of Jinhae Bay is required. In this study, the minimum wind speeds of a dragging anchor based on the water depths of Jinhae Bay anchorages were investigated. When 7-9 shackles were given, the minimum wind speeds were 48-63, 46-61, and 39-54 knots at depths of 20, 35, and 50 m, respectively. As the water depth increased, the length of the cable laid on the sea bed became shorter than 5 m owing to the external force, and the minimum wind speed showed a significant difference of 4-8 knots. In addition, ships with high holding power anchors (AC-14 type) had higher minimum wind speeds than ships with conventional anchors (ASS type). Finally, it was confirmed that at a depth of 50 m, dragging easily occurred even when a high holding power anchor was applied.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.118-126
• /
• 2023

In accordance with the increased demand for ocean use, the Marine Spatial Planning system was introduced to rationally allocate ocean space, under which fishing activity protection zones have been designated to protect fishery activities and promote fishery resource protection. However, fishing vessels that mainly sail in fishing activity protection zones are exposed to risk, such that they account for about 70% of marine accidents that occur in Korea, Proper risk management is thus required. This study aims to analyze marine accidents in fishing activities protection zones and port and navigation zones to secure the safety of fishing vessels passing within fishing activity protection zones. To this end, the traffic volume in marine use zones was investigated, and marine accidents were investigated by ship type, accident type, tonnage, accident cause, and loss of life. Analysis determined that most of the marine accidents per unit area of each type occurred in port and navigation zones, but overall most marine accidents occurred in fishing activity protection zones. In particular, it was found that traffic safety management was necessary because many human accidents occurred.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.18-23
• /
• 2017

The shipyard quay process struggles to control workers and maintain a secure working environment because of the presence of at least 1,000 people. Therefore, safety accidents such as an explosion or a fire are likely to occur. With the recent increase in safety accidents at shipyards, the requirements for safety and process monitoring have been strengthened. Major shipyards are conducting researchto monitor the process in real time and to detect the work environment for safety. In this paper, we propose a safe and accurate evacuation route based on the information of the dangerous area and the user's location based on a mobile application to reduce the casualty accidents in the presence of many personnel in a concentrated area. To do this, we analyze the trend of the fire escape system on the ground building, compare various algorithms for escape route calculation, select appropriate algorithms for this study, and perform programming. A basic experiment was conducted to confirm the results. The proposed method is expected to be used in large ship construction sites, passenger ships and large public facilities to reduce accidents in the case of a safety accident.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.34
• /
• pp.77-108
• /
• 2007

The traditional name given to the insurance of third party liabilities and certain contractual liabilities which arise in connection with the operation of ships is protection and indemnity(P & I) insurance. P & I insurance is very different from traditional hull and machinery insurance in that shipowners' hull and machinery insurance is designed primarily to protect the assured against losses to his vessel, whereas P & I insurance seeks to indemnify an shipowner in respect of the discharge of legal liabilities he has incurred in operating his own vessels. This study is to examine the background of establishment of British P & I clubs md, therefore, the identity of P & I insurance. The present British P & I clubs are the remote descendants of the many small and local hull mutual insurance clubs that were formed by British shipowners in the end of 18th century. At that time, British shipowners were dissatified with the state of marine insurance market and, therefore, established clubs together in mutual hull insurance clubs. After the removal of the company monopoly in 1824, greater competition had a good effect on the rates, terms of cover and service offered by the commercial marine insurance market and by Lloyd's underwriters, and the hull clubs became less necessary and went into decline. The burden of British shipowners on liabilities to third parties was steadily increased after the middle of the 19th century, but the amount insured under hull policy was limited in the insured value of the ship. Eventually, the first protection club, that is, the Shipowners' Mutual Protection Society was formed in 1855. It was designed to like past mutual hull clubs, but to cover liabilities for loss of life and personal injury and also the collision risks excluded from the current marine policies, particularly the excess above the limits in hull policies. In 1870, the risks of liability for loss of or damage to cargo carried on board the insured ship was first awarded by the British shipowners. After 1874, many protection clubs formed indemnity club to cover the risk of liability for loss or damage to cargo. As mentioned above, British P & I clubs have been steadily changed according to the response of shipowners under the rapidly changing law of British shipowners' liability, and so on in the future.

• Proceedings of KOSOMES biannual meeting
• /
• 2009.06a
• /
• pp.79-84
• /
• 2009

Recently, the degree of navigating vessel's risk is increasing significantly by growing of vessel's volume and increasing of marine facilities, marine bridges and port development etc. As a result, Ministry of Land, Transport and Maritime Affairs generalized formal Maritime Safety Audit as a comprehensive maritime traffic safety management system in order to ensure safety improvements from the planing to maintaining of the development which influence to maritime traffic environment. A MSA is a formal safety performance examination of an existing or future fairway by an audit team. It qualitatively estimates and reports on potential risk of Maritime traffic safety and identifies the measure for improving in safety of human life and preservation of environment. This paper introduced the outline of MSA policy as the guideline for making audit reports is on its developing which is mainly processed by Maritime Safety Research Center, KST in cooperation with KMU, MMU and KORDI.