• 한국항해항만학회지
• /
• 제31권1호
• /
• pp.1-6
• /
• 2007

우리나라의 경우 선박조종시뮬레이션을 이용한 선박 통항의 안전성 평가는 흔히 목표선 분석으로 이뤄지고 있다. 이 논문에서는 목표선 분석만으로 이뤄지는 통항 안전성 평가의 위험성을 경고할 목적으로 하나의 예로서 한국해양수산연수원의 선박조종시뮬레이터를 이용하여 15,000 TEU급 컨테이너 선박이 풍속 26노트 풍향 NW의 바람과 낙조류 2.2노트의 조류에서 광양항 항로를 따라 출항하는 시뮬레이션을 실시하고 그 결과에 대하여 목표선 분석과 연속분석을 실시하였다. 이들을 비교 분석한 결과 광양항 항로 중 굴곡부의 한곳에서는 목표선 분석에 의한 침범확률이 연속 분석에 의한 침범 확률보다 다소 크게 나타나고 있는데 이는 목표선 분석만으로도 통항 안전성 평가하는 것은 위험이 따를 수 있음을 제시하는 사례로 판단된다. 그 외에 이 논문에서는 현행의 연구의 항로중심에서 선박의 중심이 벗어난 값을 이용하지 않고 선측의 끝에서 항로경계까지를 최근접거리로 하는 근접도 평가를 제시하였다.

• 해양환경안전학회지
• /
• 제24권6호
• /
• pp.670-678
• /
• 2018

선박의 통행량이 많은 연안해역은 선박들 사이에 복잡한 조우상황이 자주 발생하기 때문에 충돌사고의 가능성이 높다. 따라서 해상에서 충돌사고를 줄이기 위해서는 항해사의 국제충돌예방규칙(COLREG) 준수에 더하여 정량적인 충돌위험평가가 요구된다. 본 연구에서는 선박의 계획항로에 대한 충돌위험을 평가하기 위한 새로운 충돌위험도 평가시스템이 개발되었다. 먼저 기존의 충돌위험 평가모델들을 검토함으로써 적절한 충돌위험 평가방법이 제시되었다. 시스템은 MATLAB을 사용하여 개발되었으며 해도, 범퍼 및 평가의 세 부분으로 구성된다. 개발된 시스템은 시험을 위해 간단한 계산조건으로 시험해역에 적용되었으며, 그리고 검증을 위해 실제 계산조건으로 실제해역에 적용되었다. 그 결과 충돌위험은 자선의 길이, 항해시간 및 항로 등에 의해 영향을 받는 것으로 나타났다. 개발된 시스템은 항해사가 출항전 최적안전항로를 선택하는데 도움을 줄 수 있을 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.637-640
• /
• 2005

The mechanical properties of bellows, such as the extensibility and the strength can be changed depending on the shape. For the shipbuilding material, it is favorable that the fatigue lift is long due to the elastic property and the reduction of thermal stress in piping system. Nowadays, the domestic production and design of bellows are based on the E.J.M.A Code. Therefore, the design standard is in need because of much errors and lack of detailed analysis. In this study, it is attempted to find out the optimal shape of U-type ship's bellows that is applied to design of experiment using the finite element method. The effective factors, mountain height, length, thickness, and number of mountains and the length of joint are considered and the proper values are chosen for the simulation. The number of mountains are increased, the volume increases above the standard volume and the stress obviously increases. In addition, the effect of the thickness of bellows on the stress is very large. Both of the volume and stress are decreasing at a certain lower value region.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.794-802
• /
• 2018

The ice resistance series charts for icebreaking ships were developed through a series of systematic model tests in the ice tank of the Korean Research Institute of Ship and Ocean Engineering (KRISO). Spencer's (1992) component-based scaling system for ship-ice model tests was applied to extend the model ship correlations. Beam to draft ratio (B/T), length to beam ratio (L/B), block coefficient ($C_B$) and stem angle (${\alpha}$) were selected as geometric parameters for hull form development. The basic hull form (S1) of twin pod type with B/T of 3.0, L/B of 6.0, $C_B$ of 0.75 and stem angle of $25^{\circ}$ was generated with a modern hull design concept. A total of 13 hulls were designed varying the geometric parameters; B/T of 2.5 and 3.5, L/B of 5.0 and 7.0, $C_B$ from 0.65 to 0.85 in intervals of 0.05, and 5 stem angles from $15^{\circ}$ to $35^{\circ}$. Ice resistance tests were first carried out with the basic hull form in level ice with suitable speed. Four more tests for $C_B$ variations from 0.65 to 0.85 were conducted and two more for beam to draft and length to beam ratios were also performed to study the effect of the geometric parameters on ice resistance. Ice resistance tests were summarized using the volumetric coefficient, $C_V$ ($={\nabla}/L^3$), instead of L/B and $C_B$ variations. Additional model tests were also carried out to account for the effect of the stem angle, ice thickness and ice strength on ice resistance. In order to develop the ice resistance series charts with a minimum number of experiments, the trends of the ice resistance obtained from the experiments were assumed to be similar for other model ship with different geometric parameters. A total of 18 sheets composed of combinations of three different beam to draft ratios and six block coefficients were developed as a parameter of $C_V$ in the low speed regions. Three correction charts were also developed for stem angles, ice thickness and ice strength respectively. The charts were applied to estimate ice resistance for existing icebreaking ships including ARAON, and the results were satisfactory with reasonable accuracy.

• 해양환경안전학회지
• /
• 제20권5호
• /
• pp.535-542
• /
• 2014

본 연구에서는 해상교통혼잡도에 영향을 미치는 요소인 선박점용영역크기, 선박의 속력, 항로폭에 대한 민감도 분석을 실시하였으며, 가장 민감한 요소로 선박점용영역을 도출하였다. 선박점용영역에 대해 일본, 덴마크 해협, 중국 상하이항에서의 점용영역에 대한 기존 연구사례를 조사하고, 우리나라 진해만 피항시의 해상교통관측조사를 통한 선박점용영역을 도출하여 비교 분석하였다. 민감도 분석결과, 선박속력 1노트 변화시 10 %, 항로폭 100미터 변화시 18 %, 점용영역 장직경 1L 변화시 34 %~43 %의 영향이 미치는 것으로 분석되었다. 그 결과, 현행 진단제도에서 사용하는 $8L{\times}3.2L$, $6L{\times}1.6L$은 일본의 $3.5L{\times}1.5L$, 중국 상하이항 $5.9L{\times}2.2L$, 덴마크 해협 $4L{\times}5B$ 및 진해만 피항시의 선박점용영역 $3L{\times}2L$과 큰 차이가 있음을 확인하였다.

• 한국정보통신학회논문지
• /
• 제15권4호
• /
• pp.773-779
• /
• 2011

자유전단류(Shear free flow) 가정을 이용한 수상함 항적모델을 잠수함에 적용 결과 잠수함 난류항적 지름은 $x^n,\;({\frac{1}{5}}{\leq}n\;<{\frac{1}{2}})$ 에 비례하였으며, 난류항적의 최소 확산을 가정할 때(${\sigma}=50.25$, 즉 ${\infty}\;x^{1/5}$인 경우), 길이65m, 폭 6.5m 속력 6kts 인 잠수함의 난류항적 반지름은 잠수함 함미로부터 1.2Km 후방에서 약 20m, 10Km 후방에서는 약 30m에 달하였고, 해수면에서 관측 가능한 잠수함 난류항적은 잔잔한 해상상태에서 잠수함 후방 약 15Km에 이르는 것으로 나타났으나 쇄파가 발생하는 악천후에서는 해수면에서 난류항적을 관측하기는 매우 제한되었다. 이는 적어도 서해와 같이 얕은 잠수함 작전환경에서는 잠수함 난류항적이 해수면에서 나타나는 것을 의미하며 SAR와 같은 탐지체계를 이용 시 탐색 가능함을 의미한다.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.363-371
• /
• 2019

Thousands of demersal fishes inhabit in the waters around Korea and most of them are overexploited. One of reasons is technological development, which increases the efficiency of the vessels continuously. The analysis was conducted to identify the change of fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the Danish seine fishery from 1960s to 2010s. Gross tonnage was decreased stably, but the horse power was increased annually. The length of ground rope, warp and hand rope was somewhat longer, but changed a little. Color fish finder was utilized from the mid-1960s and positioning system was used five years later. A hydraulic line hauler were introduced in the mid-1980s, and supply rate was gradually increased. Surveys on the supply and upgrading of fishing equipment utilized visiting researchers. Therefore, the relative fishing power index in the Danish seine fishery increased stably from 1.0 in 1970 to 1.0 in 1980, to 1.2 in 1990, to 1.3 in 2000 and to 1.3 in 2010. The results are expected to contribute to reasonable fisheries stock management.

• 수산해양기술연구
• /
• 제34권1호
• /
• pp.62-66
• /
• 1998

The maneuverabilities of the training ship M.S. HEUIMANGBONG were studied, based on the data obtained from her Z test. The results obtained were summerized as follows: 1. The maneuvering indices K' and T'of the M.S. HEUIMANGBONG were 0.542, 1.305 at 10$^{\circ}$Z Test and 0.433, 1.351 at 20$^{\circ}$Z test and 0.442, 1.388 at 30$^{\circ}$Z test respectively. The above calculated values K', T' showed that her maneuverabilities were more effective when her rudder was used to small angle than to large angle. 2. As the overshoot angles of the starbord side of the M.S. HEUIMANGBONG were larger than those of port side at 10$^{\circ}$, 20$^{\circ}$and 30$^{\circ}$Z test, her maneuverabilities in port turning were found to be higher than in starbord turning. 3. The running distance of a turn at her 10$^{\circ}$Z test was about 9.9 times her own length and she was considered to have a good maneuverabilities synthetically

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권1호
• /
• pp.37-48
• /
• 1984

For the designing propulsion shafting of ship, shaft diameters are usually calculated according to the Society's rules and other scantlings such as a shaft length, coupling and taper parts, etc., are decided according to calculated diameters. And then, the torsional vibration, the lateral vibration and shaft alignment should be reviewed to check whether the resonance points of torsional or lateral vibration appear within the normal operating speed range and the shaft alignment is reasonable. If the results of calculations are unsatisfactory, this process should be repeated until the final condition is determined and the process of this work takes much time to carry out. To simplify the above tedious processes, authors have developed a computer program to fulfill the above design processes at once. This program takes aim at reducing the manual calculating work associated with the propulsion shafting of ship. To confirm the availability of developed computer program, several propulsion shaftings which are driven by diesel engines, have been analysed. The results calculated by authors developed computer program show comparatively good agreements with those of the actual propulsion shafting.

• 대한조선학회지
• /
• 제24권1호
• /
• pp.35-41
• /
• 1987

An approximate method for calculating added resistance due to regular wave reflection has been established. In order to confirm the applicability of this method, an experimental work was carried out using a Series 60 model with oscillations in the 6-degrees of freedom restricted. Particular attention was paid to the case of the shorter wave length range where the effect of wave reflection is dominant compared to the effects of the ship's motions($\lambda/H=10.6-101.0,\;\lambda/L=0.23-1.18,\;F_n=0.10-0.25$). When comparing the measured and the computed resistance due to wave reflection in a head sea, good agreement is shown. This paper is based on research done by the Author as a member of the Ship Performance Group in the Department of Naval Architecture and Shipbuilding of the University of Newcastle-upon-Tyne in England, under the supervision of Dr. R.L. Townsin.