• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.164-170
• /
• 2013

With the introduction of increasingly large-sized ships, the conditions of main domestic port facilities remain the same as in the past. So, there is high probability that marine traffic congestion can occur at the certain ship's routes. The standard ship's length used to assess the marine traffic congestion of domestic trade port is 70 meters. It has been in use for the last 30 years, so, its usefulness is highly recommended for review. This study deeply analyzes the tendency of ship's dimensional changes according to recent enlargement of ship's size by utilizing the particulars of 60,000 ships saved in domestic Port-MIS database and suggests the standard ship's length by figuring out the correlation between length of ship and gross tonnage. In addition, the basis of statistical data on the ship's tonnage in domestic trade over the last five years suggests the standard ship's length by deriving the reference point of cumulative incidences that occupy more than over 50 %, except for small vessels. It is necessary to consider the characteristic of each domestic trade port before the actual application of suggested standard ship's length.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.2
• /
• pp.23-27
• /
• 1999

When a ship is running in following and quartering seas and on a crest with the ship′s length being nearly the same as the wave length, ship′s stability will be lost most; "T" shape crests with highly concentrated energy will appear during the process of transformation from irregular waves to regular ones, and the ship may be under continuous impact of large waves for a long period of time; Synchronism will also appear when the ship′s natural period of rolling and period of encounter are close to each other. For safe navigation, proper stability should be well ensured, proper speed and course chosen with speed under 1.8L1/2 kn (L is the ship′s length), initial listing avoided, special attention paid to steering.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.102-113
• /
• 2004

A name of 'Sea Ship' and 'River Ship' had been used based on the comprehension for the difference of ship's hull form in Chosun period. We can find a number of literature describing the situation which transferred the cargo from Sea Ship to River Ship because Sea Ship could not go upstream in the river of which the current is fast and the water depth is low. The reason why Sea Ship could not go upstream was that the bottom of Sea Ship was narrow, it means the non-flat bottom. Generally Sea Ship had short length, wide breadth, so L/B of 2.2∼3.0, and high draft and depth. River Ship has long length, narrow breadth, so L/B of 5.0∼6.3, and low draft and the flat bottom in order to adapt to the low water depth of the river.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.57-63
• /
• 2003

Marine traffic system is composed of ship, ship's operators and traffic environment The navigation channel is a part of traffic environment and the design of channel is a crucial factor for safe navigation This paper aims to evaluate ship-handling difficulty in straight and bend channels with an Environmental Stress model(ES-model). The ES-model is used to evaluate ship handling difficulty quantitatively on the basis of the ship operator's subjective judgement for safety in navigation The calculation of ES value was made on the basis of three factors such as channel width, ship's length and speed in straight and channels for safe navigation. The interrelation between factors was analyzed and reasonable design standards of channel width, ship's length and speed were proposed for safe navigation of ship in bend channel.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.144-147
• /
• 2004

Two different sensors (here, KOMPSAT and RADARSAT) are considered for ship detection, and are used to delineate the detection performance for their data. The experiments are set for coastal regions of Mokpo Port and Ulsan Port and field experiments on board pilot boat are conducted to collect in situ ship validation information such as ship type and length. This paper introduce mainly the experiment result of ship detection by both RADARSAT SAR imagery and landbased RADAR data, operated by the local Authority of South Korea, so called vessel traffic system (VTS) radar. Fine imagery of Ulsan Port was acquired on June 19, 2004 and in-situ data such as wind speed and direction, taking pictures of ships and natural features were obtained aboard a pilot ship. North winds, with a maximum speed of 3.1 m/s were recorded. Ship's position, size and shape and natural features of breakwaters, oil pipeline and alongside ship were compared using SAR and VTS. It is shown that KOMPSAT/EOC has a good performance in the detection of a moving ship at a speed of 7 kts or more an hour that ship and its wake can be imaged. The detection capability of RADARSAT doesn't matter how fast ship is running and depends on a ship itself, e.g. its material, length and type. Our results indicate that SAR can be applicable to automated ship detection for a VTS and SAR combination service.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.160-161
• /
• 2012

The traditional theory regarding the pivot point of a ship during maneuvering, so called apparent pivot point, is located nearly at 1/3 ship's length from the bow when the ship is moving ahead, and between 1/4 ship's length from the stern and the rudder post when going astern. The pivot point is sometimes considered to be the centre of leverage for forces acting on the ship. However, the pivot point is located out of ship due to strong lateral force, such as current and it is very inconvenient to use during maneuvering a ship. In this paper firstly, pivot points due to ship's condition are investigated carefully. And then the center of lateral resistance used at the present are determined. While a new lateral force is added, we can compare the pivot point with the center of lateral forces. Finally, we will suggest the center of all lateral forces for maneuvering instead of pivot point. Especially, it will be very helpful for pilots to handle ships in simulation.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.97-114
• /
• 1986

Ship's maneuverability is very important factor in safe ship handling and economical ship operation. Steering characteristics are consisted of course stability and maneuverability. Today in many advanced ship-building countries, they study ship's course stability, using model ship tests, such as straight line tests, rotating arm tests and Planar Motion Mechanism (PMM) etc., in tow in tanks. It is the purpose of this paper to provide ship's handlers with better understanding of steering characteristics and to help them in safe controlling and manevering . In this paper, the author simulated response of various vessels, running straight course with constant speed, and they are disturbed by small external disturbance of one degree yaw angle with no angular velocity . The author used the hydrodynamic derivtives resulted at tests of Davidson's laboratory in Stevens Institute of Technology, New Jersey, U.S.A. Course stability was evaluated and analyzed in various respects, such as block coefficient, ratio of ship's length to beam, draft and rudder area ratio etc. The obtained results are as follows : (1) The ship's course stability is affected by magnitude of block coefficient greatly. In case that the block coefficient is more than 0.7, the deviation varies at nearly same rate but the requistite time to reach the steady course is different. (2) The ship's course stability is affected by magnitude of L/B. When the dimensionless time reaches about 3, the deviation and requisite time to reach the steady course are influenced nearly same. After the dimensionless time is about 3, they change on invariable ratio. (3) The effect to course stability by L/T and RA' can be neglected. (4) The reason why thy VLCC and container feeder vessel are unstable on their course is that their block coefficient is generally more than 0.8 and the ratio of ship's length to beam is about 6.0.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.83-96
• /
• 1986

In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.1
• /
• pp.29-33
• /
• 1983

The loading condition, of a ship, especially a multi-purpose cargo carrier, in service, is often changed. Then, the prediction of natural frequency changes is necessary to provide measures for prevention of ship vibrations. In this paper a simplified method for the above purpose is presented. The bases of the method are analytical solutions for the lateral vibrations of uniform Timoshenko beams carrying a concentrated mass and the Dunkerley's formula. In this method a ship in the standard ballast condition is reduced to a uniform Timoshenko beam having same system parameters as those of the midship section. To investigate the validity of the proposed method, numerical calculations are carried out for a 46,000 DWT bulk carrier and compared with detailed calculations based on the finite difference method. Even in cases those the cargoes in a hold, length of which is about 13% of the ship's length, are reduced to a concentrated mass, the proposed method gives results of several percent differences from the detailed calculations up to the six-noded mode.

• Journal of the Korean Institute of Navigation
• /
• v.1 no.1
• /
• pp.27-44
• /
• 1977

The Maneuvering Indices of a ship are the values that decide the quantity of her motion in turning when her rudder is turned over to an angle to the starboard or the port. They consist of two kinds of indices, one of which is called index K and the other, index T. Index K decides a ship's turning ability and index T does the length of time delay of a normal turning motion after her rudder has finished the turn of an ordered angle. Generally, the values of the indices are calculated through some mathematic formulas with figures of her heading degrees recorded at a fixed time intervals during her Z test. The values of the same kind index of a ship appear differently according to the ship'sspeed, trim, rudder angle and loaded condition, etc. In this paper, the author analyzed all the amthematic formulas required to calculate the values of the indices in their forming process and examined them from the point of mathematics and dynamics and also actually figured out the values of maneuvering indices of the M.S. "HANBADA", the training ship of Korea Merchant Marine College through her Z test. The author supposed a case in which two same typed ships as the "HANBADA" in size, shape and conditions were approaching each other in meeting end on situation and each ship turned her rudder hard over to the starboard respectively when they approached to the distance of 3 times as long as the ship's length. The author worked out mathematic formulas calculating forward and transverse ship's motions within the above mentioned situation for the quantative analysis of the collision avoding action to certify whether they are in collision status or not. Applying the calculated values of the maneuvering indices of the "HANBADA" to the motion calculating formulas, the author found out the two ships were passing over each other with the clearing distance o 39m between their port quarters. With the above mentioned examinations and explanations, the author demonstrated that a ship's motion in any collision avoiding action can be shown with quantities of time and distance within reliable limit.istance within reliable limit.