• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.152-161
• /
• 2017

The CBTC(Communication based Train Control) system employed on 2.4GHz ISM band adopt the IEEE802.11.x standard. Therefor communication time delay, distortion and data losses will be produced. To overcome these problems, CPSK(Continuous Phase shift keying) modulated DS/SS(Direct Sequence Spread Spectrum) transmitter with 908MHz carrier frequency is proposed. Through the eye diagram and scatter diagram the performance is analysed. And the phase noise characteristic of the local oscillator is measured about 60dBc/Hz, this means that the phase noise performance is very good compared to the signal. Reference frequency suppression of the 2nd local oscillator is 50dB below compared to the signal. Through the polarities of the complementary signal equally probable, the line spectrum of the output spectrum is eliminated. The nonlinear effects which introduce the spectral spreading or spectral regeneration is reduced remarkably.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.47-55
• /
• 2019

The robot is the creation of new markets and various cooperation according to the manufacturing paradigm shift. Cooperative management easy for existing industrial robots, robots work on productivity, manpower to replace the robot in every industry cooperation for the purpose of and demand increases.to exist But the industrial robot at the scene of the cooperation working due to accidents are frequent, threatening the safety of the operator. Of industrial site is configured with a robot in an environment ensuring the safety of the operator to and confidence to communicate that can do the possibility of action.Robot guard system of the need for development cooperation. The robot's cooperation through the sensors and computer vision task within a radius of the double to prevent accidents and accidents should reduce the risk. International protocol for a variety of industrial production equipment and communications opc ua system based on ultrasonic sensors and cnn to (Convolution Neural Network) for video analytics. We suggest the cooperation with the robot guard system. Robots in a proposed system is unsafe situation of workers evaluating the possibility of control.

• Journal of Hydrogen and New Energy
• /
• v.29 no.1
• /
• pp.11-18
• /
• 2018

A high efficiency integrated reforming system for improving the efficiency of the 5 kW PEMFC system used as the back up power of building was studied. The separated reforming system consisted of three parts - A steam reformer with two stage concentric circular shape, a heat exchanger type steam generator and a CO shift reactor. Temperature and steam carbon ratio (SCR) were control variables during operation. The operating conditions were optimized based on the thermal efficiency of the steam reformer as reformate gas composition changes at different temperature. In experiments, water was fully vaporized in the steam generator up to SCR 3.5 and the maximum thermal efficiency was achieved at the operating temperature around $700^{\circ}C$ in the steam reforming reactor. With the results of the separated reforming system research, we improved the shape of high efficiency integrated reformer. The performance evaluation of the integrated reformer was based on optimized operating conditions in SCR 3.5. As a result, the developed integrated reforming system maintained an efficiency of 76% and constant performance over 3,000 hours.

• KSBB Journal
• /
• v.31 no.4
• /
• pp.270-276
• /
• 2016

In glycoprotein, Terminal sialic acid residues of N-linked glycan are imperative things because they prevent the recognition from asialoglycoprotein-receptor that affect the half-life of glycoproteins. So establishment of culture process for enhancing sialic acid is important to maximize sialic acid contents of glycoprotein. In this study, we investigated effects of biphasic culture of Chinese hamster ovary (CHO) cells producing albumin-erythropoietin to increase sialylation. Biphasic cultures were performed with shift of $CO_2$ concentrations and temperatures at day 5 when viable cell density was decreased and sialidase was started to be released by cell lysis. The examined temperature set points were 33, 35 and $37^{\circ}C$ respectively and the $CO_2$ concentration was 1, 5, 10 and 15%. We confirmed that sialidase activity was the lowest in biphasic culture that was shifted from normal culture condition to 1% of $CO_2$ and $33^{\circ}C$ on day 5. However, the temperature and concentration of $CO_2$ have little effect on activity of ${\alpha}2,3$-sialyltransferase. Also, sialic acid contents were enhanced 1.13-fold higher than that in control culture. In conclusion, Biphasic cultivation in CHO cells led to inhibition of sialidase activity and increases of sialylated glycan.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.368-368
• /
• 2008

Ion implantation has been widely developed during the past decades to become a standard industrial tool. To comply with the growing needs in ion implantation, innovative technology for the control of ion beam parameters is required. Beam current, beam profile, ion fractions are of great interest when uniformity of the implant is an issue. Especially, it is important to measure the spatial distribution of beam power and also the energy distribution of accelerated ions. This energy distribution is influenced by the proportion of mass for ion in the plasma generator(ion source) and by charge exchange and dissociation within the accelerator structure and also by possible collective effects in the neutralizer which may affect the energy and divergence of ions. Hydrogen atom has been the object of a good study to investigate the energy distribution. Hydrogen ion sources typically produce multi-momentum beams consisting of atomic ion ($H^+$) and molecular ion ($H_2^+$ and $H_3^+$). In the beam injector, the molecular ions pass through a charge-exchanges gas cell and break up into atomic with one-half (from $H_2^+$) or one-third (from $H_3^+$) according to their accelerated energy. Burrell et al. have observed the Doppler shifted lines from incident $H^+$, $H_2^+$, and $H_3^+$ using a Doppler shift spectroscopy. Several authors have measured the proportion of mass for hydrogen ion and deuterium using an ion source equipped with a magnetic dipole filter. We developed an ion implanter with 50-KeV and 20-mA ion source and 100-keV accelerator tube, aiming at commercial uses. In order to measure the proportion of mass for ions, we designed a filter system which can be used to measure the ion fraction in any type of ion source. The hydrogen and helium ion species compositions are used a filter system with the two magnets configurations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.21-26
• /
• 2008

We fabricated nano-particles of ZnO, $In_2O_3$ and $SnO_2$ by using the chemical reaction between metal thin films and polyamic acid. The average size and density of these ZnO, $In_2O_3$ and $SnO_2$ nano-particles was approximately 10, 7, and 15 nm, and $2{\times}10^{11},\;6{\times}10^{11},\;2.4{\times}10^{11}cm^{-2}$, respectively. Then, we fabricated nano-floating gate memory (NFGM) devices with ZnO and $In_2O_3$ nano-particles embedded in the devices' polyimide dielectrics and silicon dioxide layers as control and tunnel oxides, respectively. We measured the current-voltage characteristics, endurance properties and retention times of the memory devices using a semiconductor parameter analyzer. In the $In_2O_3$ NFGM, the threshold voltage shift (${\Delta}V_T$) was approximately 5 V at the initial state of programming and erasing operations. However, the memory window rapidly decreased after 1000 s from 5 to 1.5 V. The ${\Delta}V_T$ of the NFGM containing ZnO was approximately 2 V at the initial state, but the memory window decreased after 1000 s from 2 to 0.4 V. These results mean that metal-oxide nano-particles have feasibility to apply NFGM devices.

• Journal of East-West Nursing Research
• /
• v.17 no.1
• /
• pp.31-39
• /
• 2011

Purpose: The purpose of this study was to grasp the subjectivity of the nursing students toward CAM and put the outcomes into use as basic facts and figures in developing and applying a curriculum associated with CAM. Methods: Q methodology was employed to explore the nursing students' subjectivity from their rank-order statements. For the Q population, individual in-depth interviews and literature research were conducted. Finally, 30 participants completed 40 Q statements. The data were analyzed using the QUANL software package. Results: The current survey that probed into the subjectivity of the nursing students relative to CAM abstracted four categories, namely, practical and convinced type, keep-under-control/wait-and-see type, merit acknowledging type and limitedly accepting type. Conclusion: It is recommended that various educational programs should be developed to shift the awareness of CAM on the part of the nursing students, based on the findings set forth in the current study.

• Natural Product Sciences
• /
• v.20 no.4
• /
• pp.227-231
• /
• 2014

Cimicifuga heracleifolia extract (CHE) was investigated for its effects on the release of nitric oxide (NO) and at the level of inducible nitric oxide synthase (iNOS) gene expression in mouse macrophages. We found that C. heracleifolia elicited a dose-dependent increase in NO production and the level of iNOS mRNA. Since, iNOS transcription has been shown to be under the control of the transcription factor $NF-{\kappa}B$, the effects of CHE on $NF-{\kappa}B$ activation were examined. Transient expression assays with $NF-{\kappa}B$ binding sites linked to the luciferase gene revealed that the increased level of iNOS mRNA, induced by CHE, was mediated by the $NF-{\kappa}B$ transcription factor complex. By using DNA fragments containing the $NF-{\kappa}B$ binding sequence, CHE was shown to activate the protein/DNA binding of $NF-{\kappa}B$ to its cognate site, as measured by electrophoretic mobility shift assay. These results demonstrate that C. heracleifolia stimulates NO production and is able to up-regulate iNOS expression through $NF-{\kappa}B$ transactivation.

• Archives of Plastic Surgery
• /
• v.40 no.4
• /
• pp.312-319
• /
• 2013

Over the past decade, driven by advances in educational theory and pressures for efficiency in the clinical environment, there has been a shift in surgical education and training towards enhanced simulation training. Microsurgery is a technical skill with a steep competency learning curve on which the clinical outcome greatly depends. This paper investigates the evidence for educational and training interventions of traditional microsurgical skills courses in order to establish the best evidence practice in education and training and curriculum design. A systematic review of MEDLINE, EMBASE, and PubMed databases was performed to identify randomized control trials looking at educational and training interventions that objectively improved microsurgical skill acquisition, and these were critically appraised using the BestBETs group methodology. The databases search yielded 1,148, 1,460, and 2,277 citations respectively. These were then further limited to randomized controlled trials from which abstract reviews reduced the number to 5 relevant randomised controlled clinical trials. The best evidence supported a laboratory based low fidelity model microsurgical skills curriculum. There was strong evidence that technical skills acquired on low fidelity models transfers to improved performance on higher fidelity human cadaver models and that self directed practice leads to improved technical performance. Although there is significant paucity in the literature to support current microsurgical education and training practices, simulated training on low fidelity models in microsurgery is an effective intervention that leads to acquisition of transferable skills and improved technical performance. Further research to identify educational interventions associated with accelerated skill acquisition is required.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.106-114
• /
• 2016

In this paper, we propose an efficient integer inverse transform structure for vp9 decoder. The proposed structure is a hardware structure which is easy to control and requires less hardware resources, and shares algorithms for realizing entire DCT(Discrete Cosine Transform), ADST(Asymmetric Discrete Sine Transform) and WHT(Walsh-Hadamard Transform) in vp9. The integer inverse transform for vp9 google model has a fast structure, named butterfly structure. The integer inverse transform for google C model, unlike universal fast structure, takes a constant rounding shift operator on each stage and includes an asymmetrical sine transform structure. Thus, the proposed structure approximates matrix coefficient values for all transform mode and is used to matrix operation method. With the proposed structure, shared operations for all inverse transform algorithm modes can be possible with reduced number of multipliers compared to the butterfly structure, which in turn manages the hardware resources more efficiently.