• 한국방사선학회논문지
• /
• 제17권4호
• /
• pp.497-506
• /
• 2023

의료기관의 방사선 업무 종사자의 경우 환자 보호와 정확한 시술을 위해 방사선 노출이 이루어져 저선량 피폭의 문제점을 안고 있다. 저선량 방사선 피폭은 주로 Apron 영역 이외에 신체 부분에서 발생되며, 가장 많은 곳이 손 등 피부이다. 특히, 의료인의 손은 시술 중 감각과 미세한 동작을 필요로 하기에 방사선 노출영역에서는 무방비 상태로 피폭의 위험성을 안고 있다. 납장갑 등 차폐체로 문제를 해결할 수 있지만, 이는 시술 중 손의 활동성을 제안하여 사용상의 어려움이 있다. 이러한 문제점을 해결하고자 기능성 방사선 보호효과를 얻을 수 있는 차폐크림을 개발하여 납당량 0.1 mmPb와 차폐성능을 비교하였다. 차폐크림 제조과정에서 크림의 밀도를 높이기 위해 기공을 줄이는 탈포과정을 추가하여 차폐성능을 개선하였다. 따라서 황산바륨을 주 재료로 사용한 차폐크림은 납 plate보다 차폐율이 낮은 실효에너지 영역에서는 59%, 높은 실효에너지에서는 37% 정도의 차이는 보여 기능성 방사선 방어효과가 있는 것으로 나타났다. 따라서 피부에 직접 사용할 수 있는 장점으로 상시 방어효과와 수술용 장갑 착용전에 사용이 가능한 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1538-1540
• /
• 1999

For the development of electro magnetic shielding materials by use of the conductive polymer, measuring technique related to their shielding effect should be well established. For this propose, several commercialized techniques based on different conception have been well compared in order to adopt appropriate method to our materials under development and then, flanged coaxial holder type fixture device has been fabricated and tested satisfied performance has been obtained showing over 90dB in dynamic range with accuracy of +/-2dB.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.78-82
• /
• 2011

In this paper, magnetic field compensation system with an open architecture and can be installed indoors is designed and measured by fabricated. To verify the shielding effectiveness, two rectangular helmholtz coils with 3-axis are fabricated to generate magnetic field and measured magnetic field inside compensation coil for 1~60[Hz], According to measurements, AC shielding effectiveness of compensation system is 96[%] of 1[Hz], 95[%] of 30[Hz] and 90[%] of 60[Hz]. The performance of system therefore can be used as the magnetically shielded room for medical and industrial field.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.13-19
• /
• 2005

The performance of two designs of permanent magnet brushless motor, by having self-shielding magnetized magnets or sinusoidally shaped parallel-magnetized magnets with essentially sinusoidal airgap flux distributions, are compared. It is shown that the parallel-magnetized motor with shaped sintered NdFeB magnets can result in a higher airgap flux density and torque density than that of a self-shielding magnetized motor equipped with an anisotropic injection moulded NdFeB ring magnet.

• 전자통신동향분석
• /
• 제35권4호
• /
• pp.11-20
• /
• 2020

With the widespread use of high-performance electronics and mobile communications, electromagnetic interference (EMI) shielding has become crucial for protection against malfunctioning of electronic equipment and harmful effects to human health. In addition, smart sensor technologies will be rapidly developed in untact (non-contact) environments and personal healthcare fields. Herein, we introduce our recently developed technologies for flexible multifunctional EMI shielding, and highly sensitive wearable pressure-strain and humidity sensors realized using low-dimensional nanomaterials.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.235-240
• /
• 2002

In this paper, we investigated the current limiting characteristic in the magnetic shielding type fault current limiter(MSFCL). The circuit analysis was executed by using finite differential method(FDM). This paper suggests that the current limiting performance can be achieved in two ways (resistive and inductive one), according to design parameter. By comparing current limiting characteristics in two ways and surveying the important parameters which determine the operational way after fault occurs in the design of MSFCL, it is shown that the magnetic shielding type fault current limiter can be operated in either resistive or inductive way.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.853-859
• /
• 2019

A comprehensive study of photon interaction features has been made for some alloys containing Pd and Ag content to evaluate its possible use as alternative gamma radiations shielding material. The mass attenuation coefficient (${\mu}/{\rho}$) of the present alloys was measured at various photon energies between 81 keV-1333 keV utilizing HPGe detector. The measured ${\mu}/{\rho}$ values were compared to those of theoretical and computational (MCNPX code) results. The results exhibited that the ${\mu}/{\rho}$ values of the studied alloys are in the same line with results of WinXCOM software and MCNPX code results at all energies. Moreover, Pd75/Ag25 alloy sample has the maximum radiation protection efficiency (about 53% at 81 keV) and lowest half value layer, which shows that Pd75/Ag25 has superior gamma radiation shielding performance among the other compared alloys.

• 한국분말재료학회지
• /
• 제31권1호
• /
• pp.57-76
• /
• 2024

Recent advancements in electronic devices and wireless communication technologies, particularly the rise of 5G, have raised concerns about the escalating electromagnetic pollution and its potential adverse impacts on human health and electronics. As a result, the demand for effective electromagnetic interference (EMI) shielding materials has grown significantly. Traditional materials face limitations in providing optimal solutions owing to inadequacy and low performance due to small thickness. MXene-based composite materials have emerged as promising candidates in this context owing to their exceptional electrical properties, high conductivity, and superior EMI shielding efficiency across a broad frequency range. This review examines the recent developments and advantages of MXene-based composite materials in EMI shielding applications, emphasizing their potential to address the challenges posed by electromagnetic pollution and to foster advancements in modern electronics systems and vital technologies.

• 한국건설순환자원학회논문집
• /
• 제11권3호
• /
• pp.234-243
• /
• 2023

전자파(EMP)는 고출력 전자파의 총칭으로 핵무기에서 발생하는 EMP, 비핵 EMP, 자연현상에 의해 발생하는 EMP로 분류된다. 전자파는 통신기기, 휴대폰, 컴퓨터, TV, 교통수단 등 전자기적 요소를 지닌 모든 전자장치에 치명적인 손상을 줄 수 있는 수단이다. 본 연구에서는 탄소 재료를 이용한 EMP 차폐 무기 도료 개발을 위해 탄소 재료의 종류와 함량에 따른 도료의 EMP 차폐성능 평가를 수행하였다. 도료 제조에 사용된 원재료들의 상용성 및 분산성 향상을 분석하기 위해 약 27종의 배합으로 총 2회에 걸쳐 실험을 진행하였고, 전기저항 측정법을 이용하여 EMP 차폐 효과를 평가하였다. 본 연구를 통해 개발된 EMP 차폐 도료를 차폐 콘크리트에 적용한 결과 약 25 dB에서 최대 40 dB까지 차폐성능이 향상되는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.301-308
• /
• 2024

Ceramic materials are being explored as alternatives to toxic lead sheets for radiation shielding due to their favorable properties like durability, thermal stability, and aesthetic appeal. However, crafting effective ceramics for radiation shielding entails complex processes, raising production costs. To investigate local viability, this study evaluated Malaysian ceramic tiles for shielding in diagnostic X-ray rooms. Different ceramics in terms of density and thickness were selected from local manufacturers. Energy Dispersive X-ray Fluorescence (EDXRF) and X-ray Fluorescence (XRF) characterized ceramic compositions, while Monte Carlo Particle and Heavy Ion Transport code System (MC PHITS) simulations determined Linear Attenuation Coefficient (LAC), Half-value Layer (HVL), Mass Attenuation Coefficient (MAC), and Mean Free Path (MFP) within the 40-150 kV energy range. Comparative analysis between MC PHITS simulations and real setups was conducted. The C3-S9 ceramic sample, known for homogeneous full-color structure, showcased superior shielding attributes, attributed to its high density and iron content. Notably, energy levels considerably impacted radiation penetration. Overall, C3-S9 demonstrated strong shielding performance, underlining Malaysia's potential ceramic tile resources for X-ray room radiation shielding.