• Journal of Microbiology and Biotechnology
• /
• v.28 no.6
• /
• pp.1022-1029
• /
• 2018

Tuberculosis (TB) remains a serious health issue around the word. Adenovirus (Ad)-based vaccine and modified vaccinia virus Ankara (MVA)-based vaccine have emerged as two of the most promising immunization candidates over the past few years. However, the performance of the homologous and heterologous prime-boost immunization regimens of these two viral vector-based vaccines remains unclear. In the present study, we constructed recombinant Ad and MVA expressing an Ag85B-TB10.4 fusion protein (AdH4 and MVAH4) and evaluated the impact of their different immunization regimens on the humoral and cellular immune responses. We found that the viral vector-based vaccines could generate significantly higher levels of antigen-specific antibodies, $IFN-{\gamma}$-producing splenocytes, $CD69^+CD8^+$ T cells, and $IFN-{\gamma}$ secretion when compared with bacillus Calmette-$Gu{\acute{e}}rin$ (BCG) in a mouse model. AdH4-containing immunization regimens (AdH4-AdH4, AdH4-MVAH4, and MVAH4-AdH4) induced significantly stronger antibody responses, much more $IFN-{\gamma}$-producing splenocytes and $CD69^+CD8^+$ T cells, and higher levels of $IFN-{\gamma}$ secretion when compared with the MVAH4-MVAH4 immunization regimen. The number of $IFN-{\gamma}$-producing splenocytes sensitive to $CD8^+$ T-cell restricted peptides of Ag85B (9-1p and 9-2p) and Th1-related cytokines ($IFN-{\gamma}$ and $TNF-{\alpha}$) in the AdH4-MVAH4 heterologous prime-boost regimen immunization group was significantly higher than that in the other viral vector-based vaccine- and BCG-immunized groups, respectively. These results indicate that an immunization regimen involving AdH4 may have a higher capacity to induce humoral and cellular immune responses against TB in mice than that by regimens containing BCG or MVAH4 alone, and the AdH4-MVAH4 prime-boost regimen may generate an ideal protective effect.

• Environmental Analysis Health and Toxicology
• /
• v.11 no.1_2
• /
• pp.19-29
• /
• 1996

Human exposure to volatile compounds in tap water can occur from inhalation and dermal absorption as well as direct ingestion. The relative contribution to total human exposure from these pathways has been considered to be important especially for VOC's (volatile organic compounds). In an attempt to reduce the uncertainty of the risk assessment, it has been suggested that the exposure assessment process could be significantly improved by adopting Monte-Carlo simulation. However, there is no actual data in Korea for each exposure parameter to determine the level of exposure, and the distributional pattern. Therefore, we surveyed water use patterns and behavior related to multi-route exposure to VOC's in household tap water in Korea, and compared these values to the those in western countries. In the first survey, we calculated daily water intake using data from a sample of 1322 persons of several cities in Korea. In the second survey, we obtained questionnaire data on exposure time for showering, bathing and household activities, and tap water intake from 851households in Korea. In the last survey, we measured the exposure parameters (exposure time, water use rate etc.) related to showers, baths, toilets, dish washing, washing and cooking, and tap water intake was surveyed. Also, the subjects were measured their body weight, height and tidal volume, etc. A diary, a flow meter and a measuring cup were used to measure these values as precisely as possible. Average daily water intake was ranged 0.79-1.71 L/day for adults in three surveys. Tap water intake measured by log-sheet during one week in third survey was 1.26 (average), 1.98 L/day (90 percentlie), respectively. These results were comparable with results from EPA (1.4, 2L/day). The average amount of water used by housewives in the third survey was 515.0 $\pm$ 564.6L/day. In usual activity, the amount of water used in the bathroom, the laundry and the kitchen was 140.0 $\pm$ 538.9, 148.0 $\pm$ 174.5, 229.3 $\pm$ 205.4 L/day, respectively. Exposure parameters such as water intake rate, exposure duration, body weight, inhalation rates in surveyed data of Korean people differed from those published from western countries. This could be attributed to variations in lifestyle, dietary habits and physiological characteristics.

• Journal of Surface Science and Engineering
• /
• v.40 no.6
• /
• pp.254-257
• /
• 2007

TiN coating on tool steel has been widely used for the improvement of durability of tools. In this work, radical nitriding(RN) is carried out on SKD61 at $450^{\circ}C$ for 5 hours in the ammonia gas pressure $2.7{\times}10^3\;Pa$. The TiN coating is carried out by arc ion plating(AIP) with the process parameters: arc power 150 A, bias voltage -50V, coating time 40 minutes and nitrogen gas pressure $4{\times}10^3\;Pa$. Hardness, elastic modulus, friction coefficient and adhesion of TiN coating on substrates of both TiN/SKD61 and TiN/RN SKD61 coatings are investigated comparatively. The primary crystalline faces of TiN surface are(200) and(111) for TiN/SKD61 and TiN/RN SKD61 respectively. In addition to the primary phase, Fe phase exists in TiN/SKD61 coating, but not in TIN/RN SKD61. The hardness of TiN/RN SKD61 is about 700 Hv, 250 Hv(56%) higher than that of TiN/SKD61 at the near interface of TiN and substrates. At the TiN surface, hardness of TiN/RN SKD61 is 2,149 Hv, 71 Hv(3%) higher than that of TiN/SKD61. The elastic modulus of TiN coating is improved to 26.7 GPa(6%) by radical nitriding. The adhesion is improved by the RN coating showing no spalling. buckling and chipping on the scratch test track which are shown on the non-RN TiN/SKD61.

• Journal of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.149-154
• /
• 1984

The electrical conductivity of p-type yttrium sesquioxide has been measured as a function of temperature and of oxygen partial pressure at temperatures from 650 to 1050$^{\circ}C$C and oxygen partial pressures from $1 {\times}10^{-5}\;to\;2{\times}10^{-1}$atm. Plots of log conductivity vs. 1/T at constant oxygen partial pressures are found to be linear with low-and high-temperature dependences of conductivity. The high-temperature dependence of conductivity shows two different defect structures. The plots of log conductivity vs. log $Po_2$ are found to be linear at $Po_2$'s of $10^{-5}\;to\;10^{-1}$ atm. The electrical conductivity dependences on $Po_2$ are found to be ${{\sigma}{\propto}Po_2}^{1/6}$at $850{\sim}950^{\circ}C,\;{{\sigma}{\propto}Po_2}^{3/16}$ at $950{\sim}1050^{\circ}C\;and\;{{\sigma}{\propto}Po_2}^{1/7.5}{\sim}{{\sigma}{\propto}Po_2}^{1/8.3}\;at\;650{\sim}800^{\circ}C$, respectively. The defect structures are$O_i{''}$ at $850{\sim}950^{\circ}C$ and $V_M{'''}$ at $950{\sim}1050^{\circ}C$. The electron hole is main carrier type, however, ionic contribution is found at lower temperature portion.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.323-332
• /
• 1976

The x or $x^0+x'$ values of the nonstoichiometric chemical formula $TiO_{2-x}$ or $Ti_{2-(x^0+x')}$ have been measured by a specially made magnetic quartz microbalance in a temperature range from 600 to $1300^{\circ}C$ under oxygen pressures of $1{\times}10^{-6} to 1 atm. The standard x or $x^0$ value of the rutile is 0.00148. The x values $under_xoxygen$ pressure of 1 atm decrease with temperatures and then the stoichiometric rutile (or x = 0) is formed at $1130^{\circ}C$. The x values varied between 0.00148 and 0.01719 at a temperature range from 600 to $1300^{\circ}C$ under $1{\times}10^{-9}{\sim}1{\times}10^{-2}$ atm oxygen pressures. The enthalpies of formation of the nonstoichiometric rutile, $H_f$, varied between 21.05 and 29.97 Kcal/mole under the above conditions. The 1/n values calculated from the plots of log X' vs. log $Po_2$ are -{\frac{1}{2}}{\sim}-{\frac{1}{4}} under low oxygen pressure range of $1{\times}10^{-6}\;to\;1{\times}10^{-4}$ atm. Many physical properties of the titanium dioxide, such as the stability of the rutile, Electrical conductivity, catalytic activity and defects, can be explained through the x values and the thermodynamic data calculated from the temperature and oxygen pressure dependences of the x' values.

• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.608-614
• /
• 1985

Electrical conductivities of $ZrO_2-Sm_2O_3$ systems containing 10, 20, 30, 40, and 50 mol% of $ZrO_2$ have been measured as a function of temperature and of oxygen partial pressure at temperature from 500 to 1000${\circ}C$ and oxygen partial pressures from 1 ${\times}10^{-5}to 1{\times}10^{-1}$ atm. Plots of log conductivity vs. 1/T are found to be linear with an inflection point at around 650$^{\circ}C$ and the temperature dependence of conductivity shows two different defect structures. The conductivities are increased with increasing pressure, slowing a p-type character. The electrical conductivity dependences on $Po_2$ are found to be ${\sigma}{\propto}Po_2^{1/5.3}$ at 650∼1000$^{\circ}C$ and ${\sigma}{\propto}Po_2^{1/6}$ at 500∼650$^{\circ}C$, respectively, The defect structures are Oi" at 650-1000$^{\circ}C$ and $Vs_m$"' at 500-650$^{\circ}C$. The electron hole is main carrier type, however ionic contribution is found at low temperature portion. Ionic contributions increased with the increasing amount of $ZrO_2$ dopant. In 60mol% $ZrO_2-Sm_2O_3$ system, the conductivity is increased with decreasing oxygen pressure.

• Composites Research
• /
• v.28 no.6
• /
• pp.395-401
• /
• 2015

This study investigated the thermal stability of Grubbs' catalyst and its reactivity with self-healing agents for self-healing damage repair. Four types of Grubbs' catalyst supplied by manufacturers were considered and each catalyst was tested in as-received and grinded conditions. Four types of self-healing agents were prepared by varying the mixing ratio of dicyclopentadiene (DCPD) and 5-ethylidene-2-norbonene (ENB). Heat flows as a function of temperature were measured through a differential scanning calorimetry (DSC) to determine the thermal stability of catalysts. Reaction heats of self-healing agents with the catalyst were measured to evaluate the reactivity of the catalyst. For this evaluation, Fluka Chemika Grubbs' catalyst was used based on the maximum temperature and the time to reach the maximum temperature. According to the results, catalysts had different shapes depending on the manufacturer and the results showed that the smaller the size of the catalyst the higher the reactivity with self-healing agents. As the ENB ratio in self-healing agents increased, the maximum temperature increased, and the time to reach the maximum temperature decreased. As the amount of the catalyst increased, the maximum temperature increased, and the time to reach the maximum temperature decreased. Considering the thermal stability of the catalyst and its reactivity with the self-healing agent, combination of 0.5 wt% catalyst and the D3E1 self-healing agent was optimal for self-healing damage repair. Finally, as the thermal decomposition may occur depending on the environmental temperature, the catalyst must not be exposed to temperature higher than that is necessary to maintain the thermal stability of the catalyst.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2001.11a
• /
• pp.19-29
• /
• 2001

Nutrients are key environmental factors in marine ecosystem. They limit algal growth when at low concentrations and cause algal bloom when at high contents. They also control the growth and succession of many other biota including bacteria and zooplankton, either directly or indirectly. Nutrient contents therefore affect both the structure and functions of marine ecosystem. To study the contents and distribution of nutrients in Chinese Bohai Sea, two cruise surveys were undertaken in August 2000 (summer) and January 2001 (winter), respectively. A total of 595 water samples were collected from 91 sites. After collection the samples were transported to the laboratory and five nutrients, i.e., nitrate, nitrite, ammonia, phosphate and silicate, were analyzed. The results showed that tile average concentration of total inorganic nitrogen (TIN) in Bohai Sea in winter (6.5293.717 ${\mu}$mol$.$l$\^$-1/) was significantly higher than that in summer (3.717 ${\mu}$mol$.$l$\^$-1/). The phosphorus concentration in winter (0.660 ${\mu}$mol$.$l$\^$-1/) was also significantly higher than that in summer (0.329 ${\mu}$mol$.$l$\^$-1/). Mean silicate concentration in winter (7.858 ${\mu}$mol$.$l$\^$-1/) was not significantly different from that in summer (7.200 ${\mu}$mol$.$l$\^$-1/). Nutrients also varied considerable among different areas within Bohai Sea. TIN concentration in Laizhou Bay (4.444 ${\mu}$mol$.$l$\^$-1/), for example, was significantly higher than those in Bohai Bay (2.270 ${\mu}$mol$.$l$\^$-1/) and Bohai Straight (2.431 ${\mu}$mol$.$l$\^$-1/), which probably reflects tile discharge of large amounts of nitrogen into Laizhou Bay via Yellow River. The nutrients also showed vertical distribution pattern. In summer, nutrients in bottom layer were generally higher than those in surface and medium layers. In winter, however. nutrients in different layers were not significantly different Compared with historic data, TIN contents increased continuously since early 1980s, phosphorus arid silicone contents, nevertheless, fell down to some degree. Based on atomic ratios of different nutrients, nitrogen is still the main limiting factor for algal growth in Bohai Sea.

• Journal of Korean Medicine Rehabilitation
• /
• v.15 no.2
• /
• pp.141-154
• /
• 2005

Objectives : This study was planned to evaluate clinical status of the alopecia patients who had visited oriental medicine clinic. Methods : 80 patients with alopecia, who had visited oriental medicine clinic from January 2004 to August 2004, were examined. Results & Conclusions : 1. The kinds and incidences of Alopecia : androgenetic alopecia 57.5%(46/80), alopecia areatea 20.0%(16/80), telogen effluvium 16.3%(13/80), seborrheic alopecia 6.3%(5/80). 2. In distribution of sex, the rate of male to female was 1:1 and most patients belonged to 20-30 year old group. 3. The most common onset of age was adolescence(63.8%) and the most common duration of hair loss was 1 to 3 years. 4. Among the 30 male androgenetic alopecia patients, Hamilton's type 4 was most common and among the 16 female androgenetic alopecia patients, Ludwig's type II and III were most common. 5. Family history of baldness in Androgenetic alopecia and alopecia areata were 56.5% and 25.0%, respectively. 6. Self-conscious causes of hair loss : stress(48.8%), irregular eating habits(21.3%), and lack of sleep(20.0%). 7. Associated diseases with alopecia patients : chronic neck pain(58.8%), temporomandibular disorders(55.0%) and seborrheic dermatitis(20.0%). 8. Associated symptoms with alopecia Patients : stress(78.8%), sleep disorders(68.8%), irregular eating habits(55.0%), Hot flush(43.8%), Stool disorders(43.8%), cold hands and feet(37.5%) and menstruation disorders(31.3%). 9. The most common scalp type was oily scalp(70.0%) and the symptoms of scalp were iching, dandruff, pain, inflammation. 10. $Bi{\grave{a}}n$ $zh{\grave{e}}ng$(辨證) of alopecia patients : $xu{\grave{e}}-r{\grave{e}}-f{\bar{e}}ng-z{\grave{a}}u$(血熱風燥) (25.0%), $g{\bar{a}}n-sh{\grave{e}}n-b{\grave{u}}-z{\acute{u}}$(肝腎不足) (23.8%), $shi-r{\grave{e}}-sh{\grave{a}}ng-zh{\bar{e}}ng$(濕熱上蒸) (16.3%), $xu{\grave{e}}-r{\grave{e}}-sh{\bar{e}}ng-f{\bar{e}}ng$(血熱生風) (13.8%), $xu{\grave{e}}-x{\bar{u}}-f{\bar{e}}ng-z{\grave{a}}u$(血熱風燥) (13.8%), $y{\bar{u}}-xu{\grave{e}}-z{\check{u}}-lu{\grave{o}}$(瘀血阻絡) (7.5%).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.274-279
• /
• 2009

The levels of minerals, amino acids, fatty acids and sugars and antioxidant capacity of Adenophora triphylla (AT) root were investigated. The moisture, crude protein, crude lipid, crude ash and carbohydrate contents of the AT root were $3.4{\pm}0.3,\;9.4{\pm}0.1,\;1.6{\pm}0.1,\;3.7{\pm}0.2$, and $81.9{\pm}0.5$, respectively. Among the minerals present in root, potassium content was the highest. Total amino acid contents were $103.5{\pm}9.1$ mg/g. Palmitic acid was the most abundant fatty acid in AT root. The vitamin E and C levels in AT root were $1.1{\pm}0.1$ and $5.2{\pm}0.5$ mg/100 g, respectively. The antioxidant activity of 70% ethanol extract and fractions of the AT root has been determined by the scavenging of the stable radical DPPH; the result showed that the chloroform fraction was the most active, as the amount required for 50% reduction of DPPH after 30 min ($RC_{50}$) was $103.7{\mu}g$, followed by 70% ethanol extract ($265.4{\mu}g$), hexane fraction ($104.4{\mu}g$), ethyl acetate fraction ($104.4{\mu}g$), butanol fraction ($108.9{\mu}g$) and aqueous fraction ($484.1{\mu}g$).