• Steel and Composite Structures
• /
• v.44 no.4
• /
• pp.519-529
• /
• 2022

Sandwich structures with the superior mechanical properties such as high stiffness and strength-to-weight ratio, good thermal insulation, and high energy absorption capacity are used today in aerospace, automotive, marine, and civil engineering industries. These structures are composed of moderately stiff, thin face sheets that withstand the majority of transverse and in-plane loads, separated by a thick, lightweight core that resists shear forces. In this research, the finite element technique is used to simulate a sandwich panel with a truss core under axial compressive stress using ABAQUS software. A review of past experimental studies shows that the bondline between the core and face sheets plays a vital role in the critical failure load. Therefore, this modeling analyzes the damage initiation modes and debonding between face sheet and core by cohesive surface contact with traction-separation model. According to the results obtained from the modeling, it can be observed that the adhesive stiffness has a significant influence on the critical failure load of the specimens. To achieve the full strength of the structure as a continuum, a lower limit is obtained for the adhesive stiffness. By providing this limit stiffness between the core and the panel face sheets, sudden failure of the structure can be prevented.

• Transactions of Materials Processing
• /
• v.33 no.2
• /
• pp.112-117
• /
• 2024

In this study, the friction and wear characteristics of Inconel 600 in the superplastic forming process of Ti6Al4V were evaluated through pin-on-disc tests. To achieve an efficient and systematic experimental design, the Taguchi method was employed. The wear track of the Inconel 600 pin showed scratches in the sliding contact direction, confirming that the wear mechanism is abrasive wear. Through sensitivity analysis such as ANOVA and Main effects, it was confirmed that both normal force and sliding distance have a significant impact on the wear. Changes in sliding velocity and distance did not affect the friction coefficient, which remained relatively constant at approximately 0.380. The wear prediction model for Inconel 600 in the superplastic forming of Ti6Al4V was constructed, which can be utilized as a guideline for the prediction and management of tool wear.

• Safety and Health at Work
• /
• v.15 no.3
• /
• pp.368-372
• /
• 2024

Occupational use of cleaning products can cause asthma in healthcare workers but the cleaning agents responsible are not yet known. This study aimed to identify respiratory and other hazards in cleaning products on the National Health Service (NHS) supply chain online catalogue and used in the NHS. Information on cleaning products, their composition, and H-statements that identified hazard characteristics of chemical substances in them was obtained from chemical safety data sheets (SDSs). Furthermore, a quantitative structure-activity relationship model and a published asthmagen list were used to identify potential additional respiratory hazards. 473 cleaning products and 229 substances were identified. SDSs reported only 4 respiratory sensitizers but an additional 51 were suggested by the other 2 methods. In contrast, 25 respiratory irritants were identified using SDSs and only one from the asthmagen list. This comprehensive overview of cleaning agents' hazards has potential use in future risk assessment and epidemiological studies.

• Asia Marketing Journal
• /
• v.11 no.1
• /
• pp.39-72
• /
• 2009

With the growing importance of accountability, it is getting necessary to test the impact of marketing expenditure on marketing performance. Including recent ROM, we can find a few researches about marketing accountability. But there are a few problems about definitions and metric of marketing expenditure and marketing performance. Therefore, by defining and analyzing the impact of marketing expenditure on marketing performance, we are going to set the classification scheme of marketing expenditure and marketing performance. Based on research findings, new definitions and metrics are proposed as follows. First, we suggest the classification scheme of marketing expenditure. Marketing expenditure is defined as expense accounts in the balance sheet for doing marketing tasks. Marketing expenditures includes many accounts, for example, marketing research, advertising, sales promotion, foreign market development, physical distribution, after services. Among these marketing investment, advertising expenses have a positive effect on marketing performance. Second, we suggest the classification scheme of marketing performance. Already, marketing performance has been defined as financial metrics, customer metrics, market metrics, and corporate social responsibility. But, in this study, we find that the process model is not relevant for explaining association between the performance metrics. The process model is a virtuous cycle: "customer metrics→market metrics→financial metrics→firm valuation metrics." But, in this study, it is not supported or a little significant association between these metrics. Based on these results, we suggest the balance model or flower model as the classification scheme of marketing performance.

• Journal of the Korean Dietetic Association
• /
• v.8 no.4
• /
• pp.398-407
• /
• 2002

This study is for confirming and finding which kinds of parameter is on Service Quality and Customer Loyalty of Foodservice Operation. For this, the purpose of the study is investigating the relationship between A Customer Loyalty and the factors which would affect it, relative influence-relation about meditate roles of influence-factors. A study model and several hypotheses were developed regarding the relationships. Moreover, after making a question sheet, based on the collected and analyzed 250 of them. The study model was analyzed with, SPSS 10.0 and AMOS 4.0 program. At first, when the quality of service is high, it directly affects Customer satisfaction. With the result from the study, it is prove that the service quality is very important. On the other hand, the service quality do not directly affect the Customer Loyalty. The second, when the value of service is high, it affects the customer-satisfaction. But, although the value of service is high, it doesn't directly affect the Customer Loyalty. So, it is clear that the value of Service on Foodservice Operations is the variable precedent of customer-satisfaction. The third, when the customer-satisfaction is high, customer loyalty is high. It is necessary to make the strategy about the management of Foodservice for keeping customer-satisfaction steadily. According to this study, the important variables are the value of service, the service quality and customer-satisfaction. With these results, we have to manage the factors for keeping the Customer Loyalty in Foodservice Operations.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.71-75
• /
• 2009

Purpose: Recently, orbital wall fracture is common injuries in the face. Facial CT is essential for the accurate diagnosis and appropriate treatment to reconstruct of the orbital wall. The objective of this study was to report the method for accurate measurement of area and shape of the bony defect in the blow-out fractures using facial CT in prior to surgery. Methods: The authors experienced 46 cases of orbital wall fractures and examined for diplopia, sensory disturbance in the area of distribution of the infraorbital nerve, and enophthalmos in the preoperation and followed 1 months after surgery, from August 2007 to May 2008. Bony defect was predicted by measuring continuous defect size from 3 mm interval facial CT. Copying from the defect model (template), we reconstructed orbital wall with resorbable sheet (Inion $CPS^{(R)}$ Inion Oy, Tampere, Finland). Results: One months after surgery using this method, 26 (100%) of the 26 patients improved in the diplopia and sensory disturbance in the area of distribution of the infraorbital nerve. Also 8 (72.7%) of the 11 patients had enophthalmos took favorable turn. Conclusion: This accurate and time-saving method is practicable for determining the location, shape and size of the bony defect. Using this method, we can reconstruct orbital wall fracture fastly and precisely.

• Journal of the Korea Concrete Institute
• /
• v.15 no.5
• /
• pp.635-642
• /
• 2003

Although the strengthening effect of deteriorated concrete bridge decks has been studied by various authors, most researches are focused on the experimental works on the pulsating loading in laboratory in spite of deterioration of deck caused by moving vehicle loads. In this research, a theoretical live load model that was proposed to reflect an effect of moving vehicle loads is formulated from a statistical approach on the measurement of real traffic loads for various time periodsin Korea. Fatigue life and strengthening effect of strengthened bridge decks strengthened with either Carbon Fiber Sheet or Grid typed Carbon Fiber Polymer Plastic by the probabilistic and the reliability analyses are assessed. As a results, secondary bridge deck (DB18) strengthened with FRP ensures a sufficient fatigue resistance against the increased traffic loads as well as load carrying capacity in life cycle.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.718-725
• /
• 2002

A wall type friction damper is newly Proposed in this paper to improve the performance of R/C framed structures under earthquake loads. Although traditional dampers are usually placed as bracing members, the application ot bracing-type dampers into R/C structures is not as simple as those of steel structures due to the connection between R/C members and dampers and the stress concentration in connection region. Proposed damper is consisted of Teflon-sheet slider and R/C shear wall. The damper can also avoid stress concentration and reduce P-Δ effect. To evaluate the performance of proposed damper, nonlinear dynamic analyses are carried on 10 story and 3 bay R/C structures with numerical model for the damper. It is shown that the damper reduces the inter-story drifts and the time-historic responses; especially the damper prevents from forming plastic hinges on the lower columns.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.3
• /
• pp.51-60
• /
• 2004

In Korea there are recently many attempts to expand a temporary soil nailing system into a permanent soil nailing system since the first construction in 1993. In the soil nailing system, the rigid facing walls act on restraining the deformation of the ground. These are purposed to minimize the damage of adjacent buildings or underground structures. In Korea, to minimize the relaxation of the ground, the soil nailing system in the downtown area is often used experientially together with braced cuts, sheet pile walls, soil cement walls (SCW), or jet grouting walls. However, for the conservative design, the confining effects by the stiff facing have been ignored because the proper design approach of considering the facing stiffness has not been proposed. In this study, various laboratory model tests are carried out to examining the influence the rigidity of facings on the global safety of soil nailing system. Also, the parametric studies using the numerical technique as shear-strength reduction technique are carried out. In the parametric study, the thickness of concrete facing walls is changed to identify the effects of the facing wall stiffness.

• BMB Reports
• /
• v.39 no.3
• /
• pp.284-291
• /
• 2006

In this study, the cDNA of a new peptide from the venom of the scorpion, Buthotus saulcyi, was cloned and sequenced. It codes for a 64 residues peptide (Bsaul1) which shares high sequence similarity with depressant insect toxins of scorpions. The differences between them mainly appear in the loop1 which connects the $\beta$-strand1 to the $\alpha$-helix and seems to be functionally important in long chain scorpion neurotoxins. This loop is three amino acids longer in Bsaul1 compared to other depressant toxins. A comparative amino acid sequence analysis done on Bsaul1 and some of $\alpha$-, $\beta$-, excitatory and depressant toxins of scorpions showed that Bsaul1 contains all the residues which are highly conserved among long chain scorpion neurotoxins. Structural model of Bsaul1 was generated using Ts1 (a $\beta$-toxin that competes with the depressant insect toxins for binding to $Na^+$ channels) as template. According to the molecular model of Bsaul1, the folding of the polypeptide chain is being composed of an anti-parallel three-stranded $\beta$-sheet and a stretch of $\alpha$-helix, tightly bound by a set of four disulfide bridges. A striking similarity in the spatial arrangement of some critical residues was shown by superposition of the backbone conformation of Bsaul1 and Ts1.